1. Patchew
  2. linux
  3. [PATCH v1 0/8] Add RemoteProc cooling support
  4. View patch

[PATCH v1 5/8] arm64: dts: qcom: Enable cdsp qmi tmd devices for lemans

Gaurav Kohli posted 8 patches 1 month, 2 weeks ago
There is a newer version of this series
[PATCH v1 5/8] arm64: dts: qcom: Enable cdsp qmi tmd devices for lemans
Posted by Gaurav Kohli 1 month, 2 weeks ago 
Enable cdsp cooling devices and thermal zone cooling map bindings for
both cdsp and cdsp1.

Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 138 ++++++++++++++++++++++++---
 1 file changed, 126 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 0b154d57ba24..68cc4badaed5 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -21,6 +21,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -7018,6 +7019,14 @@ compute-cb@11 {
 					};
 				};
 			};
+
+			cooling {
+				compatible = "qcom,qmi-cooling-cdsp";
+					cdsp_sw0: cdsp_sw {
+						label = "cdsp_sw";
+						#cooling-cells = <2>;
+					};
+			};
 		};
 
 		remoteproc_cdsp1: remoteproc@2a300000 {
@@ -7174,6 +7183,15 @@ compute-cb@13 {
 					};
 				};
 			};
+
+
+			cooling {
+				compatible = "qcom,qmi-cooling-cdsp";
+					cdsp_sw1: cdsp_sw {
+						label = "cdsp_sw";
+						#cooling-cells = <2>;
+					};
+			};
 		};
 
 		remoteproc_adsp: remoteproc@30000000 {
@@ -7856,7 +7874,7 @@ nsp-0-0-0-thermal {
 			thermal-sensors = <&tsens2 5>;
 
 			trips {
-				trip-point0 {
+				nsp_0_0_0_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7868,6 +7886,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_0_0_alert0>;
+					cooling-device = <&cdsp_sw0
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-1-0-thermal {
@@ -7876,7 +7902,7 @@ nsp-0-1-0-thermal {
 			thermal-sensors = <&tsens2 6>;
 
 			trips {
-				trip-point0 {
+				nsp_0_1_0_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7888,6 +7914,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_1_0_alert0>;
+					cooling-device = <&cdsp_sw0
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-2-0-thermal {
@@ -7896,7 +7930,7 @@ nsp-0-2-0-thermal {
 			thermal-sensors = <&tsens2 7>;
 
 			trips {
-				trip-point0 {
+				nsp_0_2_0_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7908,6 +7942,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_2_0_alert0>;
+					cooling-device = <&cdsp_sw0
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-1-0-0-thermal {
@@ -7916,7 +7958,7 @@ nsp-1-0-0-thermal {
 			thermal-sensors = <&tsens2 8>;
 
 			trips {
-				trip-point0 {
+				nsp_1_0_0_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7928,6 +7970,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_1_0_0_alert0>;
+					cooling-device = <&cdsp_sw1
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-1-1-0-thermal {
@@ -7936,7 +7986,7 @@ nsp-1-1-0-thermal {
 			thermal-sensors = <&tsens2 9>;
 
 			trips {
-				trip-point0 {
+				nsp_1_1_0_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7948,6 +7998,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_1_1_0_alert0>;
+					cooling-device = <&cdsp_sw1
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-1-2-0-thermal {
@@ -7956,7 +8014,7 @@ nsp-1-2-0-thermal {
 			thermal-sensors = <&tsens2 10>;
 
 			trips {
-				trip-point0 {
+				nsp_1_2_0_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7968,6 +8026,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_1_2_0_alert0>;
+					cooling-device = <&cdsp_sw1
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		ddrss-0-thermal {
@@ -8110,7 +8176,7 @@ nsp-0-0-1-thermal {
 			thermal-sensors = <&tsens3 5>;
 
 			trips {
-				trip-point0 {
+				nsp_0_0_1_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -8122,6 +8188,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_0_1_alert0>;
+					cooling-device = <&cdsp_sw0
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-1-1-thermal {
@@ -8130,7 +8204,7 @@ nsp-0-1-1-thermal {
 			thermal-sensors = <&tsens3 6>;
 
 			trips {
-				trip-point0 {
+				nsp_0_1_1_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -8142,6 +8216,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_1_1_alert0>;
+					cooling-device = <&cdsp_sw0
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-2-1-thermal {
@@ -8150,7 +8232,7 @@ nsp-0-2-1-thermal {
 			thermal-sensors = <&tsens3 7>;
 
 			trips {
-				trip-point0 {
+				nsp_0_2_1_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -8162,6 +8244,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_2_1_alert0>;
+					cooling-device = <&cdsp_sw0
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-1-0-1-thermal {
@@ -8170,7 +8260,7 @@ nsp-1-0-1-thermal {
 			thermal-sensors = <&tsens3 8>;
 
 			trips {
-				trip-point0 {
+				nsp_1_0_1_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -8182,6 +8272,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_1_0_1_alert0>;
+					cooling-device = <&cdsp_sw1
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-1-1-1-thermal {
@@ -8190,7 +8288,7 @@ nsp-1-1-1-thermal {
 			thermal-sensors = <&tsens3 9>;
 
 			trips {
-				trip-point0 {
+				nsp_1_1_1_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -8202,6 +8300,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_1_1_1_alert0>;
+					cooling-device = <&cdsp_sw1
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-1-2-1-thermal {
@@ -8210,7 +8316,7 @@ nsp-1-2-1-thermal {
 			thermal-sensors = <&tsens3 10>;
 
 			trips {
-				trip-point0 {
+				nsp_1_2_1_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -8222,6 +8328,14 @@ trip-point1 {
 					type = "passive";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_1_2_1_alert0>;
+					cooling-device = <&cdsp_sw1
+							THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		ddrss-1-thermal {
-- 
2.34.1
Re: [PATCH v1 5/8] arm64: dts: qcom: Enable cdsp qmi tmd devices for lemans
Posted by Dmitry Baryshkov 1 month, 2 weeks ago 
On Tue, Dec 23, 2025 at 06:02:24PM +0530, Gaurav Kohli wrote:
> Enable cdsp cooling devices and thermal zone cooling map bindings for
> both cdsp and cdsp1.
> 
> Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/lemans.dtsi | 138 ++++++++++++++++++++++++---
>  1 file changed, 126 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
> index 0b154d57ba24..68cc4badaed5 100644
> --- a/arch/arm64/boot/dts/qcom/lemans.dtsi
> +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
> @@ -21,6 +21,7 @@
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/soc/qcom,gpr.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  / {
>  	interrupt-parent = <&intc>;
> @@ -7018,6 +7019,14 @@ compute-cb@11 {
>  					};
>  				};
>  			};
> +
> +			cooling {
> +				compatible = "qcom,qmi-cooling-cdsp";
> +					cdsp_sw0: cdsp_sw {

Please fix DT formatting here.

> +						label = "cdsp_sw";
> +						#cooling-cells = <2>;
> +					};
> +			};
>  		};
>  
>  		remoteproc_cdsp1: remoteproc@2a300000 {

-- 
With best wishes
Dmitry

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.