The Omnivision OS05B10 is a 1/2.78-Inch CMOS image sensor with an
active array size of 2592 x 1944.

The following features are supported:
- Manual exposure an gain control support.
- vblank/hblank control support.
- Supported resolution: 2592 x 1944 @ 60fps (SBGGR10).

The driver is tested on mainline branch v6.17 on IMX8MP Verdin Toradex.

v4l2-compliance 1.26.1-5142, 64 bits, 64-bit time_t
v4l2-compliance SHA: 4aee01a02792 2023-12-12 21:40:38

Compliance test for device /dev/v4l-subdev3:

Driver Info:
        Driver version   : 6.17.0
        Capabilities     : 0x00000000

Required ioctls:
        test VIDIOC_SUDBEV_QUERYCAP: OK
        test invalid ioctls: OK

Allow for multiple opens:
        test second /dev/v4l-subdev3 open: OK
        test VIDIOC_SUBDEV_QUERYCAP: OK
        test for unlimited opens: OK

Debug ioctls:
        test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
        test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
        test VIDIOC_ENUMAUDIO: OK (Not Supported)
        test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
        test VIDIOC_G/S_AUDIO: OK (Not Supported)
        Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
        test VIDIOC_G/S_MODULATOR: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_ENUMAUDOUT: OK (Not Supported)
        test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
        test VIDIOC_G/S_AUDOUT: OK (Not Supported)
        Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
        test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
        test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
        test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
        test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
        test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
        test VIDIOC_QUERYCTRL: OK
        test VIDIOC_G/S_CTRL: OK
        test VIDIOC_G/S/TRY_EXT_CTRLS: OK
        test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
        test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
        Standard Controls: 9 Private Controls: 0

Format ioctls:
        test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
        test VIDIOC_G/S_PARM: OK (Not Supported)
        test VIDIOC_G_FBUF: OK (Not Supported)
        test VIDIOC_G_FMT: OK (Not Supported)
        test VIDIOC_TRY_FMT: OK (Not Supported)
        test VIDIOC_S_FMT: OK (Not Supported)
        test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
        test Cropping: OK (Not Supported)
        test Composing: OK (Not Supported)
        test Scaling: OK (Not Supported)

Codec ioctls:
        test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
        test VIDIOC_G_ENC_INDEX: OK (Not Supported)
        test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
        test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
        test CREATE_BUFS maximum buffers: OK
        test VIDIOC_EXPBUF: OK (Not Supported)
        test Requests: OK (Not Supported)

Total for device /dev/v4l-subdev3: 44, Succeeded: 44, Failed: 0, Warnings: 0

v2 -> v3

In Patch 1/2:
- Fixed space symbol is missing before 'optical'
- Changed the reset pin control to "active low"

In Patch 2/2:
- Correct the module name in Kconfig
- Fixed use of dev_err_probe() on endpoint parse failure
- used devm_v4l2_sensor_clk_get() instead of devm_clk_get()

v1 -> v2

In Patch 1/2:
- Fixed indentation.

In Patch 2/2:
- Fixed bug in probe() removed unused variable "ret"

Elgin Perumbilly (1):
  dt-bindings: media: i2c: Add os05b10 sensor

Himanshu Bhavani (1):
  media: i2c: add os05b10 image sensor driver

 .../bindings/media/i2c/ovti,os05b10.yaml      |  103 ++
 MAINTAINERS                                   |    8 +
 drivers/media/i2c/Kconfig                     |   10 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/os05b10.c                   | 1115 +++++++++++++++++
 5 files changed, 1237 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,os05b10.yaml
 create mode 100644 drivers/media/i2c/os05b10.c

--
2.34.1