Signed-off-by: David Heidelberg <david@ixit.cz>
---
Changes in v3:
- Add commit improving vdda-phy-supply description to match more recent
  bindings.
- Double-checked and specified it's 1.2 V vdda-pll-supply. (Vladimir)
- Link to v2: https://lore.kernel.org/r/20251213-docs-camss-fixes-v2-1-a8a4d4d51c6c@ixit.cz

Changes in v2:
- Applied suggestion to clarify the description. (Krzysztof)
- Link to v1: https://lore.kernel.org/r/20251212-docs-camss-fixes-v1-1-5c011505ff59@ixit.cz

---
David Heidelberg (2):
      media: dt-bindings: Correct camss VDDA PLL supply description
      media: dt-bindings: Update camss VDDA PHY supply description

 Documentation/devicetree/bindings/media/qcom,sa8775p-camss.yaml  | 4 ++--
 Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml   | 4 ++--
 Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml | 4 ++--
 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml   | 4 ++--
 Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml   | 4 ++--
 Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml   | 4 ++--
 Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml   | 2 +-
 7 files changed, 13 insertions(+), 13 deletions(-)
---
base-commit: 563c8dd425b59e44470e28519107b1efc99f4c7b
change-id: 20251212-docs-camss-fixes-0fa525271951

Best regards,
-- 
David Heidelberg <david@ixit.cz>

btw. I looked at qcom,qcm2290-camss.yaml and if there isn't something 
very specific about qcm2290, the supply may have wrong voltrage.
I'll leave this for someone with datasheets (cc Loic):

   vdd-csiphy-1p8-supply:
     description:
       Phandle to 1.8V regulator supply to CSI PHYs pll block.

as see on the mailing list the 0.8V example was given and changed to 
1.8V, so maybe it has a reason, just making a note to be extra sure 
while touching the docs.

David
-- 
David Heidelberg