Add the device tree include files for the EyeQ6Lplus system on chip
from Mobileye.
Those files provide the initial support of the SoC:
* The I6500 CPU and GIC interrupt controller.
* The OLB ("Other Logic Block") providing clocks, resets and pin controls.
* One UART.
* One GPIO controller.
* Two SPI controllers, one in host mode and one in target mode.
* One octoSPI flash controller.
* Two I2C controllers.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
---
arch/mips/boot/dts/mobileye/eyeq6lplus-pins.dtsi | 84 +++++++++++
arch/mips/boot/dts/mobileye/eyeq6lplus.dtsi | 169 +++++++++++++++++++++++
2 files changed, 253 insertions(+)
diff --git a/arch/mips/boot/dts/mobileye/eyeq6lplus-pins.dtsi b/arch/mips/boot/dts/mobileye/eyeq6lplus-pins.dtsi
new file mode 100644
index 000000000000..5cb0660f46c6
--- /dev/null
+++ b/arch/mips/boot/dts/mobileye/eyeq6lplus-pins.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+&olb {
+ timer0_pins: timer0-pins {
+ function = "timer0";
+ pins = "PA0", "PA1";
+ };
+ timer1_pins: timer1-pins {
+ function = "timer1";
+ pins = "PA2", "PA3";
+ };
+ uart_ssi_pins: uart-ssi-pins {
+ function = "uart_ssi";
+ pins = "PA4", "PA5";
+ };
+ spi0_pins: spi0-pins {
+ function = "spi0";
+ pins = "PA6", "PA7", "PA8", "PA9";
+ };
+ uart0_pins: uart0-pins {
+ function = "uart0";
+ pins = "PA11", "PA12";
+ };
+ timer2_pins: timer2-pins {
+ function = "timer2";
+ pins = "PA13", "PA14";
+ };
+ timer3_pins: timer3-pins {
+ function = "timer3";
+ pins = "PA15", "PA16";
+ };
+ timer_ext0_pins: timer-ext0-pins {
+ function = "timer_ext0";
+ pins = "PA17", "PA18", "PA19", "PA20";
+ };
+ timer_ext0_input_a_pins: timer-ext0-input-a-pins {
+ function = "timer_ext0";
+ pins = "PA17";
+ };
+ pps0_pins: pps0-pins {
+ function = "timer_ext0";
+ pins = "PA17";
+ };
+ timer_ext0_input_b_pins: timer-ext0-input-b-pins {
+ function = "timer_ext0";
+ pins = "PA18";
+ };
+ timer_ext0_output_pins: timer-ext0-output-pins {
+ function = "timer_ext0";
+ pins = "PA19", "PA20";
+ };
+ spi1_pins: spi1-pins {
+ function = "spi1";
+ pins = "PA21", "PA22", "PA23", "PA24";
+ };
+ spi1_reduced_pins: spi1-reduced-pins {
+ function = "spi1";
+ pins = "PA21", "PA22", "PA23";
+ };
+ timer_ext1_pins: timer-ext1-pins {
+ function = "timer_ext1";
+ pins = "PA26", "PA27", "PA28", "PA29";
+ };
+ timer_ext1_input_a_pins: timer-ext1-input-a-pins {
+ function = "timer_ext1";
+ pins = "PA26";
+ };
+ timer_ext1_input_b_pins: timer-ext1-input-b-pins {
+ function = "timer_ext1";
+ pins = "PA27";
+ };
+ timer_ext1_output_pins: timer-ext1-output-pins {
+ function = "timer_ext1";
+ pins = "PA28", "PA29";
+ };
+ ext_ref_clk_pins: ext-ref-clk-pins {
+ function = "ext_ref_clk";
+ pins = "PA30";
+ };
+ mipi_ref_clk_pins: mipi-ref-clk-pins {
+ function = "mipi_ref_clk";
+ pins = "PA31";
+ };
+};
diff --git a/arch/mips/boot/dts/mobileye/eyeq6lplus.dtsi b/arch/mips/boot/dts/mobileye/eyeq6lplus.dtsi
new file mode 100644
index 000000000000..28131ea558f6
--- /dev/null
+++ b/arch/mips/boot/dts/mobileye/eyeq6lplus.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Copyright 2025 Mobileye Vision Technologies Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+#include <dt-bindings/clock/mobileye,eyeq6lplus-clk.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "img,i6500";
+ reg = <0>;
+ clocks = <&olb EQ6LPC_CPU_OCC>;
+ };
+ };
+
+ cpu_intc: interrupt-controller {
+ compatible = "mti,cpu-interrupt-controller";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ coherency-manager {
+ compatible = "mobileye,eyeq6-cm";
+ };
+
+ xtal: clock-30000000 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <30000000>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ olb: system-controller@e8400000 {
+ compatible = "mobileye,eyeq6lplus-olb", "syscon";
+ reg = <0 0xe8400000 0x0 0x80000>;
+ #reset-cells = <2>;
+ #clock-cells = <1>;
+ clocks = <&xtal>;
+ clock-names = "ref";
+ };
+
+ ospi: spi@e8800000 {
+ compatible = "mobileye,eyeq5-ospi", "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0xe8800000 0x0 0x100000>,
+ <0 0xb0000000 0x0 0x30000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 10 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x00000000>;
+ clocks = <&olb EQ6LPC_PER_OSPI>;
+ status = "disabled";
+ };
+
+ spi0: spi@eac0d000 {
+ compatible = "snps,dw-apb-ssi";
+ reg = <0 0xeac0d000 0x0 0x1000>;
+ clocks = <&olb EQ6LPC_PER_SPI>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 11 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&olb 0 0>;
+ reset-names = "spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@eac0e000 {
+ compatible = "snps,dw-apb-ssi";
+ reg = <0 0xeac0e000 0x0 0x1000>;
+ spi-slave;
+ clocks = <&olb EQ6LPC_PER_SPI>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&olb 0 1>;
+ reset-names = "spi";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart0: serial@eac10000 {
+ compatible = "snps,dw-apb-uart";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&olb EQ6LPC_PER_UART>;
+ clock-frequency = <15625000>;
+ reg = <0 0xeac10000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 8 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&olb 0 2>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@eac11000 {
+ compatible = "mobileye,eyeq6lplus-i2c", "snps,designware-i2c";
+ reg = <0 0xeac11000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&olb EQ6LPC_PER_I2C_SER>;
+ resets = <&olb 0 3>;
+ i2c-sda-hold-time-ns = <50>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@eac12000 {
+ compatible = "mobileye,eyeq6lplus-i2c", "snps,designware-i2c";
+ reg = <0 0xeac12000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 7 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&olb EQ6LPC_PER_I2C_SER>;
+ resets = <&olb 0 4>;
+ i2c-sda-hold-time-ns = <50>;
+ status = "disabled";
+ };
+
+ gpio: gpio@eac14000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0 0xeac14000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&olb 0 13>;
+ porta: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ gpio-ranges = <&olb 0 0 32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gic: interrupt-controller@f0920000 {
+ compatible = "mti,gic";
+ reg = <0x0 0xf0920000 0x0 0x20000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&cpu_intc>;
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&olb EQ6LPC_CPU_OCC>;
+ };
+ };
+ };
+};
+
+#include "eyeq6lplus-pins.dtsi"
--
2.52.0