From: David Heidelberg <david@ixit.cz>

There are shared for the whole architecture, so let's define these in
proper place.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 43 ++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index bf2f9c04adba7..97bd9513b011b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2805,6 +2805,49 @@ tlmm: pinctrl@3400000 {
 			gpio-ranges = <&tlmm 0 0 151>;
 			wakeup-parent = <&pdc_intc>;
 
+			cam_mclk0_default: cam-mclk0-default-state {
+				pins = "gpio13";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk0_sleep: cam-mclk0-sleep-state {
+				pins = "gpio13";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam_mclk1_default: cam-mclk1-default-state {
+				pins = "gpio14";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk1_sleep: cam-mclk1-sleep-state {
+				pins = "gpio14";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam_mclk2_default: cam-mclk2-default-state {
+				pins = "gpio15";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk2_sleep: cam-mclk2-sleep-state {
+				pins = "gpio15";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+
 			cci0_default: cci0-default-state {
 				/* SDA, SCL */
 				pins = "gpio17", "gpio18";

-- 
2.51.0

On 12/13/25 14:00, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <david@ixit.cz>
> 
> There are shared for the whole architecture, so let's define these in
> proper place.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>   arch/arm64/boot/dts/qcom/sdm845.dtsi | 43 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 43 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index bf2f9c04adba7..97bd9513b011b 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2805,6 +2805,49 @@ tlmm: pinctrl@3400000 {
>   			gpio-ranges = <&tlmm 0 0 151>;
>   			wakeup-parent = <&pdc_intc>;
>   
> +			cam_mclk0_default: cam-mclk0-default-state {
> +				pins = "gpio13";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam_mclk0_sleep: cam-mclk0-sleep-state {
> +				pins = "gpio13";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-pull-down;
> +			};
> +
> +			cam_mclk1_default: cam-mclk1-default-state {
> +				pins = "gpio14";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam_mclk1_sleep: cam-mclk1-sleep-state {
> +				pins = "gpio14";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-pull-down;
> +			};
> +
> +			cam_mclk2_default: cam-mclk2-default-state {
> +				pins = "gpio15";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam_mclk2_sleep: cam-mclk2-sleep-state {
> +				pins = "gpio15";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-pull-down;
> +			};
> +
> +

Please remove an excessive blank line.

>   			cci0_default: cci0-default-state {
>   				/* SDA, SCL */
>   				pins = "gpio17", "gpio18";
> 

Please add mclk3 to the list, it's one of the gpio16 pad functions.

After adding that

Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

-- 
Best wishes,
Vladimir