Talos EVK is  based on the Qualcomm SM6150 SoC.
It lacks a camera sensor in its default configuration.
This series adds CCI support and enables the IMX577 sensor via CSIPHY1
through device tree overlay.

We have tested IMX577 Sensor on CCI1 with following commands:
- media-ctl -d /dev/media0 --reset
- media-ctl -d /dev/media0 -V '"imx577 1-001a":0[fmt:SRGGB10/4056x3040 field:none]'
- media-ctl -d /dev/media0 -V '"msm_csiphy1":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -l '"msm_csiphy1":1->"msm_csid0":0[1]'
- media-ctl -d /dev/media0 -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- yavta -B capture-mplane -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 --capture=5

This patch series depends on patch series:
https://lore.kernel.org/all/20251222-sm6150-camss-v2-0-df8469a8343a@oss.qualcomm.com/
https://lore.kernel.org/all/20251201172222.3764933-1-tessolveupstream@gmail.com/

---
Wenmeng Liu (3):
      dt-bindings: i2c: qcom-cci: Document sm6150 compatible
      arm64: dts: qcom: talos: Add CCI definitions
      arm64: dts: qcom: talos-evk-camera: Add DT overlay

 .../devicetree/bindings/i2c/qcom,i2c-cci.yaml      | 18 ++++
 arch/arm64/boot/dts/qcom/Makefile                  |  2 +
 arch/arm64/boot/dts/qcom/talos-evk-camera.dtso     | 64 ++++++++++++++
 arch/arm64/boot/dts/qcom/talos.dtsi                | 97 ++++++++++++++++++++++
 4 files changed, 181 insertions(+)
---
base-commit: 1d9566d56c3b6d42b8d3684e940561ef783fe6a1
change-id: 20251222-sm6150_evk-8ebed9e9f3bc

Best regards,
-- 
Wenmeng <wenmeng.liu@oss.qualcomm.com>