On Sat, Dec 20, 2025 at 12:05:35PM +0530, Swati Agarwal wrote:
> Add support for the GL3590 4 ports USB3.2 hub. This allows to control its
> reset pins with a gpio.
Nit: please read Documentation/process/submitting-patches.rst. First
describe the reason for the change, then the actions to be done.
>
> Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
> ---
> drivers/usb/misc/onboard_usb_dev.c | 1 +
> drivers/usb/misc/onboard_usb_dev.h | 1 +
> 2 files changed, 2 insertions(+)
>
> diff --git a/drivers/usb/misc/onboard_usb_dev.c b/drivers/usb/misc/onboard_usb_dev.c
> index 41360a7591e5..bde303b820d7 100644
> --- a/drivers/usb/misc/onboard_usb_dev.c
> +++ b/drivers/usb/misc/onboard_usb_dev.c
> @@ -661,6 +661,7 @@ static const struct usb_device_id onboard_dev_id_table[] = {
> { USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 HUB */
> { USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 HUB */
> { USB_DEVICE(VENDOR_ID_GENESYS, 0x0620) }, /* Genesys Logic GL3523 USB 3.1 HUB */
> + { USB_DEVICE(VENDOR_ID_GENESYS, 0x0625) }, /* Genesys Logic GL3590 USB 3.2 HUB */
> { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2412) }, /* USB2412 USB 2.0 HUB */
> { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 HUB */
> { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 HUB */
> diff --git a/drivers/usb/misc/onboard_usb_dev.h b/drivers/usb/misc/onboard_usb_dev.h
> index c1462be5526d..7706a04f2630 100644
> --- a/drivers/usb/misc/onboard_usb_dev.h
> +++ b/drivers/usb/misc/onboard_usb_dev.h
> @@ -140,6 +140,7 @@ static const struct of_device_id onboard_dev_match[] = {
> { .compatible = "usb5e3,608", .data = &genesys_gl850g_data, },
> { .compatible = "usb5e3,610", .data = &genesys_gl852g_data, },
> { .compatible = "usb5e3,620", .data = &genesys_gl852g_data, },
> + { .compatible = "usb5e3,625", .data = &genesys_gl852g_data, },
> { .compatible = "usb5e3,626", .data = &genesys_gl852g_data, },
> { .compatible = "usbbda,179", .data = &realtek_rtl8188etv_data, },
> { .compatible = "usbbda,411", .data = &realtek_rts5411_data, },
> --
> 2.34.1
>
--
With best wishes
Dmitry