Hi,

This patchset brings support for Silicon Labs' Co-Processor
Communication (CPC) protocol as transport layer for Greybus. This is
introduced as a module that sits between Greybus and CPC Host Device
Drivers implementations, like SDIO or SPI. This patchset includes SDIO
as physical layer but the protocol is not final and might change, it's
mostly there to showcase all the elements.

    +----------------------------------------------------+
    |                      Greybus                       |
    +----------------------------------------------------+
			     /|\
			      |
			     \|/
    +----------------------------------------------------+
    |                        CPC                         |
    +----------------------------------------------------+
	  /|\                /|\                /|\
	   |                  |                  |
	  \|/                \|/                \|/
      +----------+       +---------+       +-----------+
      |   SDIO   |       |   SPI   |       |   Others  |
      +----------+       +---------+       +-----------+


CPC implements some of the features of Unipro that Greybus relies upon,
like reliable transmission. CPC takes care of detecting transmission
errors and retransmit frames if necessary, but that feature is not part
of the RFC to keep it concise. There's also a flow-control
feature, preventing sending messages to already full cports.

In order to implement these features, a 4-byte header is prepended to
Greybus messages, making the whole header 12 bytes (Greybus header
itself is 8 bytes).

This RFC starts by implementing a shim layer between physical bus
drivers (like SDIO and SPI) and Greybus, and progressively add more
elements to it to make it useful in its own right. Finally, an SDIO
driver is added to enable the communication with a remote device.


Changes since the RFC:
  - added missing Signed-off-by on one commit
  - added SDIO driver to give a full example

Damien Riégel (13):
  greybus: cpc: add minimal CPC Host Device infrastructure
  greybus: cpc: introduce CPC cport structure
  greybus: cpc: use socket buffers instead of gb_message in TX path
  greybus: cpc: pack cport ID in Greybus header
  greybus: cpc: switch RX path to socket buffers
  greybus: cpc: introduce CPC header structure
  greybus: cpc: account for CPC header size in RX and TX path
  greybus: cpc: add and validate sequence numbers
  greybus: cpc: acknowledge all incoming messages
  greybus: cpc: use holding queue instead of sending out immediately
  greybus: cpc: honour remote's RX window
  greybus: cpc: let host device drivers dequeue TX frames
  greybus: cpc: add private data pointer in CPC Host Device

Gabriel Beaulieu (1):
  greybus: cpc: add CPC SDIO host driver

 MAINTAINERS                    |   6 +
 drivers/greybus/Kconfig        |   2 +
 drivers/greybus/Makefile       |   2 +
 drivers/greybus/cpc/Kconfig    |  22 ++
 drivers/greybus/cpc/Makefile   |   9 +
 drivers/greybus/cpc/cpc.h      |  75 +++++
 drivers/greybus/cpc/cport.c    | 107 +++++++
 drivers/greybus/cpc/header.c   | 146 +++++++++
 drivers/greybus/cpc/header.h   |  55 ++++
 drivers/greybus/cpc/host.c     | 313 +++++++++++++++++++
 drivers/greybus/cpc/host.h     |  63 ++++
 drivers/greybus/cpc/protocol.c | 167 ++++++++++
 drivers/greybus/cpc/sdio.c     | 554 +++++++++++++++++++++++++++++++++
 13 files changed, 1521 insertions(+)
 create mode 100644 drivers/greybus/cpc/Kconfig
 create mode 100644 drivers/greybus/cpc/Makefile
 create mode 100644 drivers/greybus/cpc/cpc.h
 create mode 100644 drivers/greybus/cpc/cport.c
 create mode 100644 drivers/greybus/cpc/header.c
 create mode 100644 drivers/greybus/cpc/header.h
 create mode 100644 drivers/greybus/cpc/host.c
 create mode 100644 drivers/greybus/cpc/host.h
 create mode 100644 drivers/greybus/cpc/protocol.c
 create mode 100644 drivers/greybus/cpc/sdio.c

-- 
2.49.0