[v2] drm/amd/display: Initialise backlight level values from hw

[PATCH v2] drm/amd/display: Initialise backlight level values from hw

Posted by Vivek Das Mohapatra 3 weeks, 5 days ago

Internal backlight levels are initialised from ACPI but the values
are sometimes out of sync with the levels in effect until there has
been a read from hardware (eg triggered by reading from sysfs).

This means that the first drm_commit can cause the levels to be set
to a different value than the actual starting one, which results in
a sudden change in brightness.

This path shows the problem (when the values are out of sync):

   amdgpu_dm_atomic_commit_tail()
   -> amdgpu_dm_commit_streams()
   -> amdgpu_dm_backlight_set_level(..., dm->brightness[n])

This patch calls the backlight ops get_brightness explicitly
at the end of backlight registration to make sure dm->brightness[n]
is in sync with the actual hardware levels.

Signed-off-by: Vivek Das Mohapatra <vivek@collabora.com>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 354e359c4507..9e8cbfeee915 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -5258,6 +5258,8 @@ amdgpu_dm_register_backlight_device(struct amdgpu_dm_connector *aconnector)
 	struct amdgpu_dm_backlight_caps *caps;
 	char bl_name[16];
 	int min, max;
+	int real_brightness;
+	int init_brightness;
 
 	if (aconnector->bl_idx == -1)
 		return;
@@ -5282,6 +5284,8 @@ amdgpu_dm_register_backlight_device(struct amdgpu_dm_connector *aconnector)
 	} else
 		props.brightness = props.max_brightness = MAX_BACKLIGHT_LEVEL;
 
+	init_brightness = props.brightness;
+
 	if (caps->data_points && !(amdgpu_dc_debug_mask & DC_DISABLE_CUSTOM_BRIGHTNESS_CURVE)) {
 		drm_info(drm, "Using custom brightness curve\n");
 		props.scale = BACKLIGHT_SCALE_NON_LINEAR;
@@ -5300,8 +5304,20 @@ amdgpu_dm_register_backlight_device(struct amdgpu_dm_connector *aconnector)
 	if (IS_ERR(dm->backlight_dev[aconnector->bl_idx])) {
 		drm_err(drm, "DM: Backlight registration failed!\n");
 		dm->backlight_dev[aconnector->bl_idx] = NULL;
-	} else
+	} else {
+		/*
+		 * dm->brightness[x] can be inconsistent just after startup until
+		 * ops.get_brightness is called.
+		 */
+		real_brightness =
+			amdgpu_dm_backlight_ops.get_brightness(dm->backlight_dev[aconnector->bl_idx]);
+
+		if (real_brightness != init_brightness) {
+			dm->actual_brightness[aconnector->bl_idx] = real_brightness;
+			dm->brightness[aconnector->bl_idx] = real_brightness;
+		}
 		drm_dbg_driver(drm, "DM: Registered Backlight device: %s\n", bl_name);
+	}
 }
 
 static int initialize_plane(struct amdgpu_display_manager *dm,
-- 
2.39.5

Re: [PATCH v2] drm/amd/display: Initialise backlight level values from hw

Posted by Mario Limonciello 3 weeks, 5 days ago

On 1/12/26 9:28 AM, Vivek Das Mohapatra wrote:
> Internal backlight levels are initialised from ACPI but the values
> are sometimes out of sync with the levels in effect until there has
> been a read from hardware (eg triggered by reading from sysfs).
> 
> This means that the first drm_commit can cause the levels to be set
> to a different value than the actual starting one, which results in
> a sudden change in brightness.
> 
> This path shows the problem (when the values are out of sync):
> 
>     amdgpu_dm_atomic_commit_tail()
>     -> amdgpu_dm_commit_streams()
>     -> amdgpu_dm_backlight_set_level(..., dm->brightness[n])
> 
> This patch calls the backlight ops get_brightness explicitly
> at the end of backlight registration to make sure dm->brightness[n]
> is in sync with the actual hardware levels.
> 
> Signed-off-by: Vivek Das Mohapatra <vivek@collabora.com>

Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>

> ---
>   .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  | 18 +++++++++++++++++-
>   1 file changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index 354e359c4507..9e8cbfeee915 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -5258,6 +5258,8 @@ amdgpu_dm_register_backlight_device(struct amdgpu_dm_connector *aconnector)
>   	struct amdgpu_dm_backlight_caps *caps;
>   	char bl_name[16];
>   	int min, max;
> +	int real_brightness;
> +	int init_brightness;
>   
>   	if (aconnector->bl_idx == -1)
>   		return;
> @@ -5282,6 +5284,8 @@ amdgpu_dm_register_backlight_device(struct amdgpu_dm_connector *aconnector)
>   	} else
>   		props.brightness = props.max_brightness = MAX_BACKLIGHT_LEVEL;
>   
> +	init_brightness = props.brightness;
> +
>   	if (caps->data_points && !(amdgpu_dc_debug_mask & DC_DISABLE_CUSTOM_BRIGHTNESS_CURVE)) {
>   		drm_info(drm, "Using custom brightness curve\n");
>   		props.scale = BACKLIGHT_SCALE_NON_LINEAR;
> @@ -5300,8 +5304,20 @@ amdgpu_dm_register_backlight_device(struct amdgpu_dm_connector *aconnector)
>   	if (IS_ERR(dm->backlight_dev[aconnector->bl_idx])) {
>   		drm_err(drm, "DM: Backlight registration failed!\n");
>   		dm->backlight_dev[aconnector->bl_idx] = NULL;
> -	} else
> +	} else {
> +		/*
> +		 * dm->brightness[x] can be inconsistent just after startup until
> +		 * ops.get_brightness is called.
> +		 */
> +		real_brightness =
> +			amdgpu_dm_backlight_ops.get_brightness(dm->backlight_dev[aconnector->bl_idx]);
> +
> +		if (real_brightness != init_brightness) {
> +			dm->actual_brightness[aconnector->bl_idx] = real_brightness;
> +			dm->brightness[aconnector->bl_idx] = real_brightness;
> +		}
>   		drm_dbg_driver(drm, "DM: Registered Backlight device: %s\n", bl_name);
> +	}
>   }
>   
>   static int initialize_plane(struct amdgpu_display_manager *dm,