The description of the BITRATE variable is not correctly aligned with the
other ones. Put it on a new line with the same indentation as the other
variables.
This done, reindent everything to only one tabulation (was one tabulation
and two spaces before).
Before this patch...:
$ ip link help can
Usage: ip link set DEVICE type can
(...)
Where: BITRATE := { NUMBER in bps }
SAMPLE-POINT := { 0.000..0.999 }
TQ := { NUMBER in ns }
PROP-SEG := { NUMBER in tq }
PHASE-SEG1 := { NUMBER in tq }
PHASE-SEG2 := { NUMBER in tq }
SJW := { NUMBER in tq }
TDCV := { NUMBER in tc }
TDCO := { NUMBER in tc }
TDCF := { NUMBER in tc }
RESTART-MS := { 0 | NUMBER in ms }
...and after:
$ ip link help can
Usage: ip link set DEVICE type can
(...)
Where:
BITRATE := { NUMBER in bps }
SAMPLE-POINT := { 0.000..0.999 }
TQ := { NUMBER in ns }
PROP-SEG := { NUMBER in tq }
PHASE-SEG1 := { NUMBER in tq }
PHASE-SEG2 := { NUMBER in tq }
SJW := { NUMBER in tq }
TDCV := { NUMBER in tc }
TDCO := { NUMBER in tc }
TDCF := { NUMBER in tc }
RESTART-MS := { 0 | NUMBER in ms }
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
---
ip/iplink_can.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/ip/iplink_can.c b/ip/iplink_can.c
index 1afdf088..f3640fe0 100644
--- a/ip/iplink_can.c
+++ b/ip/iplink_can.c
@@ -48,17 +48,18 @@ static void print_usage(FILE *f)
"\n"
"\t[ termination { 0..65535 } ]\n"
"\n"
- "\tWhere: BITRATE := { NUMBER in bps }\n"
- "\t SAMPLE-POINT := { 0.000..0.999 }\n"
- "\t TQ := { NUMBER in ns }\n"
- "\t PROP-SEG := { NUMBER in tq }\n"
- "\t PHASE-SEG1 := { NUMBER in tq }\n"
- "\t PHASE-SEG2 := { NUMBER in tq }\n"
- "\t SJW := { NUMBER in tq }\n"
- "\t TDCV := { NUMBER in tc }\n"
- "\t TDCO := { NUMBER in tc }\n"
- "\t TDCF := { NUMBER in tc }\n"
- "\t RESTART-MS := { 0 | NUMBER in ms }\n"
+ "\tWhere:\n"
+ "\t BITRATE := { NUMBER in bps }\n"
+ "\t SAMPLE-POINT := { 0.000..0.999 }\n"
+ "\t TQ := { NUMBER in ns }\n"
+ "\t PROP-SEG := { NUMBER in tq }\n"
+ "\t PHASE-SEG1 := { NUMBER in tq }\n"
+ "\t PHASE-SEG2 := { NUMBER in tq }\n"
+ "\t SJW := { NUMBER in tq }\n"
+ "\t TDCV := { NUMBER in tc }\n"
+ "\t TDCO := { NUMBER in tc }\n"
+ "\t TDCF := { NUMBER in tc }\n"
+ "\t RESTART-MS := { 0 | NUMBER in ms }\n"
);
}
--
2.51.2