Apply analogix_dp_finish_probe() in order to move the panel/bridge
parsing from Rockchip side to the Analogix side.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

---

Changes in v4:
- Rename analogix_dp_find_panel_or_bridge() to
  analogix_dp_finish_probe().

Changes in v5:
- Remove DRM_DISPLAY_DP_AUX_BUS for ROCKCHIP_ANALOGIX_DP
---
 .../gpu/drm/rockchip/analogix_dp-rockchip.c   | 38 +------------------
 1 file changed, 2 insertions(+), 36 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 7fa17ba26c46..832e9766bef0 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -21,14 +21,12 @@
 #include <video/of_videomode.h>
 #include <video/videomode.h>
 
-#include <drm/display/drm_dp_aux_bus.h>
 #include <drm/display/drm_dp_helper.h>
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge_connector.h>
 #include <drm/bridge/analogix_dp.h>
 #include <drm/drm_of.h>
-#include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_simple_kms_helper.h>
@@ -417,24 +415,6 @@ static const struct component_ops rockchip_dp_component_ops = {
 	.unbind = rockchip_dp_unbind,
 };
 
-static int rockchip_dp_link_panel(struct drm_dp_aux *aux)
-{
-	struct analogix_dp_plat_data *plat_data = analogix_dp_aux_to_plat_data(aux);
-	struct rockchip_dp_device *dp = pdata_encoder_to_dp(plat_data);
-	int ret;
-
-	/*
-	 * If drm_of_find_panel_or_bridge() returns -ENODEV, there may be no valid panel
-	 * or bridge nodes. The driver should go on for the driver-free bridge or the DP
-	 * mode applications.
-	 */
-	ret = drm_of_find_panel_or_bridge(dp->dev->of_node, 1, 0, &plat_data->panel, NULL);
-	if (ret && ret != -ENODEV)
-		return ret;
-
-	return component_add(dp->dev, &rockchip_dp_component_ops);
-}
-
 static int rockchip_dp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -473,6 +453,7 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 	dp->plat_data.dev_type = dp->data->chip_type;
 	dp->plat_data.power_on = rockchip_dp_poweron;
 	dp->plat_data.power_off = rockchip_dp_powerdown;
+	dp->plat_data.ops = &rockchip_dp_component_ops;
 
 	ret = rockchip_dp_of_probe(dp);
 	if (ret < 0)
@@ -484,22 +465,7 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 	if (IS_ERR(dp->adp))
 		return PTR_ERR(dp->adp);
 
-	ret = devm_of_dp_aux_populate_bus(analogix_dp_get_aux(dp->adp), rockchip_dp_link_panel);
-	if (ret) {
-		/*
-		 * If devm_of_dp_aux_populate_bus() returns -ENODEV, the done_probing() will not
-		 * be called because there are no EP devices. Then the rockchip_dp_link_panel()
-		 * will be called directly in order to support the other valid DT configurations.
-		 *
-		 * NOTE: The devm_of_dp_aux_populate_bus() is allowed to return -EPROBE_DEFER.
-		 */
-		if (ret != -ENODEV)
-			return dev_err_probe(dp->dev, ret, "failed to populate aux bus\n");
-
-		return rockchip_dp_link_panel(analogix_dp_get_aux(dp->adp));
-	}
-
-	return 0;
+	return analogix_dp_finish_probe(dp->adp);
 }
 
 static void rockchip_dp_remove(struct platform_device *pdev)
-- 
2.34.1

Apply analogix_dp_finish_probe() in order to move the panel/bridge
parsing from Exynos side to the Analogix side.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

---

Changes in v4:
- Rename analogix_dp_find_panel_or_bridge() to
  analogix_dp_finish_probe().

Changes in v7:
- Remove exynos_dp_legacy_bridge_init() and inline API
  devm_drm_of_display_mode_bridge().
- If the panel or the next_bridge is parsed from DT, use ptr validity
  to check whether to call component_add() directly at the end of
  probing.
---
 drivers/gpu/drm/exynos/exynos_dp.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 478eaa6f3175..6126820aad3b 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -157,9 +157,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np;
 	struct exynos_dp_device *dp;
-	struct drm_panel *panel;
-	struct drm_bridge *bridge;
-	int ret;
 
 	dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
 			  GFP_KERNEL);
@@ -186,30 +183,30 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, &bridge);
-	if (ret == -ENODEV) {
+	if (of_get_display_timings(dev->of_node)) {
 		dp->plat_data.next_bridge = devm_drm_of_display_mode_bridge(dp->dev,
 									dp->dev->of_node,
 									DRM_MODE_CONNECTOR_eDP);
-		ret = IS_ERR(dp->plat_data.next_bridge) ? PTR_ERR(dp->plat_data.next_bridge) : 0;
+		if (IS_ERR(dp->plat_data.next_bridge))
+			return PTR_ERR(dp->plat_data.next_bridge);
 	}
-	if (ret)
-		return ret;
 
 	/* The remote port can be either a panel or a bridge */
-	dp->plat_data.panel = panel;
-	dp->plat_data.next_bridge = bridge;
 	dp->plat_data.dev_type = EXYNOS_DP;
 	dp->plat_data.power_on = exynos_dp_poweron;
 	dp->plat_data.power_off = exynos_dp_poweroff;
 	dp->plat_data.attach = exynos_dp_bridge_attach;
+	dp->plat_data.ops = &exynos_dp_ops;
 
 out:
 	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
 	if (IS_ERR(dp->adp))
 		return PTR_ERR(dp->adp);
 
-	return component_add(&pdev->dev, &exynos_dp_ops);
+	if (dp->plat_data.panel || dp->plat_data.next_bridge)
+		return component_add(&pdev->dev, &exynos_dp_ops);
+	else
+		return analogix_dp_finish_probe(dp->adp);
 }
 
 static void exynos_dp_remove(struct platform_device *pdev)
-- 
2.34.1

Uniformly, move the next bridge attachment to the Analogix side
rather than scattered on Rockchip and Exynos sides. It can also
help get rid of the callback &analogix_dp_plat_data.attach() and
make codes more concise.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

------

Changes in v6:
- Move the next bridge attachment to the Analogix side rather than
  scattered on Rockchip and Exynos sides.
---
 .../gpu/drm/bridge/analogix/analogix_dp_core.c |  7 ++++---
 drivers/gpu/drm/exynos/exynos_dp.c             | 18 ------------------
 include/drm/bridge/analogix_dp.h               |  1 -
 3 files changed, 4 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 933f1843777f..a6c5601e16ff 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -930,10 +930,11 @@ static int analogix_dp_bridge_attach(struct drm_bridge *bridge,
 		return -EINVAL;
 	}
 
-	if (dp->plat_data->attach) {
-		ret = dp->plat_data->attach(dp->plat_data, bridge);
+	if (dp->plat_data->next_bridge) {
+		ret = drm_bridge_attach(dp->encoder, dp->plat_data->next_bridge, bridge,
+					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 		if (ret) {
-			DRM_ERROR("Failed at platform attach func\n");
+			dev_err(dp->dev, "failed to attach following panel or bridge (%d)\n", ret);
 			return ret;
 		}
 	}
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 6126820aad3b..6884ea6d04eb 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -68,23 +68,6 @@ static int exynos_dp_poweroff(struct analogix_dp_plat_data *plat_data)
 	return exynos_dp_crtc_clock_enable(plat_data, false);
 }
 
-static int exynos_dp_bridge_attach(struct analogix_dp_plat_data *plat_data,
-				   struct drm_bridge *bridge)
-{
-	struct exynos_dp_device *dp = to_dp(plat_data);
-	int ret;
-
-	/* Pre-empt DP connector creation if there's a bridge */
-	if (plat_data->next_bridge) {
-		ret = drm_bridge_attach(&dp->encoder, plat_data->next_bridge, bridge,
-					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
 static void exynos_dp_mode_set(struct drm_encoder *encoder,
 			       struct drm_display_mode *mode,
 			       struct drm_display_mode *adjusted_mode)
@@ -195,7 +178,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	dp->plat_data.dev_type = EXYNOS_DP;
 	dp->plat_data.power_on = exynos_dp_poweron;
 	dp->plat_data.power_off = exynos_dp_poweroff;
-	dp->plat_data.attach = exynos_dp_bridge_attach;
 	dp->plat_data.ops = &exynos_dp_ops;
 
 out:
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index bae969dec63a..854af692229b 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -34,7 +34,6 @@ struct analogix_dp_plat_data {
 
 	int (*power_on)(struct analogix_dp_plat_data *);
 	int (*power_off)(struct analogix_dp_plat_data *);
-	int (*attach)(struct analogix_dp_plat_data *, struct drm_bridge *);
 };
 
 int analogix_dp_resume(struct analogix_dp_device *dp);
-- 
2.34.1

The analogix_dp_unbind() should be balanced with analogix_dp_bind().
There are no bridge enabling and panel preparing in analogix_dp_bind(),
so it should be reasonable to remove the bridge disabing and panel
unpreparing in analogix_dp_unbind().

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index a6c5601e16ff..7e3e9d4f4ea2 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1526,10 +1526,6 @@ EXPORT_SYMBOL_GPL(analogix_dp_bind);
 
 void analogix_dp_unbind(struct analogix_dp_device *dp)
 {
-	analogix_dp_bridge_disable(&dp->bridge);
-
-	drm_panel_unprepare(dp->plat_data->panel);
-
 	drm_dp_aux_unregister(&dp->aux);
 }
 EXPORT_SYMBOL_GPL(analogix_dp_unbind);
-- 
2.34.1

In order to unify the handling of the panel and bridge, apply
panel_bridge helpers for Analogix DP driver. With this patch, the
bridge support will also become available.

The following changes have ben made:
- Apply plane_bridge helper to wrap the panel as the bridge.
- Remove the explicit panel APIs calls, which can be replaced with
  the automic bridge APIs calls wrapped by the panel.
- Remove the unnecessary analogix_dp_bridge_get_modes().

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

---

Changes in v4:
- Rename the &analogix_dp_plat_data.bridge to
  &analogix_dp_plat_data.next_bridge.

Changes in v5:
- Move panel_bridge addition a little forward.
- Move next_bridge attachment from Analogix side to Rockchip/Exynos
  side.

Changes in v6
- Remove the unnecessary analogix_dp_bridge_get_modes().
- Not to set DRM_BRIDGE_OP_MODES if the next is a panel.
- Squash [PATCH v5 15/17]drm/bridge: analogix_dp: Remove panel
  disabling and enabling in analogix_dp_set_bridge() into this
  commit.
- Fix the &drm_bridge->ops to DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT.
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 41 +++++--------------
 1 file changed, 11 insertions(+), 30 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 7e3e9d4f4ea2..d2ea93e1c9a3 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -749,9 +749,6 @@ static int analogix_dp_commit(struct analogix_dp_device *dp)
 {
 	int ret;
 
-	/* Keep the panel disabled while we configure video */
-	drm_panel_disable(dp->plat_data->panel);
-
 	ret = analogix_dp_train_link(dp);
 	if (ret) {
 		dev_err(dp->dev, "unable to do link train, ret=%d\n", ret);
@@ -771,9 +768,6 @@ static int analogix_dp_commit(struct analogix_dp_device *dp)
 		return ret;
 	}
 
-	/* Safe to enable the panel now */
-	drm_panel_enable(dp->plat_data->panel);
-
 	/* Check whether panel supports fast training */
 	ret = analogix_dp_fast_link_train_detection(dp);
 	if (ret)
@@ -858,17 +852,6 @@ static int analogix_dp_disable_psr(struct analogix_dp_device *dp)
 	return analogix_dp_send_psr_spd(dp, &psr_vsc, true);
 }
 
-static int analogix_dp_bridge_get_modes(struct drm_bridge *bridge, struct drm_connector *connector)
-{
-	struct analogix_dp_device *dp = to_dp(bridge);
-	int num_modes = 0;
-
-	if (dp->plat_data->panel)
-		num_modes += drm_panel_get_modes(dp->plat_data->panel, connector);
-
-	return num_modes;
-}
-
 static const struct drm_edid *analogix_dp_bridge_edid_read(struct drm_bridge *bridge,
 							   struct drm_connector *connector)
 {
@@ -909,7 +892,7 @@ analogix_dp_bridge_detect(struct drm_bridge *bridge, struct drm_connector *conne
 	struct analogix_dp_device *dp = to_dp(bridge);
 	enum drm_connector_status status = connector_status_disconnected;
 
-	if (dp->plat_data->panel || dp->plat_data->next_bridge)
+	if (dp->plat_data->next_bridge)
 		return connector_status_connected;
 
 	if (!analogix_dp_detect_hpd(dp))
@@ -995,8 +978,6 @@ static void analogix_dp_bridge_atomic_pre_enable(struct drm_bridge *bridge,
 	/* Don't touch the panel if we're coming back from PSR */
 	if (old_crtc_state && old_crtc_state->self_refresh_active)
 		return;
-
-	drm_panel_prepare(dp->plat_data->panel);
 }
 
 static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
@@ -1168,16 +1149,12 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
 	if (dp->dpms_mode != DRM_MODE_DPMS_ON)
 		return;
 
-	drm_panel_disable(dp->plat_data->panel);
-
 	disable_irq(dp->irq);
 
 	analogix_dp_set_analog_power_down(dp, POWER_ALL, 1);
 
 	pm_runtime_put_sync(dp->dev);
 
-	drm_panel_unprepare(dp->plat_data->panel);
-
 	dp->fast_train_enable = false;
 	dp->psr_supported = false;
 	dp->dpms_mode = DRM_MODE_DPMS_OFF;
@@ -1252,7 +1229,6 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
 	.atomic_post_disable = analogix_dp_bridge_atomic_post_disable,
 	.atomic_check = analogix_dp_bridge_atomic_check,
 	.attach = analogix_dp_bridge_attach,
-	.get_modes = analogix_dp_bridge_get_modes,
 	.edid_read = analogix_dp_bridge_edid_read,
 	.detect = analogix_dp_bridge_detect,
 };
@@ -1498,17 +1474,22 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
 		return ret;
 	}
 
-	if (dp->plat_data->panel)
-		bridge->ops = DRM_BRIDGE_OP_MODES | DRM_BRIDGE_OP_DETECT;
-	else
-		bridge->ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
-
+	bridge->ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
 	bridge->of_node = dp->dev->of_node;
 	bridge->type = DRM_MODE_CONNECTOR_eDP;
 	ret = devm_drm_bridge_add(dp->dev, &dp->bridge);
 	if (ret)
 		goto err_unregister_aux;
 
+	if (dp->plat_data->panel) {
+		dp->plat_data->next_bridge = devm_drm_panel_bridge_add(dp->dev,
+								       dp->plat_data->panel);
+		if (IS_ERR(dp->plat_data->next_bridge)) {
+			ret = PTR_ERR(bridge);
+			goto err_unregister_aux;
+		}
+	}
+
 	ret = drm_bridge_attach(dp->encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret) {
 		DRM_ERROR("failed to create bridge (%d)\n", ret);
-- 
2.34.1