[PATCH v7 7/8] arm64: dts: qcom: ipq5424: add nodes to bring up q6

George Moussalem via B4 Relay posted 8 patches 1 day, 4 hours ago
[PATCH v7 7/8] arm64: dts: qcom: ipq5424: add nodes to bring up q6
Posted by George Moussalem via B4 Relay 1 day, 4 hours ago
From: Gokul Sriram Palanisamy <gokul.sriram.p@oss.qualcomm.com>

Enable nodes required for q6 remoteproc bring up.

Signed-off-by: Gokul Sriram Palanisamy <gokul.sriram.p@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
 arch/arm64/boot/dts/qcom/ipq5424.dtsi | 68 +++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index eb393f3fd728f0b2fc8cd93c849f8c170d76e312..08fcda401556eb2a16d317966cd39c006e109b25 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -222,6 +222,35 @@ tfa@8a832000 {
 			no-map;
 			status = "disabled";
 		};
+
+		q6_region: wcss@8a900000 {
+			reg = <0x0 0x8a900000 0x0 0x2800000>;
+			no-map;
+		};
+	};
+
+	wcss: smp2p-wcss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 501 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 9>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_wcss_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_wcss_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	soc@0 {
@@ -752,6 +781,37 @@ dwc_0: usb@8a00000 {
 			};
 		};
 
+		q6v5_wcss: remoteproc@d100000 {
+			compatible = "qcom,ipq5424-wcss-sec-pil";
+			reg = <0 0x0d100000 0 0x4040>;
+			firmware-name = "ath12k/IPQ5424/hw1.0/q6_fw0.mbn";
+			interrupts-extended = <&intc GIC_SPI 508 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcss_in 0 0>,
+					      <&smp2p_wcss_in 1 0>,
+					      <&smp2p_wcss_in 2 0>,
+					      <&smp2p_wcss_in 3 0>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			mboxes = <&tmel_qmp 0>;
+			qcom,smem-states = <&smp2p_wcss_out 1>,
+					   <&smp2p_wcss_out 0>;
+			qcom,smem-state-names = "stop",
+						"shutdown";
+
+			memory-region = <&q6_region>;
+
+			glink-edge {
+				interrupts = <GIC_SPI 500 IRQ_TYPE_EDGE_RISING>;
+				label = "rtr";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 8>;
+			};
+		};
+
 		timer@f420000 {
 			compatible = "arm,armv7-timer-mem";
 			reg = <0 0xf420000 0 0x1000>;
@@ -811,6 +871,14 @@ frame@f42d000 {
 			};
 		};
 
+		apcs_glb: mailbox@f400000 {
+			compatible = "qcom,ipq5424-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0 0x0f400000 0 0x10000>;
+			#clock-cells = <1>;
+			#mbox-cells = <1>;
+		};
+
 		apss_clk: clock-controller@fa80000 {
 			compatible = "qcom,ipq5424-apss-clk";
 			reg = <0x0 0x0fa80000 0x0 0x20000>;

-- 
2.52.0
Re: [PATCH v7 7/8] arm64: dts: qcom: ipq5424: add nodes to bring up q6
Posted by Dmitry Baryshkov 14 hours ago
On Mon, Dec 15, 2025 at 10:35:12AM +0400, George Moussalem via B4 Relay wrote:
> From: Gokul Sriram Palanisamy <gokul.sriram.p@oss.qualcomm.com>
> 
> Enable nodes required for q6 remoteproc bring up.
> 
> Signed-off-by: Gokul Sriram Palanisamy <gokul.sriram.p@oss.qualcomm.com>
> Signed-off-by: George Moussalem <george.moussalem@outlook.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq5424.dtsi | 68 +++++++++++++++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry