[PATCH v2 0/1] drm/bridge: lontium-lt9611uxc: use irq as optional

Vladimir Yakovlev posted 1 patch 1 month ago
Only 0 patches received!
drivers/gpu/drm/bridge/lontium-lt9611uxc.c | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
[PATCH v2 0/1] drm/bridge: lontium-lt9611uxc: use irq as optional
Posted by Vladimir Yakovlev 1 month ago
Hello!

This patch add support IRQ as optional for lt9611uxc

Changes in v2:
- As Luca Ceresoli recommended earlier, I added a patch to replace
- request_threaded_irq with devm_request_threaded_irq before making
- these changes.
-
- Since the updates only affected this patch, and the previous patch
- was new, I made v2 just for this one. I apologize if this is incorrect.


Thanks

Vladimir Yakovlev (1):
  drm/bridge: lontium-lt9611uxc: use irq as optional parameter

 drivers/gpu/drm/bridge/lontium-lt9611uxc.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

-- 
2.34.1
Re: [PATCH v2 0/1] drm/bridge: lontium-lt9611uxc: use irq as optional
Posted by Luca Ceresoli 1 month ago
On Wed Jan 7, 2026 at 4:23 AM CET, Vladimir Yakovlev wrote:
> Hello!
>
> This patch add support IRQ as optional for lt9611uxc
>
> Changes in v2:
> - As Luca Ceresoli recommended earlier, I added a patch to replace
> - request_threaded_irq with devm_request_threaded_irq before making
> - these changes.
> -
> - Since the updates only affected this patch, and the previous patch
> - was new, I made v2 just for this one. I apologize if this is incorrect.

This series depends on "[PATCH] drm/bridge: lontium-lt9611uxc: change to
use devm_request_threaded_irq" which you have sent separately, so it cannot
be applied as-is. The best thing to do would have been sending a v2 series
with 2 patches: first the devm conversion, then this one.

However no need to send again just for this, it can be handled while
applying.

Luca

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com