1. Patchew
  2. linux
  3. View series

[PATCH v2] drm/rcar-du: dsi: Clean up VCLK divider calculation

Marek Vasut posted 1 patch 1 month ago 
.../gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c   | 35 ++++++++++++++-----
1 file changed, 26 insertions(+), 9 deletions(-)
[PATCH v2] drm/rcar-du: dsi: Clean up VCLK divider calculation
Posted by Marek Vasut 1 month ago 
Currently, in rcar_mipi_dsi_parameters_calc(), the VCLK divider is stored
in setup_info structure as BIT(divider). The rcar_mipi_dsi_parameters_calc()
is called at the early beginning of rcar_mipi_dsi_startup() function. Later,
in the same rcar_mipi_dsi_startup() function, the stored BIT(divider) value
is passed to __ffs() to calculate back the divider out of the value again.

Factor out VCLK divider calculation into rcar_mipi_dsi_vclk_divider()
function and call the function from both rcar_mipi_dsi_parameters_calc()
and rcar_mipi_dsi_startup() to avoid this back and forth BIT() and _ffs()
and avoid unnecessarily storing the divider value in setup_info at all.

This rework has a slight side-effect, in that it should allow the compiler
to better evaluate the code and avoid compiler warnings about variable
value overflows, which can never happen.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512051834.bESvhDiG-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202512222321.TeY4VbvK-lkp@intel.com/
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
---
Cc: David Airlie <airlied@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Use BIT_U16()
---
 .../gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c   | 35 ++++++++++++++-----
 1 file changed, 26 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c
index 4ef2e3c129ed7..508977b9e8926 100644
--- a/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c
@@ -84,7 +84,6 @@ struct dsi_setup_info {
 	unsigned long fout;
 	u16 m;
 	u16 n;
-	u16 vclk_divider;
 	const struct dsi_clk_config *clkset;
 };
 
@@ -335,10 +334,24 @@ rcar_mipi_dsi_post_init_phtw_v4h(struct rcar_mipi_dsi *dsi,
  * Hardware Setup
  */
 
+static unsigned int rcar_mipi_dsi_vclk_divider(struct rcar_mipi_dsi *dsi,
+					       struct dsi_setup_info *setup_info)
+{
+	switch (dsi->info->model) {
+	case RCAR_DSI_V3U:
+	default:
+		return (setup_info->clkset->vco_cntrl >> 4) & 0x3;
+
+	case RCAR_DSI_V4H:
+		return (setup_info->clkset->vco_cntrl >> 3) & 0x7;
+	}
+}
+
 static void rcar_mipi_dsi_pll_calc(struct rcar_mipi_dsi *dsi,
 				   unsigned long fin_rate,
 				   unsigned long fout_target,
-				   struct dsi_setup_info *setup_info)
+				   struct dsi_setup_info *setup_info,
+				   u16 vclk_divider)
 {
 	unsigned int best_err = -1;
 	const struct rcar_mipi_dsi_device_info *info = dsi->info;
@@ -360,7 +373,7 @@ static void rcar_mipi_dsi_pll_calc(struct rcar_mipi_dsi *dsi,
 			if (fout < info->fout_min || fout > info->fout_max)
 				continue;
 
-			fout = div64_u64(fout, setup_info->vclk_divider);
+			fout = div64_u64(fout, vclk_divider);
 
 			if (fout < setup_info->clkset->min_freq ||
 			    fout > setup_info->clkset->max_freq)
@@ -390,7 +403,9 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
 	unsigned long fout_target;
 	unsigned long fin_rate;
 	unsigned int i;
+	unsigned int div;
 	unsigned int err;
+	u16 vclk_divider;
 
 	/*
 	 * Calculate Fout = dot clock * ColorDepth / (2 * Lane Count)
@@ -412,18 +427,20 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
 
 	fin_rate = clk_get_rate(clk);
 
+	div = rcar_mipi_dsi_vclk_divider(dsi, setup_info);
+
 	switch (dsi->info->model) {
 	case RCAR_DSI_V3U:
 	default:
-		setup_info->vclk_divider = 1 << ((clk_cfg->vco_cntrl >> 4) & 0x3);
+		vclk_divider = BIT_U16(div);
 		break;
 
 	case RCAR_DSI_V4H:
-		setup_info->vclk_divider = 1 << (((clk_cfg->vco_cntrl >> 3) & 0x7) + 1);
+		vclk_divider = BIT_U16(div + 1);
 		break;
 	}
 
-	rcar_mipi_dsi_pll_calc(dsi, fin_rate, fout_target, setup_info);
+	rcar_mipi_dsi_pll_calc(dsi, fin_rate, fout_target, setup_info, vclk_divider);
 
 	/* Find hsfreqrange */
 	setup_info->hsfreq = setup_info->fout * 2;
@@ -439,7 +456,7 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
 	dev_dbg(dsi->dev,
 		"Fout = %u * %lu / (%u * %u * %u) = %lu (target %lu Hz, error %d.%02u%%)\n",
 		setup_info->m, fin_rate, dsi->info->n_mul, setup_info->n,
-		setup_info->vclk_divider, setup_info->fout, fout_target,
+		vclk_divider, setup_info->fout, fout_target,
 		err / 100, err % 100);
 
 	dev_dbg(dsi->dev,
@@ -653,11 +670,11 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
 	switch (dsi->info->model) {
 	case RCAR_DSI_V3U:
 	default:
-		vclkset |= VCLKSET_DIV_V3U(__ffs(setup_info.vclk_divider));
+		vclkset |= VCLKSET_DIV_V3U(rcar_mipi_dsi_vclk_divider(dsi, &setup_info));
 		break;
 
 	case RCAR_DSI_V4H:
-		vclkset |= VCLKSET_DIV_V4H(__ffs(setup_info.vclk_divider) - 1);
+		vclkset |= VCLKSET_DIV_V4H(rcar_mipi_dsi_vclk_divider(dsi, &setup_info));
 		break;
 	}
 
-- 
2.51.0
Re: [PATCH v2] drm/rcar-du: dsi: Clean up VCLK divider calculation
Posted by Tomi Valkeinen 1 week, 3 days ago 
Hi,

On 05/01/2026 19:52, Marek Vasut wrote:
> Currently, in rcar_mipi_dsi_parameters_calc(), the VCLK divider is stored
> in setup_info structure as BIT(divider). The rcar_mipi_dsi_parameters_calc()
> is called at the early beginning of rcar_mipi_dsi_startup() function. Later,
> in the same rcar_mipi_dsi_startup() function, the stored BIT(divider) value
> is passed to __ffs() to calculate back the divider out of the value again.
> 
> Factor out VCLK divider calculation into rcar_mipi_dsi_vclk_divider()
> function and call the function from both rcar_mipi_dsi_parameters_calc()
> and rcar_mipi_dsi_startup() to avoid this back and forth BIT() and _ffs()
> and avoid unnecessarily storing the divider value in setup_info at all.
> 
> This rework has a slight side-effect, in that it should allow the compiler
> to better evaluate the code and avoid compiler warnings about variable
> value overflows, which can never happen.
> 
> Reported-by: kernel test robot <lkp@intel.com>
> Closes: https://lore.kernel.org/oe-kbuild-all/202512051834.bESvhDiG-lkp@intel.com/
> Closes: https://lore.kernel.org/oe-kbuild-all/202512222321.TeY4VbvK-lkp@intel.com/
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
> ---

Thanks, pushed to drm-misc-next.

 Tomi

> Cc: David Airlie <airlied@gmail.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Magnus Damm <magnus.damm@gmail.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Simona Vetter <simona@ffwll.ch>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-renesas-soc@vger.kernel.org
> ---
> V2: Use BIT_U16()
> ---
>  .../gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c   | 35 ++++++++++++++-----
>  1 file changed, 26 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c
> index 4ef2e3c129ed7..508977b9e8926 100644
> --- a/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c
> +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c
> @@ -84,7 +84,6 @@ struct dsi_setup_info {
>  	unsigned long fout;
>  	u16 m;
>  	u16 n;
> -	u16 vclk_divider;
>  	const struct dsi_clk_config *clkset;
>  };
>  
> @@ -335,10 +334,24 @@ rcar_mipi_dsi_post_init_phtw_v4h(struct rcar_mipi_dsi *dsi,
>   * Hardware Setup
>   */
>  
> +static unsigned int rcar_mipi_dsi_vclk_divider(struct rcar_mipi_dsi *dsi,
> +					       struct dsi_setup_info *setup_info)
> +{
> +	switch (dsi->info->model) {
> +	case RCAR_DSI_V3U:
> +	default:
> +		return (setup_info->clkset->vco_cntrl >> 4) & 0x3;
> +
> +	case RCAR_DSI_V4H:
> +		return (setup_info->clkset->vco_cntrl >> 3) & 0x7;
> +	}
> +}
> +
>  static void rcar_mipi_dsi_pll_calc(struct rcar_mipi_dsi *dsi,
>  				   unsigned long fin_rate,
>  				   unsigned long fout_target,
> -				   struct dsi_setup_info *setup_info)
> +				   struct dsi_setup_info *setup_info,
> +				   u16 vclk_divider)
>  {
>  	unsigned int best_err = -1;
>  	const struct rcar_mipi_dsi_device_info *info = dsi->info;
> @@ -360,7 +373,7 @@ static void rcar_mipi_dsi_pll_calc(struct rcar_mipi_dsi *dsi,
>  			if (fout < info->fout_min || fout > info->fout_max)
>  				continue;
>  
> -			fout = div64_u64(fout, setup_info->vclk_divider);
> +			fout = div64_u64(fout, vclk_divider);
>  
>  			if (fout < setup_info->clkset->min_freq ||
>  			    fout > setup_info->clkset->max_freq)
> @@ -390,7 +403,9 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
>  	unsigned long fout_target;
>  	unsigned long fin_rate;
>  	unsigned int i;
> +	unsigned int div;
>  	unsigned int err;
> +	u16 vclk_divider;
>  
>  	/*
>  	 * Calculate Fout = dot clock * ColorDepth / (2 * Lane Count)
> @@ -412,18 +427,20 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
>  
>  	fin_rate = clk_get_rate(clk);
>  
> +	div = rcar_mipi_dsi_vclk_divider(dsi, setup_info);
> +
>  	switch (dsi->info->model) {
>  	case RCAR_DSI_V3U:
>  	default:
> -		setup_info->vclk_divider = 1 << ((clk_cfg->vco_cntrl >> 4) & 0x3);
> +		vclk_divider = BIT_U16(div);
>  		break;
>  
>  	case RCAR_DSI_V4H:
> -		setup_info->vclk_divider = 1 << (((clk_cfg->vco_cntrl >> 3) & 0x7) + 1);
> +		vclk_divider = BIT_U16(div + 1);
>  		break;
>  	}
>  
> -	rcar_mipi_dsi_pll_calc(dsi, fin_rate, fout_target, setup_info);
> +	rcar_mipi_dsi_pll_calc(dsi, fin_rate, fout_target, setup_info, vclk_divider);
>  
>  	/* Find hsfreqrange */
>  	setup_info->hsfreq = setup_info->fout * 2;
> @@ -439,7 +456,7 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
>  	dev_dbg(dsi->dev,
>  		"Fout = %u * %lu / (%u * %u * %u) = %lu (target %lu Hz, error %d.%02u%%)\n",
>  		setup_info->m, fin_rate, dsi->info->n_mul, setup_info->n,
> -		setup_info->vclk_divider, setup_info->fout, fout_target,
> +		vclk_divider, setup_info->fout, fout_target,
>  		err / 100, err % 100);
>  
>  	dev_dbg(dsi->dev,
> @@ -653,11 +670,11 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
>  	switch (dsi->info->model) {
>  	case RCAR_DSI_V3U:
>  	default:
> -		vclkset |= VCLKSET_DIV_V3U(__ffs(setup_info.vclk_divider));
> +		vclkset |= VCLKSET_DIV_V3U(rcar_mipi_dsi_vclk_divider(dsi, &setup_info));
>  		break;
>  
>  	case RCAR_DSI_V4H:
> -		vclkset |= VCLKSET_DIV_V4H(__ffs(setup_info.vclk_divider) - 1);
> +		vclkset |= VCLKSET_DIV_V4H(rcar_mipi_dsi_vclk_divider(dsi, &setup_info));
>  		break;
>  	}
>
Re: [PATCH v2] drm/rcar-du: dsi: Clean up VCLK divider calculation
Posted by Laurent Pinchart 2 weeks ago 
Hi Marek,

Thank you for the patch.

On Mon, Jan 05, 2026 at 06:52:04PM +0100, Marek Vasut wrote:
> Currently, in rcar_mipi_dsi_parameters_calc(), the VCLK divider is stored
> in setup_info structure as BIT(divider). The rcar_mipi_dsi_parameters_calc()
> is called at the early beginning of rcar_mipi_dsi_startup() function. Later,
> in the same rcar_mipi_dsi_startup() function, the stored BIT(divider) value
> is passed to __ffs() to calculate back the divider out of the value again.
> 
> Factor out VCLK divider calculation into rcar_mipi_dsi_vclk_divider()
> function and call the function from both rcar_mipi_dsi_parameters_calc()
> and rcar_mipi_dsi_startup() to avoid this back and forth BIT() and _ffs()
> and avoid unnecessarily storing the divider value in setup_info at all.
> 
> This rework has a slight side-effect, in that it should allow the compiler
> to better evaluate the code and avoid compiler warnings about variable
> value overflows, which can never happen.
> 
> Reported-by: kernel test robot <lkp@intel.com>
> Closes: https://lore.kernel.org/oe-kbuild-all/202512051834.bESvhDiG-lkp@intel.com/
> Closes: https://lore.kernel.org/oe-kbuild-all/202512222321.TeY4VbvK-lkp@intel.com/
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Tomi, could you please push this to drm-misc ?

> ---
> Cc: David Airlie <airlied@gmail.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Magnus Damm <magnus.damm@gmail.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Simona Vetter <simona@ffwll.ch>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-renesas-soc@vger.kernel.org
> ---
> V2: Use BIT_U16()
> ---
>  .../gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c   | 35 ++++++++++++++-----
>  1 file changed, 26 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c
> index 4ef2e3c129ed7..508977b9e8926 100644
> --- a/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c
> +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c
> @@ -84,7 +84,6 @@ struct dsi_setup_info {
>  	unsigned long fout;
>  	u16 m;
>  	u16 n;
> -	u16 vclk_divider;
>  	const struct dsi_clk_config *clkset;
>  };
>  
> @@ -335,10 +334,24 @@ rcar_mipi_dsi_post_init_phtw_v4h(struct rcar_mipi_dsi *dsi,
>   * Hardware Setup
>   */
>  
> +static unsigned int rcar_mipi_dsi_vclk_divider(struct rcar_mipi_dsi *dsi,
> +					       struct dsi_setup_info *setup_info)
> +{
> +	switch (dsi->info->model) {
> +	case RCAR_DSI_V3U:
> +	default:
> +		return (setup_info->clkset->vco_cntrl >> 4) & 0x3;
> +
> +	case RCAR_DSI_V4H:
> +		return (setup_info->clkset->vco_cntrl >> 3) & 0x7;
> +	}
> +}
> +
>  static void rcar_mipi_dsi_pll_calc(struct rcar_mipi_dsi *dsi,
>  				   unsigned long fin_rate,
>  				   unsigned long fout_target,
> -				   struct dsi_setup_info *setup_info)
> +				   struct dsi_setup_info *setup_info,
> +				   u16 vclk_divider)
>  {
>  	unsigned int best_err = -1;
>  	const struct rcar_mipi_dsi_device_info *info = dsi->info;
> @@ -360,7 +373,7 @@ static void rcar_mipi_dsi_pll_calc(struct rcar_mipi_dsi *dsi,
>  			if (fout < info->fout_min || fout > info->fout_max)
>  				continue;
>  
> -			fout = div64_u64(fout, setup_info->vclk_divider);
> +			fout = div64_u64(fout, vclk_divider);
>  
>  			if (fout < setup_info->clkset->min_freq ||
>  			    fout > setup_info->clkset->max_freq)
> @@ -390,7 +403,9 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
>  	unsigned long fout_target;
>  	unsigned long fin_rate;
>  	unsigned int i;
> +	unsigned int div;
>  	unsigned int err;
> +	u16 vclk_divider;
>  
>  	/*
>  	 * Calculate Fout = dot clock * ColorDepth / (2 * Lane Count)
> @@ -412,18 +427,20 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
>  
>  	fin_rate = clk_get_rate(clk);
>  
> +	div = rcar_mipi_dsi_vclk_divider(dsi, setup_info);
> +
>  	switch (dsi->info->model) {
>  	case RCAR_DSI_V3U:
>  	default:
> -		setup_info->vclk_divider = 1 << ((clk_cfg->vco_cntrl >> 4) & 0x3);
> +		vclk_divider = BIT_U16(div);
>  		break;
>  
>  	case RCAR_DSI_V4H:
> -		setup_info->vclk_divider = 1 << (((clk_cfg->vco_cntrl >> 3) & 0x7) + 1);
> +		vclk_divider = BIT_U16(div + 1);
>  		break;
>  	}
>  
> -	rcar_mipi_dsi_pll_calc(dsi, fin_rate, fout_target, setup_info);
> +	rcar_mipi_dsi_pll_calc(dsi, fin_rate, fout_target, setup_info, vclk_divider);
>  
>  	/* Find hsfreqrange */
>  	setup_info->hsfreq = setup_info->fout * 2;
> @@ -439,7 +456,7 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
>  	dev_dbg(dsi->dev,
>  		"Fout = %u * %lu / (%u * %u * %u) = %lu (target %lu Hz, error %d.%02u%%)\n",
>  		setup_info->m, fin_rate, dsi->info->n_mul, setup_info->n,
> -		setup_info->vclk_divider, setup_info->fout, fout_target,
> +		vclk_divider, setup_info->fout, fout_target,
>  		err / 100, err % 100);
>  
>  	dev_dbg(dsi->dev,
> @@ -653,11 +670,11 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
>  	switch (dsi->info->model) {
>  	case RCAR_DSI_V3U:
>  	default:
> -		vclkset |= VCLKSET_DIV_V3U(__ffs(setup_info.vclk_divider));
> +		vclkset |= VCLKSET_DIV_V3U(rcar_mipi_dsi_vclk_divider(dsi, &setup_info));
>  		break;
>  
>  	case RCAR_DSI_V4H:
> -		vclkset |= VCLKSET_DIV_V4H(__ffs(setup_info.vclk_divider) - 1);
> +		vclkset |= VCLKSET_DIV_V4H(rcar_mipi_dsi_vclk_divider(dsi, &setup_info));
>  		break;
>  	}
>  

-- 
Regards,

Laurent Pinchart

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.