.../boot/dts/microchip/usb_a9g20-dab-mmx.dtsi | 93 ------------------- 1 file changed, 93 deletions(-) delete mode 100644 arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
This .dtsi file is not included anywhere in the tree and can't be
tested.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
.../boot/dts/microchip/usb_a9g20-dab-mmx.dtsi | 93 -------------------
1 file changed, 93 deletions(-)
delete mode 100644 arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
deleted file mode 100644
index 5b1d80c0ab26..000000000000
--- a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-/ {
- ahb {
- apb {
- usart1: serial@fffb4000 {
- status = "okay";
- };
-
- usart3: serial@fffd0000 {
- status = "okay";
- };
- };
- };
-
- i2c-gpio@0 {
- status = "okay";
- };
-
- leds {
- compatible = "gpio-leds";
-
- user_led1 {
- label = "user_led1";
- gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
- };
-
-/*
-* led already used by mother board but active as high
-* user_led2 {
-* label = "user_led2";
-* gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-* };
-*/
- user_led3 {
- label = "user_led3";
- gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
- };
-
- user_led4 {
- label = "user_led4";
- gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
- };
-
- red {
- label = "red";
- gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
- };
-
- orange {
- label = "orange";
- gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
- };
-
- green {
- label = "green";
- gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- button-user-pb1 {
- label = "user_pb1";
- gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
- linux,code = <0x100>;
- };
-
- button-user-pb2 {
- label = "user_pb2";
- gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
- linux,code = <0x101>;
- };
-
- button-user-pb3 {
- label = "user_pb3";
- gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
- linux,code = <0x102>;
- };
-
- button-user-pb4 {
- label = "user_pb4";
- gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
- linux,code = <0x103>;
- };
- };
-};
--
2.51.0
On Fri, Dec 12, 2025 at 02:32:14PM -0600, Rob Herring (Arm) wrote: > This .dtsi file is not included anywhere in the tree and can't be > tested. > > Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Nowadays, this should be a dtso which did not exist back then. Is it okay to convert it? Yes, I can do this.
On 13/12/2025 09:03:39+0900, Wolfram Sang wrote: > On Fri, Dec 12, 2025 at 02:32:14PM -0600, Rob Herring (Arm) wrote: > > This .dtsi file is not included anywhere in the tree and can't be > > tested. > > > > Signed-off-by: Rob Herring (Arm) <robh@kernel.org> > > Nowadays, this should be a dtso which did not exist back then. Is it > okay to convert it? Yes, I can do this. > I don't think this will be missed by anyone. Unless you actually have one of the boards, I would simply drop this. -- Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
On 12/12/2025 14:32:14-0600, Rob Herring (Arm) wrote:
> This .dtsi file is not included anywhere in the tree and can't be
> tested.
>
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> .../boot/dts/microchip/usb_a9g20-dab-mmx.dtsi | 93 -------------------
> 1 file changed, 93 deletions(-)
> delete mode 100644 arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
>
> diff --git a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
> deleted file mode 100644
> index 5b1d80c0ab26..000000000000
> --- a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
> +++ /dev/null
> @@ -1,93 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
> - *
> - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> - */
> -
> -/ {
> - ahb {
> - apb {
> - usart1: serial@fffb4000 {
> - status = "okay";
> - };
> -
> - usart3: serial@fffd0000 {
> - status = "okay";
> - };
> - };
> - };
> -
> - i2c-gpio@0 {
> - status = "okay";
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - user_led1 {
> - label = "user_led1";
> - gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
> - };
> -
> -/*
> -* led already used by mother board but active as high
> -* user_led2 {
> -* label = "user_led2";
> -* gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
> -* };
> -*/
> - user_led3 {
> - label = "user_led3";
> - gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
> - };
> -
> - user_led4 {
> - label = "user_led4";
> - gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
> - };
> -
> - red {
> - label = "red";
> - gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
> - };
> -
> - orange {
> - label = "orange";
> - gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
> - };
> -
> - green {
> - label = "green";
> - gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
> - };
> - };
> -
> - gpio_keys {
> - compatible = "gpio-keys";
> -
> - button-user-pb1 {
> - label = "user_pb1";
> - gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
> - linux,code = <0x100>;
> - };
> -
> - button-user-pb2 {
> - label = "user_pb2";
> - gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
> - linux,code = <0x101>;
> - };
> -
> - button-user-pb3 {
> - label = "user_pb3";
> - gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
> - linux,code = <0x102>;
> - };
> -
> - button-user-pb4 {
> - label = "user_pb4";
> - gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
> - linux,code = <0x103>;
> - };
> - };
> -};
> --
> 2.51.0
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
© 2016 - 2025 Red Hat, Inc.