From: George Moussalem <george.moussalem@outlook.com>
Enable nodes required for q6 remoteproc bring up.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 64 +++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index f024b3cba33f6100ac3f4d45598ff2356e026dcf..570899711b62bb286780f54db2461ebbc5291340 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -158,6 +158,11 @@ tz_region: tz@4ac00000 {
reg = <0x0 0x4ac00000 0x0 0x200000>;
no-map;
};
+
+ q6_region: wcss@4b000000 {
+ no-map;
+ reg = <0x0 0x4b000000 0x0 0x1b00000>;
+ };
};
soc: soc@0 {
@@ -717,6 +722,41 @@ frame@b128000 {
};
};
+ q6v5_wcss: remoteproc@cd00000 {
+ compatible = "qcom,ipq5018-wcss-sec-pil";
+ reg = <0x0cd00000 0x10000>;
+ firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mbn";
+ interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 1 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 2 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 3 IRQ_TYPE_NONE>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&gcc GCC_SLEEP_CLK_SRC>,
+ <&gcc GCC_SYS_NOC_WCSS_AHB_CLK>;
+ clock-names = "sleep",
+ "interconnect";
+
+ qcom,smem-states = <&wcss_smp2p_out 0>,
+ <&wcss_smp2p_out 1>;
+ qcom,smem-state-names = "shutdown",
+ "stop";
+
+ memory-region = <&q6_region>;
+
+ glink-edge {
+ interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+ label = "rtr";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 8>;
+ };
+ };
+
pcie1: pcie@80000000 {
compatible = "qcom,pcie-ipq5018";
reg = <0x80000000 0xf1d>,
@@ -991,4 +1031,28 @@ timer {
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+
+ wcss: smp2p-wcss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 9>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ wcss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
};
--
2.52.0