[PATCH v13 mm-new 10/16] khugepaged: add per-order mTHP collapse failure statistics

Nico Pache posted 16 patches 3 hours ago
[PATCH v13 mm-new 10/16] khugepaged: add per-order mTHP collapse failure statistics
Posted by Nico Pache 3 hours ago
Add three new mTHP statistics to track collapse failures for different
orders when encountering swap PTEs, excessive none PTEs, and shared PTEs:

- collapse_exceed_swap_pte: Increment when mTHP collapse fails due to swap
	PTEs

- collapse_exceed_none_pte: Counts when mTHP collapse fails due to
  	exceeding the none PTE threshold for the given order

- collapse_exceed_shared_pte: Counts when mTHP collapse fails due to shared
  	PTEs

These statistics complement the existing THP_SCAN_EXCEED_* events by
providing per-order granularity for mTHP collapse attempts. The stats are
exposed via sysfs under
`/sys/kernel/mm/transparent_hugepage/hugepages-*/stats/` for each
supported hugepage size.

As we currently dont support collapsing mTHPs that contain a swap or
shared entry, those statistics keep track of how often we are
encountering failed mTHP collapses due to these restrictions.

Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 Documentation/admin-guide/mm/transhuge.rst | 24 ++++++++++++++++++++++
 include/linux/huge_mm.h                    |  3 +++
 mm/huge_memory.c                           |  7 +++++++
 mm/khugepaged.c                            | 16 ++++++++++++---
 4 files changed, 47 insertions(+), 3 deletions(-)

diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
index c51932e6275d..d396d1bfb274 100644
--- a/Documentation/admin-guide/mm/transhuge.rst
+++ b/Documentation/admin-guide/mm/transhuge.rst
@@ -714,6 +714,30 @@ nr_anon_partially_mapped
        an anonymous THP as "partially mapped" and count it here, even though it
        is not actually partially mapped anymore.
 
+collapse_exceed_none_pte
+       The number of collapse attempts that failed due to exceeding the
+       max_ptes_none threshold. For mTHP collapse, Currently only max_ptes_none
+       values of 0 and (HPAGE_PMD_NR - 1) are supported. Any other value will
+       emit a warning and no mTHP collapse will be attempted. khugepaged will
+       try to collapse to the largest enabled (m)THP size, if it fails, it will
+       try the next lower enabled mTHP size. This counter records the number of
+       times a collapse attempt was skipped for exceeding the max_ptes_none
+       threshold, and khugepaged will move on to the next available mTHP size.
+
+collapse_exceed_swap_pte
+       The number of anonymous mTHP pte ranges which were unable to collapse due
+       to containing at least one swap PTE. Currently khugepaged does not
+       support collapsing mTHP regions that contain a swap PTE. This counter can
+       be used to monitor the number of khugepaged mTHP collapses that failed
+       due to the presence of a swap PTE.
+
+collapse_exceed_shared_pte
+       The number of anonymous mTHP pte ranges which were unable to collapse due
+       to containing at least one shared PTE. Currently khugepaged does not
+       support collapsing mTHP pte ranges that contain a shared PTE. This
+       counter can be used to monitor the number of khugepaged mTHP collapses
+       that failed due to the presence of a shared PTE.
+
 As the system ages, allocating huge pages may be expensive as the
 system uses memory compaction to copy data around memory to free a
 huge page for use. There are some counters in ``/proc/vmstat`` to help
diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
index f93365e182b4..1082b78e794d 100644
--- a/include/linux/huge_mm.h
+++ b/include/linux/huge_mm.h
@@ -144,6 +144,9 @@ enum mthp_stat_item {
 	MTHP_STAT_SPLIT_DEFERRED,
 	MTHP_STAT_NR_ANON,
 	MTHP_STAT_NR_ANON_PARTIALLY_MAPPED,
+	MTHP_STAT_COLLAPSE_EXCEED_SWAP,
+	MTHP_STAT_COLLAPSE_EXCEED_NONE,
+	MTHP_STAT_COLLAPSE_EXCEED_SHARED,
 	__MTHP_STAT_COUNT
 };
 
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index c1e1e91b0e61..b4d9b3ac9a7c 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -639,6 +639,10 @@ DEFINE_MTHP_STAT_ATTR(split_failed, MTHP_STAT_SPLIT_FAILED);
 DEFINE_MTHP_STAT_ATTR(split_deferred, MTHP_STAT_SPLIT_DEFERRED);
 DEFINE_MTHP_STAT_ATTR(nr_anon, MTHP_STAT_NR_ANON);
 DEFINE_MTHP_STAT_ATTR(nr_anon_partially_mapped, MTHP_STAT_NR_ANON_PARTIALLY_MAPPED);
+DEFINE_MTHP_STAT_ATTR(collapse_exceed_swap_pte, MTHP_STAT_COLLAPSE_EXCEED_SWAP);
+DEFINE_MTHP_STAT_ATTR(collapse_exceed_none_pte, MTHP_STAT_COLLAPSE_EXCEED_NONE);
+DEFINE_MTHP_STAT_ATTR(collapse_exceed_shared_pte, MTHP_STAT_COLLAPSE_EXCEED_SHARED);
+
 
 static struct attribute *anon_stats_attrs[] = {
 	&anon_fault_alloc_attr.attr,
@@ -655,6 +659,9 @@ static struct attribute *anon_stats_attrs[] = {
 	&split_deferred_attr.attr,
 	&nr_anon_attr.attr,
 	&nr_anon_partially_mapped_attr.attr,
+	&collapse_exceed_swap_pte_attr.attr,
+	&collapse_exceed_none_pte_attr.attr,
+	&collapse_exceed_shared_pte_attr.attr,
 	NULL,
 };
 
diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index b2ea56c9bb42..efb8a47af65a 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -604,7 +604,9 @@ static int __collapse_huge_page_isolate(struct vm_area_struct *vma,
 				continue;
 			} else {
 				result = SCAN_EXCEED_NONE_PTE;
-				count_vm_event(THP_SCAN_EXCEED_NONE_PTE);
+				if (!is_mthp_order(order))
+					count_vm_event(THP_SCAN_EXCEED_NONE_PTE);
+				count_mthp_stat(order, MTHP_STAT_COLLAPSE_EXCEED_NONE);
 				goto out;
 			}
 		}
@@ -634,10 +636,17 @@ static int __collapse_huge_page_isolate(struct vm_area_struct *vma,
 			 * shared may cause a future higher order collapse on a
 			 * rescan of the same range.
 			 */
-			if (is_mthp_order(order) || (cc->is_khugepaged &&
-			    shared > khugepaged_max_ptes_shared)) {
+			if (is_mthp_order(order)) {
+				result = SCAN_EXCEED_SHARED_PTE;
+				count_mthp_stat(order, MTHP_STAT_COLLAPSE_EXCEED_SHARED);
+				goto out;
+			}
+
+			if (cc->is_khugepaged &&
+			    shared > khugepaged_max_ptes_shared) {
 				result = SCAN_EXCEED_SHARED_PTE;
 				count_vm_event(THP_SCAN_EXCEED_SHARED_PTE);
+				count_mthp_stat(order, MTHP_STAT_COLLAPSE_EXCEED_SHARED);
 				goto out;
 			}
 		}
@@ -1086,6 +1095,7 @@ static int __collapse_huge_page_swapin(struct mm_struct *mm,
 		 * range.
 		 */
 		if (is_mthp_order(order)) {
+			count_mthp_stat(order, MTHP_STAT_COLLAPSE_EXCEED_SWAP);
 			pte_unmap(pte);
 			mmap_read_unlock(mm);
 			result = SCAN_EXCEED_SWAP_PTE;
-- 
2.51.1
Re: [PATCH v13 mm-new 10/16] khugepaged: add per-order mTHP collapse failure statistics
Posted by Randy Dunlap 2 hours ago

On 12/1/25 9:46 AM, Nico Pache wrote:
> Add three new mTHP statistics to track collapse failures for different
> orders when encountering swap PTEs, excessive none PTEs, and shared PTEs:
> 
> - collapse_exceed_swap_pte: Increment when mTHP collapse fails due to swap
> 	PTEs
> 
> - collapse_exceed_none_pte: Counts when mTHP collapse fails due to
>   	exceeding the none PTE threshold for the given order
> 
> - collapse_exceed_shared_pte: Counts when mTHP collapse fails due to shared
>   	PTEs
> 
> These statistics complement the existing THP_SCAN_EXCEED_* events by
> providing per-order granularity for mTHP collapse attempts. The stats are
> exposed via sysfs under
> `/sys/kernel/mm/transparent_hugepage/hugepages-*/stats/` for each
> supported hugepage size.
> 
> As we currently dont support collapsing mTHPs that contain a swap or
> shared entry, those statistics keep track of how often we are
> encountering failed mTHP collapses due to these restrictions.
> 
> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
> Signed-off-by: Nico Pache <npache@redhat.com>
> ---
>  Documentation/admin-guide/mm/transhuge.rst | 24 ++++++++++++++++++++++
>  include/linux/huge_mm.h                    |  3 +++
>  mm/huge_memory.c                           |  7 +++++++
>  mm/khugepaged.c                            | 16 ++++++++++++---
>  4 files changed, 47 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
> index c51932e6275d..d396d1bfb274 100644
> --- a/Documentation/admin-guide/mm/transhuge.rst
> +++ b/Documentation/admin-guide/mm/transhuge.rst
> @@ -714,6 +714,30 @@ nr_anon_partially_mapped
>         an anonymous THP as "partially mapped" and count it here, even though it
>         is not actually partially mapped anymore.
>  
> +collapse_exceed_none_pte
> +       The number of collapse attempts that failed due to exceeding the
> +       max_ptes_none threshold. For mTHP collapse, Currently only max_ptes_none

	                                              currently

> +       values of 0 and (HPAGE_PMD_NR - 1) are supported. Any other value will
> +       emit a warning and no mTHP collapse will be attempted. khugepaged will
> +       try to collapse to the largest enabled (m)THP size, if it fails, it will

	                                                size. If
or
	                                                size; if

> +       try the next lower enabled mTHP size. This counter records the number of
> +       times a collapse attempt was skipped for exceeding the max_ptes_none
> +       threshold, and khugepaged will move on to the next available mTHP size.
> +
> +collapse_exceed_swap_pte
> +       The number of anonymous mTHP pte ranges which were unable to collapse due

	                               PTE

> +       to containing at least one swap PTE. Currently khugepaged does not
> +       support collapsing mTHP regions that contain a swap PTE. This counter can
> +       be used to monitor the number of khugepaged mTHP collapses that failed
> +       due to the presence of a swap PTE.
> +
> +collapse_exceed_shared_pte
> +       The number of anonymous mTHP pte ranges which were unable to collapse due

	                               PTE

> +       to containing at least one shared PTE. Currently khugepaged does not
> +       support collapsing mTHP pte ranges that contain a shared PTE. This

	                          PTE

> +       counter can be used to monitor the number of khugepaged mTHP collapses
> +       that failed due to the presence of a shared PTE.
> +
>  As the system ages, allocating huge pages may be expensive as the
>  system uses memory compaction to copy data around memory to free a
>  huge page for use. There are some counters in ``/proc/vmstat`` to help


-- 
~Randy