drivers/pci/controller/plda/pcie-starfive.c | 25 ++++++++++++--------- 1 file changed, 15 insertions(+), 10 deletions(-)
The "enable-gpio" property is obtained to control the 3V3 power supply
of PCIe slots but it is not documented in the dt-bindings and using
GPIO APIs is not a standard method to control PCIe slot power, so
use "vpcie3v3-supply" property and regulator APIs to replace them.
This change will break the DTs which add "enable-gpio" or "enable-gpios"
property under the node with compatible "starfive,jh7110-pcie".
Fortunately, there are no such DTs in the upstream mainline, so this
change has no impact on the upstream mainline.
If you have used "enable-gpio" or "enable-gpios" property in your
downstream DTs, please update it with "vpcie3v3-supply" after applying
this commit.
Acked-by: Kevin Xie <kevin.xie@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
This patch is derived from the reply of Manivannan [1].
And the previous version is [2].
Changes since [2]:
- Improve the commit messages. Add description to explain the impact of
this patch.
- Remove the Fixes tag and the Tested-by tag.
[1] https://lore.kernel.org/all/xxswzi4v6gpuqbe3cczj2yjmprhvln26fl5ligsp5vkiogrnwk@hpifxivaps6j/
[2] https://lore.kernel.org/all/20251125075604.69370-2-hal.feng@starfivetech.com/
---
drivers/pci/controller/plda/pcie-starfive.c | 25 ++++++++++++---------
1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
index 3caf53c6c082..298036c3e7f9 100644
--- a/drivers/pci/controller/plda/pcie-starfive.c
+++ b/drivers/pci/controller/plda/pcie-starfive.c
@@ -55,7 +55,7 @@ struct starfive_jh7110_pcie {
struct reset_control *resets;
struct clk_bulk_data *clks;
struct regmap *reg_syscon;
- struct gpio_desc *power_gpio;
+ struct regulator *vpcie3v3;
struct gpio_desc *reset_gpio;
struct phy *phy;
@@ -153,11 +153,13 @@ static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
"failed to get perst-gpio\n");
- pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
- GPIOD_OUT_LOW);
- if (IS_ERR(pcie->power_gpio))
- return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
- "failed to get power-gpio\n");
+ pcie->vpcie3v3 = devm_regulator_get_optional(dev, "vpcie3v3");
+ if (IS_ERR(pcie->vpcie3v3)) {
+ if (PTR_ERR(pcie->vpcie3v3) != -ENODEV)
+ return dev_err_probe(dev, PTR_ERR(pcie->vpcie3v3),
+ "failed to get vpcie3v3 regulator\n");
+ pcie->vpcie3v3 = NULL;
+ }
return 0;
}
@@ -270,8 +272,8 @@ static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
container_of(plda, struct starfive_jh7110_pcie, plda);
starfive_pcie_clk_rst_deinit(pcie);
- if (pcie->power_gpio)
- gpiod_set_value_cansleep(pcie->power_gpio, 0);
+ if (pcie->vpcie3v3)
+ regulator_disable(pcie->vpcie3v3);
starfive_pcie_disable_phy(pcie);
}
@@ -304,8 +306,11 @@ static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
if (ret)
return ret;
- if (pcie->power_gpio)
- gpiod_set_value_cansleep(pcie->power_gpio, 1);
+ if (pcie->vpcie3v3) {
+ ret = regulator_enable(pcie->vpcie3v3);
+ if (ret)
+ dev_err_probe(dev, ret, "failed to enable vpcie3v3 regulator\n");
+ }
if (pcie->reset_gpio)
gpiod_set_value_cansleep(pcie->reset_gpio, 1);
base-commit: ea1013c1539270e372fc99854bc6e4d94eaeff66
--
2.43.2
© 2016 - 2025 Red Hat, Inc.