Hi
Am 06.12.25 um 21:45 schrieb Nicolas Frattaroli:
> From: Daniel Stone <daniels@collabora.com>
>
> We already clip the plane to the display bounds in atomic_check, and
> ensure that it is sufficiently sized. Instead of trying to catch this
> and adjust for it in atomic_update, just assert that atomic_check has
> done its job.
>
> Signed-off-by: Daniel Stone <daniels@collabora.com>
> Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
> ---
> drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 29 +++++++++-------------------
> 1 file changed, 9 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> index 20b49209ddcd..81b3eba07095 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> @@ -1214,28 +1214,17 @@ static void vop2_plane_atomic_update(struct drm_plane *plane,
> src_w = drm_rect_width(src) >> 16;
> src_h = drm_rect_height(src) >> 16;
> dsp_w = drm_rect_width(dest);
> -
> - if (dest->x1 + dsp_w > adjusted_mode->hdisplay) {
> - drm_dbg_kms(vop2->drm,
> - "vp%d %s dest->x1[%d] + dsp_w[%d] exceed mode hdisplay[%d]\n",
> - vp->id, win->data->name, dest->x1, dsp_w, adjusted_mode->hdisplay);
> - dsp_w = adjusted_mode->hdisplay - dest->x1;
> - if (dsp_w < 4)
> - dsp_w = 4;
> - src_w = dsp_w * src_w / drm_rect_width(dest);
> - }
> -
> dsp_h = drm_rect_height(dest);
>
> - if (dest->y1 + dsp_h > adjusted_mode->vdisplay) {
> - drm_dbg_kms(vop2->drm,
> - "vp%d %s dest->y1[%d] + dsp_h[%d] exceed mode vdisplay[%d]\n",
> - vp->id, win->data->name, dest->y1, dsp_h, adjusted_mode->vdisplay);
> - dsp_h = adjusted_mode->vdisplay - dest->y1;
> - if (dsp_h < 4)
> - dsp_h = 4;
> - src_h = dsp_h * src_h / drm_rect_height(dest);
> - }
> + /* drm_atomic_helper_check_plane_state calls drm_rect_clip_scaled for
> + * us, which keeps our planes bounded within the CRTC active area
> + */
> + WARN_ON(dest->x1 + dsp_w > adjusted_mode->hdisplay);
> + WARN_ON(dest->y1 + dsp_h > adjusted_mode->vdisplay);
> + WARN_ON(dsp_w < 4);
> + WARN_ON(dsp_h < 4);
> + WARN_ON(src_w < 4);
> + WARN_ON(src_h < 4);
This should also use drm_WARN_ON(). But maybe rather leave it out
entirely? I don't remember having seen other drivers to re-test in
atomic_update.
Best regards
Thomas
>
> /*
> * This is workaround solution for IC design:
>
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Jochen Jaser, Andrew McDonald, Werner Knoblich, (HRB 36809, AG Nürnberg)