Use clamp() to simplify bcm2835_thermal_temp2adc() and improve its
readability. Explicitly cast BIT() to int to prevent a signedness error.

Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
---
 drivers/thermal/broadcom/bcm2835_thermal.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index 685a5aee5e0d..c5105dfc6ec9 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -11,6 +11,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/minmax.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -80,12 +81,7 @@ static int bcm2835_thermal_temp2adc(int temp, int offset, int slope)
 	temp -= offset;
 	temp /= slope;
 
-	if (temp < 0)
-		temp = 0;
-	if (temp >= BIT(BCM2835_TS_TSENSSTAT_DATA_BITS))
-		temp = BIT(BCM2835_TS_TSENSSTAT_DATA_BITS) - 1;
-
-	return temp;
+	return clamp(temp, 0, (int)BIT(BCM2835_TS_TSENSSTAT_DATA_BITS) - 1);
 }
 
 static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz, int *temp)

On 1/5/26 13:13, Thorsten Blum wrote:
> Use clamp() to simplify bcm2835_thermal_temp2adc() and improve its
> readability. Explicitly cast BIT() to int to prevent a signedness error.
> 
> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
> ---
>   drivers/thermal/broadcom/bcm2835_thermal.c | 8 ++------
>   1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
> index 685a5aee5e0d..c5105dfc6ec9 100644
> --- a/drivers/thermal/broadcom/bcm2835_thermal.c

Applied, thanks

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

On Mon,  5 Jan 2026 13:13:03 +0100
Thorsten Blum <thorsten.blum@linux.dev> wrote:

> Use clamp() to simplify bcm2835_thermal_temp2adc() and improve its
> readability. Explicitly cast BIT() to int to prevent a signedness error.
> 
> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
> ---
>  drivers/thermal/broadcom/bcm2835_thermal.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
> index 685a5aee5e0d..c5105dfc6ec9 100644
> --- a/drivers/thermal/broadcom/bcm2835_thermal.c
> +++ b/drivers/thermal/broadcom/bcm2835_thermal.c
> @@ -11,6 +11,7 @@
>  #include <linux/err.h>
>  #include <linux/io.h>
>  #include <linux/kernel.h>
> +#include <linux/minmax.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_address.h>
> @@ -80,12 +81,7 @@ static int bcm2835_thermal_temp2adc(int temp, int offset, int slope)
>  	temp -= offset;
>  	temp /= slope;
>  
> -	if (temp < 0)
> -		temp = 0;
> -	if (temp >= BIT(BCM2835_TS_TSENSSTAT_DATA_BITS))
> -		temp = BIT(BCM2835_TS_TSENSSTAT_DATA_BITS) - 1;
> -
> -	return temp;
> +	return clamp(temp, 0, (int)BIT(BCM2835_TS_TSENSSTAT_DATA_BITS) - 1);

Hmmm....
I wonder if I can get 'statically_true(lo >= 0)' into the type check so that
cast isn't necessary.
	signed_val < 0 ? 0 : signed_val > unsigned_val ? unsigned_val : signed_val
is fine.
Would mean swapping the order of the tests - which shouldn't break anything.
But will need a full audit - various bits of code have relied on the order
of the comparisons.

	David

>  }
>  
>  static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
>

On Mon Jan 5, 2026 at 1:13 PM CET, Thorsten Blum wrote:
> Use clamp() to simplify bcm2835_thermal_temp2adc() and improve its
> readability. Explicitly cast BIT() to int to prevent a signedness error.
>
> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com