On Mon, 12 Jan 2026 11:45:22 -0600
David Lechner <dlechner@baylibre.com> wrote:
> Add a new multi_lane_mode field to struct spi_transfer to allow
> peripherals that support multiple SPI lanes to be used with a single
> SPI controller.
>
> This requires both the peripheral and the controller to have multiple
> serializers connected to separate data lanes. It could also be used with
> a single controller and multiple peripherals that are functioning as a
> single logical device (similar to parallel memories).
>
> Acked-by: Nuno Sá <nuno.sa@analog.com>
> Acked-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
> Signed-off-by: David Lechner <dlechner@baylibre.com>
Fwiw looks fine to me (and so a tag mostly so I don't read it again in v6
if that happens!)
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> ---
>
> v4 changes:
> * Shortened commit message (useful info will be in docs instead).
> * Added whitespace to create clear grouping of macros and the field.
>
> v3 changes:
> * Renamed "buses" to "lanes" to reflect devicetree property name change.
> ---
> include/linux/spi/spi.h | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
> index 7aff60ab257e..eba7ae8466ac 100644
> --- a/include/linux/spi/spi.h
> +++ b/include/linux/spi/spi.h
> @@ -981,6 +981,8 @@ struct spi_res {
> * (SPI_NBITS_SINGLE) is used.
> * @rx_nbits: number of bits used for reading. If 0 the default
> * (SPI_NBITS_SINGLE) is used.
> + * @multi_lane_mode: How to serialize data on multiple lanes. One of the
> + * SPI_MULTI_LANE_MODE_* values.
> * @len: size of rx and tx buffers (in bytes)
> * @speed_hz: Select a speed other than the device default for this
> * transfer. If 0 the default (from @spi_device) is used.
> @@ -1117,6 +1119,12 @@ struct spi_transfer {
> unsigned cs_change:1;
> unsigned tx_nbits:4;
> unsigned rx_nbits:4;
> +
> +#define SPI_MULTI_LANE_MODE_SINGLE 0 /* only use single lane */
> +#define SPI_MULTI_LANE_MODE_STRIPE 1 /* one data word per lane */
> +#define SPI_MULTI_LANE_MODE_MIRROR 2 /* same word sent on all lanes */
> + unsigned multi_lane_mode: 2;
> +
> unsigned timestamped:1;
> bool dtr_mode;
> #define SPI_NBITS_SINGLE 0x01 /* 1-bit transfer */
>