This driver controls the Hardware Monitor block of the Advantech EIO chip.
Signed-off-by: Ramiro Oliveira <ramiro.oliveira@advantech.com>
---
MAINTAINERS | 1 +
drivers/hwmon/Kconfig | 10 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/eio-hwmon.c | 344 ++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 356 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 359d4a13f212..fdd39b152f41 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -620,6 +620,7 @@ ADVANTECH EIO DRIVER
M: Ramiro Oliveira <ramiro.oliveira@advantech.com>
S: Maintained
F: drivers/gpio/gpio-eio.c
+F: drivers/hwmon/eio-hwmon.c
F: drivers/mfd/eio_core.c
F: include/linux/mfd/eio.h
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 157678b821fc..08993b993596 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2043,6 +2043,16 @@ config SENSORS_DME1737
This driver can also be built as a module. If so, the module
will be called dme1737.
+config SENSORS_EIO
+ tristate "Advantech EIO HWMON"
+ depends on MFD_EIO
+ help
+ If you say yes here you get support for the Advantech EIO
+ temperature, voltage and fan speed monitoring block.
+
+ This driver can also be built as a module. If so, the module
+ will be called eio-hwmon
+
config SENSORS_EMC1403
tristate "SMSC EMC1403/23 thermal sensor"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index eade8e3b1bde..e69f03b41fae 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DRIVETEMP) += drivetemp.o
obj-$(CONFIG_SENSORS_DS620) += ds620.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
+obj-$(CONFIG_SENSORS_EIO) += eio-hwmon.o
obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
obj-$(CONFIG_SENSORS_EMC2305) += emc2305.o
diff --git a/drivers/hwmon/eio-hwmon.c b/drivers/hwmon/eio-hwmon.c
new file mode 100644
index 000000000000..164591aa31a7
--- /dev/null
+++ b/drivers/hwmon/eio-hwmon.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for Advantech EIO embedded controller.
+ *
+ * Copyright (C) 2025 Advantech Corporation. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/eio.h>
+#include <linux/module.h>
+
+#define MAX_DEV 128
+#define MAX_NAME 32
+
+static uint timeout;
+module_param(timeout, uint, 0444);
+MODULE_PARM_DESC(timeout,
+ "Default pmc command timeout in micro-seconds.\n");
+
+struct eio_hwmon_dev {
+ struct device *mfd;
+};
+
+enum _sen_type {
+ NONE,
+ VOLTAGE,
+ CURRENT,
+ TEMP,
+ PWM,
+ TACHO,
+ FAN,
+ CASEOPEN,
+};
+
+struct eio_key {
+ enum _sen_type type;
+ u8 chan;
+ u8 item;
+ u8 label_idx;
+};
+
+struct eio_attr {
+ struct sensor_device_attribute sda;
+ struct eio_key key;
+};
+
+static struct {
+ u8 cmd;
+ u8 max;
+ signed int shift;
+ char name[32];
+ u8 ctrl[16];
+ u16 multi[16];
+ char item[16][32];
+ char labels[32][32];
+
+} sen_info[] = {
+ { 0x00, 0, 0, "none" },
+ { 0x12, 8, 0, "in",
+ { 0xFF, 0x10, 0x11, 0x12 },
+ { 1, 10, 10, 10 },
+ { "label", "input", "max", "min" },
+ { "5V", "5Vs5", "12V", "12Vs5",
+ "3V3", "3V3", "5Vsb", "3Vsb",
+ "Vcmos", "Vbat", "Vdc", "Vstb",
+ "Vcore_a", "Vcore_b", "", "",
+ "Voem0", "Voem1", "Voem2", "Voem3"
+ },
+ },
+ { 0x1a, 2, 0, "curr",
+ { 0xFF, 0x10, 0x11, 0x12 },
+ { 1, 10, 10, 10 },
+ { "label", "input", "max", "min" },
+ { "dc", "oem0" },
+ },
+ { 0x10, 4, -2731, "temp",
+ { 0xFF, 0x10, 0x11, 0x12, 0x21, 0x41 },
+ { 1, 100, 100, 100, 100, 100 },
+ { "label", "input", "max", "min", "crit", "emergency" },
+ { "cpu0", "cpu1", "cpu2", "cpu3",
+ "sys0", "sys1", "sys2", "sys3",
+ "aux0", "aux1", "aux2", "aux3",
+ "dimm0", "dimm1", "dimm2", "dimm3",
+ "pch", "gpu", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "oem0", "oem1", "oem", "oem3" },
+ },
+ { 0x14, 0, 0, "pwm",
+ { 0xFF, 0x11, 0x12 },
+ { 1, 1, 1 },
+ { "label", "polarity", "freq" },
+ { "pwm0", "pwm0", "pwm0", "pwm0" },
+ },
+ { 0x16, 2, 0, "tacho",
+ { 0xFF, 0x10 },
+ { 1, 1 },
+ { "label", "input"},
+ { "cpu0", "cpu1", "cpu2", "cpu3",
+ "sys0", "sys1", "sys2", "sys3",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "",
+ "oem0", "oem1", "oem2", "oem3"
+ },
+ },
+ { 0x24, 4, 0, "fan",
+ { 0xFF, 0x1A },
+ { 1, 1 },
+ { "label", "input"},
+ { "cpu0", "cpu1", "cpu2", "cpu3",
+ "sys0", "sys1", "sys2", "sys3",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "",
+ "oem0", "oem1", "oem2", "oem3",
+ },
+ },
+ { 0x28, 1, 0, "intrusion",
+ { 0xFF, 0x02 },
+ { 1, 1 },
+ { "label", "input" },
+ { "case_open" }
+ }
+};
+
+static struct {
+ enum _sen_type type;
+ u8 ctrl;
+ int size;
+ bool write;
+
+} ctrl_para[] = {
+ { NONE, 0x00, 0, false },
+
+ { VOLTAGE, 0x00, 1, false }, { VOLTAGE, 0x01, 1, false },
+ { VOLTAGE, 0x10, 2, false }, { VOLTAGE, 0x11, 2, false },
+ { VOLTAGE, 0x12, 2, false },
+
+ { CURRENT, 0x00, 1, false }, { CURRENT, 0x01, 1, false },
+ { CURRENT, 0x10, 2, false }, { CURRENT, 0x11, 2, false },
+ { CURRENT, 0x12, 2, false },
+
+ { TEMP, 0x00, 2, false }, { TEMP, 0x01, 1, false },
+ { TEMP, 0x04, 1, false }, { TEMP, 0x10, 2, false },
+ { TEMP, 0x11, 2, false }, { TEMP, 0x12, 2, false },
+ { TEMP, 0x21, 2, false }, { TEMP, 0x41, 2, false },
+
+ { PWM, 0x00, 1, false }, { PWM, 0x10, 1, true },
+ { PWM, 0x11, 1, true }, { PWM, 0x12, 4, true },
+
+ { TACHO, 0x00, 1, false }, { TACHO, 0x01, 1, false },
+ { TACHO, 0x10, 4, true },
+
+ { FAN, 0x00, 1, false }, { FAN, 0x01, 1, false },
+ { FAN, 0x03, 1, true }, { FAN, 0x1A, 2, false },
+
+ { CASEOPEN, 0x00, 1, false }, { CASEOPEN, 0x02, 1, true },
+};
+
+static int para_idx(enum _sen_type type, u8 ctrl)
+{
+ int i;
+
+ for (i = 1 ; i < ARRAY_SIZE(ctrl_para) ; i++)
+ if (type == ctrl_para[i].type &&
+ ctrl == ctrl_para[i].ctrl)
+ return i;
+
+ return 0;
+}
+
+static int pmc_read(struct device *mfd, enum _sen_type type, u8 dev_id, u8 ctrl, void *data)
+{
+ int idx = para_idx(type, ctrl);
+ int ret = 0;
+
+ if (idx == 0)
+ return -EINVAL;
+
+ if (WARN_ON(!data))
+ return -EINVAL;
+
+ struct pmc_op op = {
+ .cmd = sen_info[type].cmd | EIO_FLAG_PMC_READ,
+ .control = ctrl,
+ .device_id = dev_id,
+ .size = ctrl_para[idx].size,
+ .payload = (u8 *)data,
+ .timeout = timeout,
+ };
+
+ ret = eio_core_pmc_operation(mfd, &op);
+ return ret;
+}
+
+static ssize_t eio_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct eio_hwmon_dev *eio_hwmon = dev_get_drvdata(dev);
+ struct eio_attr *eio_attr =
+ container_of(attr, struct eio_attr, sda.dev_attr);
+ const struct eio_key *eio_key = &eio_attr->key;
+ int ret;
+ u8 data[2];
+ u32 temp_val;
+ signed int final_val;
+
+ switch (eio_key->item) {
+ case 0:
+ return sysfs_emit(buf, "%s\n",
+ sen_info[eio_key->type].labels[eio_key->label_idx]);
+
+ default:
+ ret = pmc_read(eio_hwmon->mfd, eio_key->type, eio_key->chan,
+ sen_info[eio_key->type].ctrl[eio_key->item],
+ &data);
+ if (ret)
+ return ret;
+
+ temp_val = data[0] | data[1] << 8;
+
+ final_val = (signed int)temp_val + (signed int)(sen_info[eio_key->type].shift);
+ final_val = final_val * (signed int)sen_info[eio_key->type].multi[eio_key->item];
+
+ return sysfs_emit(buf, "%d\n", final_val);
+ }
+
+ return -EINVAL;
+}
+
+static char devname[MAX_DEV][MAX_NAME];
+static struct eio_attr devattrs[MAX_DEV];
+static struct attribute *attrs[MAX_DEV];
+
+static struct attribute_group group = {
+ .attrs = attrs,
+};
+
+static const struct attribute_group *groups[] = {
+ &group,
+ NULL
+};
+
+static int hwmon_init(struct device *mfd, struct eio_hwmon_dev *eio_hwmon)
+{
+ enum _sen_type type;
+ u8 i, j, data[16];
+ int sum = 0;
+ int ret;
+
+ for (type = VOLTAGE ; type <= CASEOPEN ; type++) {
+ int cnt = 1;
+
+ for (i = 0 ; i < sen_info[type].max ; i++) {
+ if (pmc_read(mfd, type, i, 0x00, data) ||
+ (data[0] & 0x01) == 0)
+ continue;
+
+ memset(data, 0, sizeof(data));
+ ret = pmc_read(mfd, type, i, 0x01, data);
+ if (ret != 0 && ret != -EINVAL) {
+ dev_info(mfd, "read type id error\n");
+ continue;
+ }
+
+ for (j = 0 ; j < ARRAY_SIZE(sen_info->item) ; j++) {
+ struct eio_attr *eio_attr;
+
+ if (sen_info[type].item[j][0] == 0)
+ continue;
+
+ eio_attr = &devattrs[sum];
+
+ eio_attr->key.type = type;
+ eio_attr->key.chan = i;
+ eio_attr->key.item = j;
+ eio_attr->key.label_idx = data[0];
+
+ snprintf(devname[sum], sizeof(devname[sum]),
+ "%s%d_%s", sen_info[type].name, cnt,
+ sen_info[type].item[j]);
+
+ eio_attr->sda.dev_attr.attr.name = devname[sum];
+ eio_attr->sda.dev_attr.attr.mode = 0444;
+ eio_attr->sda.dev_attr.show = eio_show;
+
+ attrs[sum] = &eio_attr->sda.dev_attr.attr;
+
+ if (++sum >= MAX_DEV)
+ break;
+ }
+ cnt++;
+ }
+ }
+
+ return sum;
+}
+
+static int hwmon_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct eio_hwmon_dev *eio_hwmon;
+ struct eio_dev *eio_dev = dev_get_drvdata(dev->parent);
+ struct device *hwmon;
+
+ if (!eio_dev) {
+ dev_err(dev, "Error contact eio_core\n");
+ return -ENODEV;
+ }
+
+ eio_hwmon = devm_kzalloc(dev, sizeof(*eio_hwmon), GFP_KERNEL);
+ if (!eio_hwmon)
+ return -ENOMEM;
+
+ eio_hwmon->mfd = dev->parent;
+ platform_set_drvdata(pdev, eio_hwmon);
+
+ if (hwmon_init(dev->parent, eio_hwmon) <= 0)
+ return -ENODEV;
+
+ hwmon = devm_hwmon_device_register_with_groups(dev, KBUILD_MODNAME,
+ eio_hwmon,
+ groups);
+ return PTR_ERR_OR_ZERO(hwmon);
+}
+
+static struct platform_driver eio_hwmon_driver = {
+ .probe = hwmon_probe,
+ .driver = {
+ .name = "eio_hwmon",
+ },
+};
+
+module_platform_driver(eio_hwmon_driver);
+
+MODULE_AUTHOR("Wenkai Chung <wenkai.chung@advantech.com.tw>");
+MODULE_AUTHOR("Ramiro Oliveira <ramiro.oliveira@advantech.com>");
+MODULE_DESCRIPTION("Hardware monitor driver for Advantech EIO embedded controller");
+MODULE_LICENSE("GPL");
+
--
2.43.0On Fri, Dec 12, 2025 at 05:40:54PM +0100, Ramiro Oliveira wrote:
> This driver controls the Hardware Monitor block of the Advantech EIO chip.
>
> Signed-off-by: Ramiro Oliveira <ramiro.oliveira@advantech.com>
> ---
> MAINTAINERS | 1 +
> drivers/hwmon/Kconfig | 10 ++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/eio-hwmon.c | 344 ++++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 356 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 359d4a13f212..fdd39b152f41 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -620,6 +620,7 @@ ADVANTECH EIO DRIVER
> M: Ramiro Oliveira <ramiro.oliveira@advantech.com>
> S: Maintained
> F: drivers/gpio/gpio-eio.c
> +F: drivers/hwmon/eio-hwmon.c
> F: drivers/mfd/eio_core.c
> F: include/linux/mfd/eio.h
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 157678b821fc..08993b993596 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -2043,6 +2043,16 @@ config SENSORS_DME1737
> This driver can also be built as a module. If so, the module
> will be called dme1737.
>
> +config SENSORS_EIO
> + tristate "Advantech EIO HWMON"
> + depends on MFD_EIO
> + help
> + If you say yes here you get support for the Advantech EIO
> + temperature, voltage and fan speed monitoring block.
> +
> + This driver can also be built as a module. If so, the module
> + will be called eio-hwmon
> +
> config SENSORS_EMC1403
> tristate "SMSC EMC1403/23 thermal sensor"
> depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index eade8e3b1bde..e69f03b41fae 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -72,6 +72,7 @@ obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
> obj-$(CONFIG_SENSORS_DRIVETEMP) += drivetemp.o
> obj-$(CONFIG_SENSORS_DS620) += ds620.o
> obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
> +obj-$(CONFIG_SENSORS_EIO) += eio-hwmon.o
> obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
> obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
> obj-$(CONFIG_SENSORS_EMC2305) += emc2305.o
> diff --git a/drivers/hwmon/eio-hwmon.c b/drivers/hwmon/eio-hwmon.c
> new file mode 100644
> index 000000000000..164591aa31a7
> --- /dev/null
> +++ b/drivers/hwmon/eio-hwmon.c
> @@ -0,0 +1,344 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * GPIO driver for Advantech EIO embedded controller.
> + *
> + * Copyright (C) 2025 Advantech Corporation. All rights reserved.
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/eio.h>
> +#include <linux/module.h>
> +
> +#define MAX_DEV 128
> +#define MAX_NAME 32
> +
> +static uint timeout;
> +module_param(timeout, uint, 0444);
> +MODULE_PARM_DESC(timeout,
> + "Default pmc command timeout in micro-seconds.\n");
> +
It does not make sense to me to have this as module parameter for each of
the drivers.
> +struct eio_hwmon_dev {
> + struct device *mfd;
> +};
> +
> +enum _sen_type {
> + NONE,
> + VOLTAGE,
> + CURRENT,
> + TEMP,
> + PWM,
> + TACHO,
> + FAN,
> + CASEOPEN,
> +};
> +
> +struct eio_key {
> + enum _sen_type type;
> + u8 chan;
> + u8 item;
> + u8 label_idx;
> +};
> +
> +struct eio_attr {
> + struct sensor_device_attribute sda;
> + struct eio_key key;
> +};
> +
> +static struct {
> + u8 cmd;
> + u8 max;
> + signed int shift;
> + char name[32];
> + u8 ctrl[16];
> + u16 multi[16];
> + char item[16][32];
> + char labels[32][32];
> +
> +} sen_info[] = {
> + { 0x00, 0, 0, "none" },
> + { 0x12, 8, 0, "in",
> + { 0xFF, 0x10, 0x11, 0x12 },
> + { 1, 10, 10, 10 },
> + { "label", "input", "max", "min" },
> + { "5V", "5Vs5", "12V", "12Vs5",
> + "3V3", "3V3", "5Vsb", "3Vsb",
> + "Vcmos", "Vbat", "Vdc", "Vstb",
> + "Vcore_a", "Vcore_b", "", "",
> + "Voem0", "Voem1", "Voem2", "Voem3"
> + },
> + },
> + { 0x1a, 2, 0, "curr",
> + { 0xFF, 0x10, 0x11, 0x12 },
> + { 1, 10, 10, 10 },
> + { "label", "input", "max", "min" },
> + { "dc", "oem0" },
> + },
> + { 0x10, 4, -2731, "temp",
> + { 0xFF, 0x10, 0x11, 0x12, 0x21, 0x41 },
> + { 1, 100, 100, 100, 100, 100 },
> + { "label", "input", "max", "min", "crit", "emergency" },
> + { "cpu0", "cpu1", "cpu2", "cpu3",
> + "sys0", "sys1", "sys2", "sys3",
> + "aux0", "aux1", "aux2", "aux3",
> + "dimm0", "dimm1", "dimm2", "dimm3",
> + "pch", "gpu", "", "",
> + "", "", "", "",
> + "", "", "", "",
> + "oem0", "oem1", "oem", "oem3" },
> + },
> + { 0x14, 0, 0, "pwm",
> + { 0xFF, 0x11, 0x12 },
> + { 1, 1, 1 },
> + { "label", "polarity", "freq" },
> + { "pwm0", "pwm0", "pwm0", "pwm0" },
> + },
> + { 0x16, 2, 0, "tacho",
> + { 0xFF, 0x10 },
> + { 1, 1 },
> + { "label", "input"},
> + { "cpu0", "cpu1", "cpu2", "cpu3",
> + "sys0", "sys1", "sys2", "sys3",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "",
> + "oem0", "oem1", "oem2", "oem3"
> + },
> + },
> + { 0x24, 4, 0, "fan",
> + { 0xFF, 0x1A },
> + { 1, 1 },
> + { "label", "input"},
> + { "cpu0", "cpu1", "cpu2", "cpu3",
> + "sys0", "sys1", "sys2", "sys3",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "",
> + "oem0", "oem1", "oem2", "oem3",
> + },
> + },
> + { 0x28, 1, 0, "intrusion",
> + { 0xFF, 0x02 },
> + { 1, 1 },
> + { "label", "input" },
> + { "case_open" }
> + }
> +};
> +
> +static struct {
> + enum _sen_type type;
> + u8 ctrl;
> + int size;
> + bool write;
> +
> +} ctrl_para[] = {
> + { NONE, 0x00, 0, false },
> +
> + { VOLTAGE, 0x00, 1, false }, { VOLTAGE, 0x01, 1, false },
> + { VOLTAGE, 0x10, 2, false }, { VOLTAGE, 0x11, 2, false },
> + { VOLTAGE, 0x12, 2, false },
> +
> + { CURRENT, 0x00, 1, false }, { CURRENT, 0x01, 1, false },
> + { CURRENT, 0x10, 2, false }, { CURRENT, 0x11, 2, false },
> + { CURRENT, 0x12, 2, false },
> +
> + { TEMP, 0x00, 2, false }, { TEMP, 0x01, 1, false },
> + { TEMP, 0x04, 1, false }, { TEMP, 0x10, 2, false },
> + { TEMP, 0x11, 2, false }, { TEMP, 0x12, 2, false },
> + { TEMP, 0x21, 2, false }, { TEMP, 0x41, 2, false },
> +
> + { PWM, 0x00, 1, false }, { PWM, 0x10, 1, true },
> + { PWM, 0x11, 1, true }, { PWM, 0x12, 4, true },
> +
> + { TACHO, 0x00, 1, false }, { TACHO, 0x01, 1, false },
> + { TACHO, 0x10, 4, true },
> +
> + { FAN, 0x00, 1, false }, { FAN, 0x01, 1, false },
> + { FAN, 0x03, 1, true }, { FAN, 0x1A, 2, false },
> +
> + { CASEOPEN, 0x00, 1, false }, { CASEOPEN, 0x02, 1, true },
> +};
> +
> +static int para_idx(enum _sen_type type, u8 ctrl)
> +{
> + int i;
> +
> + for (i = 1 ; i < ARRAY_SIZE(ctrl_para) ; i++)
> + if (type == ctrl_para[i].type &&
> + ctrl == ctrl_para[i].ctrl)
> + return i;
> +
> + return 0;
> +}
> +
> +static int pmc_read(struct device *mfd, enum _sen_type type, u8 dev_id, u8 ctrl, void *data)
> +{
> + int idx = para_idx(type, ctrl);
> + int ret = 0;
> +
> + if (idx == 0)
> + return -EINVAL;
> +
> + if (WARN_ON(!data))
> + return -EINVAL;
> +
> + struct pmc_op op = {
> + .cmd = sen_info[type].cmd | EIO_FLAG_PMC_READ,
> + .control = ctrl,
> + .device_id = dev_id,
> + .size = ctrl_para[idx].size,
> + .payload = (u8 *)data,
> + .timeout = timeout,
> + };
> +
> + ret = eio_core_pmc_operation(mfd, &op);
> + return ret;
> +}
> +
> +static ssize_t eio_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct eio_hwmon_dev *eio_hwmon = dev_get_drvdata(dev);
> + struct eio_attr *eio_attr =
> + container_of(attr, struct eio_attr, sda.dev_attr);
> + const struct eio_key *eio_key = &eio_attr->key;
> + int ret;
> + u8 data[2];
> + u32 temp_val;
> + signed int final_val;
> +
> + switch (eio_key->item) {
> + case 0:
> + return sysfs_emit(buf, "%s\n",
> + sen_info[eio_key->type].labels[eio_key->label_idx]);
> +
> + default:
> + ret = pmc_read(eio_hwmon->mfd, eio_key->type, eio_key->chan,
> + sen_info[eio_key->type].ctrl[eio_key->item],
> + &data);
> + if (ret)
> + return ret;
> +
> + temp_val = data[0] | data[1] << 8;
> +
> + final_val = (signed int)temp_val + (signed int)(sen_info[eio_key->type].shift);
> + final_val = final_val * (signed int)sen_info[eio_key->type].multi[eio_key->item];
> +
> + return sysfs_emit(buf, "%d\n", final_val);
> + }
> +
> + return -EINVAL;
> +}
> +
> +static char devname[MAX_DEV][MAX_NAME];
> +static struct eio_attr devattrs[MAX_DEV];
> +static struct attribute *attrs[MAX_DEV];
> +
> +static struct attribute_group group = {
> + .attrs = attrs,
> +};
> +
> +static const struct attribute_group *groups[] = {
> + &group,
> + NULL
> +};
> +
> +static int hwmon_init(struct device *mfd, struct eio_hwmon_dev *eio_hwmon)
> +{
> + enum _sen_type type;
> + u8 i, j, data[16];
> + int sum = 0;
> + int ret;
> +
> + for (type = VOLTAGE ; type <= CASEOPEN ; type++) {
> + int cnt = 1;
> +
> + for (i = 0 ; i < sen_info[type].max ; i++) {
> + if (pmc_read(mfd, type, i, 0x00, data) ||
> + (data[0] & 0x01) == 0)
> + continue;
> +
> + memset(data, 0, sizeof(data));
> + ret = pmc_read(mfd, type, i, 0x01, data);
> + if (ret != 0 && ret != -EINVAL) {
> + dev_info(mfd, "read type id error\n");
> + continue;
> + }
> +
> + for (j = 0 ; j < ARRAY_SIZE(sen_info->item) ; j++) {
> + struct eio_attr *eio_attr;
> +
> + if (sen_info[type].item[j][0] == 0)
> + continue;
> +
> + eio_attr = &devattrs[sum];
> +
> + eio_attr->key.type = type;
> + eio_attr->key.chan = i;
> + eio_attr->key.item = j;
> + eio_attr->key.label_idx = data[0];
> +
> + snprintf(devname[sum], sizeof(devname[sum]),
> + "%s%d_%s", sen_info[type].name, cnt,
> + sen_info[type].item[j]);
> +
> + eio_attr->sda.dev_attr.attr.name = devname[sum];
> + eio_attr->sda.dev_attr.attr.mode = 0444;
> + eio_attr->sda.dev_attr.show = eio_show;
> +
> + attrs[sum] = &eio_attr->sda.dev_attr.attr;
> +
> + if (++sum >= MAX_DEV)
> + break;
> + }
> + cnt++;
> + }
> + }
> +
> + return sum;
> +}
> +
> +static int hwmon_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct eio_hwmon_dev *eio_hwmon;
> + struct eio_dev *eio_dev = dev_get_drvdata(dev->parent);
> + struct device *hwmon;
> +
> + if (!eio_dev) {
> + dev_err(dev, "Error contact eio_core\n");
> + return -ENODEV;
> + }
> +
> + eio_hwmon = devm_kzalloc(dev, sizeof(*eio_hwmon), GFP_KERNEL);
> + if (!eio_hwmon)
> + return -ENOMEM;
> +
> + eio_hwmon->mfd = dev->parent;
> + platform_set_drvdata(pdev, eio_hwmon);
> +
> + if (hwmon_init(dev->parent, eio_hwmon) <= 0)
> + return -ENODEV;
> +
> + hwmon = devm_hwmon_device_register_with_groups(dev, KBUILD_MODNAME,
> + eio_hwmon,
> + groups);
This API is deprecated. Please rework to use
devm_hwmon_device_register_with_info().
Also, it is highly unusual to have both a hardware monitoring driver
and a thermal driver (instead of instantiating the thermal device
from the hardware monitoring driver). This warrants a detailed
explanation.
Thanks,
Guenter
> + return PTR_ERR_OR_ZERO(hwmon);
> +}
> +
> +static struct platform_driver eio_hwmon_driver = {
> + .probe = hwmon_probe,
> + .driver = {
> + .name = "eio_hwmon",
> + },
> +};
> +
> +module_platform_driver(eio_hwmon_driver);
> +
> +MODULE_AUTHOR("Wenkai Chung <wenkai.chung@advantech.com.tw>");
> +MODULE_AUTHOR("Ramiro Oliveira <ramiro.oliveira@advantech.com>");
> +MODULE_DESCRIPTION("Hardware monitor driver for Advantech EIO embedded controller");
> +MODULE_LICENSE("GPL");
> +
>
> --
> 2.43.0
>
>
© 2016 - 2025 Red Hat, Inc.