The GENI SE protocol drivers (I2C, SPI, UART) implement similar resource
activation/deactivation sequences independently, leading to code
duplication.

Introduce geni_se_resources_activate()/geni_se_resources_deactivate() to
power on/off resources.The activate function enables ICC, clocks, and TLMM
whereas the deactivate function disables resources in reverse order
including OPP rate reset, clocks, ICC and TLMM.

Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
---
v1 -> v2
Bjorn
- Updated commit message based code changes.
- Removed geni_se_resource_state() API.
- Utilized code snippet from geni_se_resources_off()
---
 drivers/soc/qcom/qcom-geni-se.c  | 77 ++++++++++++++++++++++++++++++++
 include/linux/soc/qcom/geni-se.h |  4 ++
 2 files changed, 81 insertions(+)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 75e722cd1a94..fbffbc9ea7a6 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -1013,6 +1013,83 @@ int geni_icc_disable(struct geni_se *se)
 }
 EXPORT_SYMBOL_GPL(geni_icc_disable);
 
+/**
+ * geni_se_resources_deactivate() - Deactivate GENI SE device resources
+ * @se: Pointer to the geni_se structure
+ *
+ * Deactivates device resources for power saving: OPP rate to 0, pin control
+ * to sleep state, turns off clocks, and disables interconnect. Skips ACPI devices.
+ *
+ * Return: 0 on success, negative error code on failure
+ */
+int geni_se_resources_deactivate(struct geni_se *se)
+{
+	int ret;
+
+	if (has_acpi_companion(se->dev))
+		return 0;
+
+	if (se->has_opp)
+		dev_pm_opp_set_rate(se->dev, 0);
+
+	ret = pinctrl_pm_select_sleep_state(se->dev);
+	if (ret)
+		return ret;
+
+	geni_se_clks_off(se);
+
+	if (se->core_clk)
+		clk_disable_unprepare(se->core_clk);
+
+	return geni_icc_disable(se);
+}
+
+/**
+ * geni_se_resources_activate() - Activate GENI SE device resources
+ * @se: Pointer to the geni_se structure
+ *
+ * Activates device resources for operation: enables interconnect, prepares clocks,
+ * and sets pin control to default state. Includes error cleanup. Skips ACPI devices.
+ *
+ * Return: 0 on success, negative error code on failure
+ */
+int geni_se_resources_activate(struct geni_se *se)
+{
+	int ret;
+
+	if (has_acpi_companion(se->dev))
+		return 0;
+
+	ret = geni_icc_enable(se);
+	if (ret)
+		return ret;
+
+	if (se->core_clk) {
+		ret = clk_prepare_enable(se->core_clk);
+		if (ret)
+			goto out_icc_disable;
+	}
+
+	ret = geni_se_clks_on(se);
+	if (ret)
+		goto out_clk_disable;
+
+	ret = pinctrl_pm_select_default_state(se->dev);
+	if (ret) {
+		geni_se_clks_off(se);
+		goto out_clk_disable;
+	}
+
+	return ret;
+
+out_clk_disable:
+	if (se->core_clk)
+		clk_disable_unprepare(se->core_clk);
+out_icc_disable:
+	geni_icc_disable(se);
+	return ret;
+}
+
 /**
  * geni_se_resources_init() - Initialize resources for a GENI SE device.
  * @se: Pointer to the geni_se structure representing the GENI SE device.
diff --git a/include/linux/soc/qcom/geni-se.h b/include/linux/soc/qcom/geni-se.h
index c182dd0f0bde..36a68149345c 100644
--- a/include/linux/soc/qcom/geni-se.h
+++ b/include/linux/soc/qcom/geni-se.h
@@ -541,6 +541,10 @@ int geni_icc_disable(struct geni_se *se);
 
 int geni_se_resources_init(struct geni_se *se);
 
+int geni_se_resources_activate(struct geni_se *se);
+
+int geni_se_resources_deactivate(struct geni_se *se);
+
 int geni_load_se_firmware(struct geni_se *se, enum geni_se_protocol_type protocol);
 #endif
 #endif
-- 
2.34.1