Currently, GPIOs claimed by this driver for external rail control
all show up with "s2mps11-regulator" as consumer, which is not
very informative.
Switch to using the regulator name via desc->name instead, using the
device name as fallback.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
drivers/regulator/s2mps11.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 4a9d70947f17cb7520e0e820d3d1b9eb370ff600..2d5510acd0780ab6f9296c48ddcde5efe15ff488 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -362,7 +362,8 @@ static int s2mps11_of_parse_gpiod(struct device_node *np,
ena_gpiod = fwnode_gpiod_get_index(of_fwnode_handle(np), con_id, 0,
GPIOD_OUT_HIGH |
GPIOD_FLAGS_BIT_NONEXCLUSIVE,
- "s2mps11-regulator");
+ desc->name
+ ? : dev_name(config->dev));
if (IS_ERR(ena_gpiod)) {
ret = PTR_ERR(ena_gpiod);
--
2.52.0.351.gbe84eed79e-goog