[PATCH RFT 1/3] dt-bindings: usb: qcom,dwc3: Allow high-speed interrupt on Glymur, Hamoa and Milos

Abel Vesa posted 3 patches 3 weeks, 6 days ago
[PATCH RFT 1/3] dt-bindings: usb: qcom,dwc3: Allow high-speed interrupt on Glymur, Hamoa and Milos
Posted by Abel Vesa 3 weeks, 6 days ago
Some of the controllers found of these platforms can be tied up to a
single high-speed PHY, basically rendering them as USB 2.0 controllers.
So in this case, the interrupt to the Synopsys DesignWare Core is coming
from the high-speed PHY, so allow the interrupt to reflect that.

Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
index 7d784a648b7d..f879e2e104c4 100644
--- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
@@ -500,7 +500,7 @@ allOf:
             - const: pwr_event
             - const: dp_hs_phy_irq
             - const: dm_hs_phy_irq
-            - const: ss_phy_irq
+            - enum: [hs_phy_irq, ss_phy_irq]
 
   - if:
       properties:

-- 
2.48.1
Re: [PATCH RFT 1/3] dt-bindings: usb: qcom,dwc3: Allow high-speed interrupt on Glymur, Hamoa and Milos
Posted by Rob Herring (Arm) 3 weeks, 4 days ago
On Tue, 13 Jan 2026 14:33:04 +0200, Abel Vesa wrote:
> Some of the controllers found of these platforms can be tied up to a
> single high-speed PHY, basically rendering them as USB 2.0 controllers.
> So in this case, the interrupt to the Synopsys DesignWare Core is coming
> from the high-speed PHY, so allow the interrupt to reflect that.
> 
> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> ---
>  Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>
Re: [PATCH RFT 1/3] dt-bindings: usb: qcom,dwc3: Allow high-speed interrupt on Glymur, Hamoa and Milos
Posted by Konrad Dybcio 3 weeks, 6 days ago
On 1/13/26 1:33 PM, Abel Vesa wrote:
> Some of the controllers found of these platforms can be tied up to a
> single high-speed PHY, basically rendering them as USB 2.0 controllers.
> So in this case, the interrupt to the Synopsys DesignWare Core is coming
> from the high-speed PHY, so allow the interrupt to reflect that.
> 
> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> ---
>  Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
> index 7d784a648b7d..f879e2e104c4 100644
> --- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
> +++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
> @@ -500,7 +500,7 @@ allOf:
>              - const: pwr_event
>              - const: dp_hs_phy_irq
>              - const: dm_hs_phy_irq
> -            - const: ss_phy_irq
> +            - enum: [hs_phy_irq, ss_phy_irq]

I fear git may mis-merge this.. if you send a v2, please tweak the config
to add more context

Konrad