From: Abel Vesa <abel.vesa@linaro.org>
On X Elite platform, the eDP PHY uses one more clock called ref.
The current X Elite devices supported upstream work fine without this
clock, because the boot firmware leaves this clock enabled. But we should
not rely on that. Also, even though this change breaks the ABI, it is
needed in order to make the driver disables this clock along with the
other ones, for a proper bring-down of the entire PHY.
So attach the this ref clock to the PHY.
Cc: stable@vger.kernel.org # v6.10
Fixes: 5d5607861350 ("dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
.../devicetree/bindings/phy/qcom,edp-phy.yaml | 28 +++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
index eb97181cbb95..bfc4d75f50ff 100644
--- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -37,12 +37,15 @@ properties:
- description: PLL register block
clocks:
- maxItems: 2
+ minItems: 2
+ maxItems: 3
clock-names:
+ minItems: 2
items:
- const: aux
- const: cfg_ahb
+ - const: ref
"#clock-cells":
const: 1
@@ -64,6 +67,29 @@ required:
- "#clock-cells"
- "#phy-cells"
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,x1e80100-dp-phy
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ clock-names:
+ minItems: 3
+ maxItems: 3
+ else:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ minItems: 2
+ maxItems: 2
+
additionalProperties: false
examples:
--
2.48.1