Add UART13, typically used for Bluetooth connection on SM8150.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index e3ec99972a28..24c1691642c8 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1693,6 +1693,15 @@ spi13: spi@c8c000 {
 				status = "disabled";
 			};
 
+			uart13: serial@c8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			i2c14: i2c@c90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00c90000 0 0x4000>;

-- 
2.47.3

On 12/31/25 12:35 AM, Dmitry Baryshkov wrote:
> Add UART13, typically used for Bluetooth connection on SM8150.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad