In preparation for implementing DMA support, set MUST_RX and MUST_TX
flags on the controller so that we always receive non-NULL buffers.

The PIO mode already handles this manually by checking if rx_buf/tx_buf
are set on the transfer, and doing a dummy read/write if not.

DMA will not be able to implement this special handling, and although
the SPI controller advertises support for transmit-only or receive-only
transfers via SPCR's register TXMD bitfield, it does not seem to work.

Remove the special handling for PIO and let the SPI controller core
handle it.

Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
---
 drivers/spi/spi-rzv2h-rspi.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-rzv2h-rspi.c b/drivers/spi/spi-rzv2h-rspi.c
index 50fd7ddef58d..f0bbbd21c763 100644
--- a/drivers/spi/spi-rzv2h-rspi.c
+++ b/drivers/spi/spi-rzv2h-rspi.c
@@ -113,11 +113,7 @@ struct rzv2h_rspi_priv {
 static inline void rzv2h_rspi_tx_##type(struct rzv2h_rspi_priv *rspi,	\
 					const void *txbuf,		\
 					unsigned int index) {		\
-	type buf = 0;							\
-									\
-	if (txbuf)							\
-		buf = ((type *)txbuf)[index];				\
-									\
+	type buf = ((type *)txbuf)[index];				\
 	func(buf, rspi->base + RSPI_SPDR);				\
 }
 
@@ -126,9 +122,7 @@ static inline void rzv2h_rspi_rx_##type(struct rzv2h_rspi_priv *rspi,	\
 					void *rxbuf,			\
 					unsigned int index) {		\
 	type buf = func(rspi->base + RSPI_SPDR);			\
-									\
-	if (rxbuf)							\
-		((type *)rxbuf)[index] = buf;				\
+	((type *)rxbuf)[index] = buf;					\
 }
 
 RZV2H_RSPI_TX(writel, u32)
@@ -596,6 +590,7 @@ static int rzv2h_rspi_probe(struct platform_device *pdev)
 
 	controller->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH |
 				SPI_LSB_FIRST | SPI_LOOP;
+	controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
 	controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
 	controller->prepare_message = rzv2h_rspi_prepare_message;
 	controller->unprepare_message = rzv2h_rspi_unprepare_message;
-- 
2.52.0