The MangoPi M28K is a development board with the
Rockchip RK3528 SoC. It has the following features:
- 2x USB 2.0
- 1x mini-HDMI
- 1/2/4GB LPDDR4
- AIC8800 WiFi/BT
- MicroSD card slot
- Optional 16/32GB eMMC
- 1x 1GbE RTL8111H Ethernet
- 1x 1GbE RTL8211F Ethernet
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3528-mangopi-m28k.dts | 381 ++++++++++++++++++
2 files changed, 382 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3528-mangopi-m28k.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 8ccf72c2e31e..d666ef62f5f4 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -91,6 +91,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-armsom-sige1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-hinlink-h28k.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-mangopi-m28k.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-nanopi-zero2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-mangopi-m28k.dts b/arch/arm64/boot/dts/rockchip/rk3528-mangopi-m28k.dts
new file mode 100644
index 000000000000..e99a83553910
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-mangopi-m28k.dts
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+ model = "MangoPi M28K";
+ compatible = "widora,mangopi-m28k", "rockchip,rk3528";
+
+ aliases {
+ ethernet0 = &gmac1;
+ i2c6 = &i2c6;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio0;
+ serial0 = &uart0;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_m0_ir_rx>;
+ };
+
+ keys-0 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-boot {
+ label = "BOOT";
+ linux,code = <KEY_SETUP>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ keys-1 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-recover {
+ label = "RECOVER";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan_led>, <&wan_led>, <&work_led>;
+
+ led-0 {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
+ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "netdev";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "netdev";
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ vdd_0v9: regulator-0v9-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_ddr: regulator-1v1-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_1v8: regulator-1v8-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc_3v3: regulator-3v3-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc3v3_sd: regulator-3v3-vcc-sd {
+ compatible = "regulator-fixed";
+ gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwren_l>;
+ regulator-name = "vcc3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vccio_sd: regulator-vccio-sd {
+ compatible = "regulator-gpio";
+ gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ states = <1800000 0x0>, <3300000 0x1>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vdd_arm: regulator-vdd-arm {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc_sys>;
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <746000>;
+ regulator-max-microvolt = <1201000>;
+ regulator-settling-time-up-us = <250>;
+ };
+
+ vdd_logic: regulator-vdd-logic {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc_sys>;
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <705000>;
+ regulator-max-microvolt = <1006000>;
+ regulator-settling-time-up-us = <250>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <5000000>;
+ reset-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&combphy {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_miim>,
+ <&rgmii_tx_bus2>,
+ <&rgmii_rx_bus2>,
+ <&rgmii_rgmii_clk>,
+ <&rgmii_rgmii_bus>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6m0_xfer>;
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_rstn_l>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtl8111hs_isolateb_l>;
+ reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&pinctrl {
+ gmac {
+ gmac1_rstn_l: gmac1-rstn-l {
+ rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ir {
+ pwm3_m0_ir_rx: pwm3-m0-ir-rx {
+ rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ lan_led: lan-led {
+ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wan_led: wan-led {
+ rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ work_led: work-led {
+ rockchip,pins = <4 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ rtl8111hs_isolateb_l: rtl8111hs-isolateb-l {
+ rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_pwren_l: sdmmc-pwren-l {
+ rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_reg_on_h: wifi-reg-on-h {
+ rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_wake_host_h: wifi-wake-host-h {
+ rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1m0_pins>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2m0_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0m0_xfer>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m1_ctsn>, <&uart2m1_rtsn>, <&uart2m1_xfer>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3m0_xfer>;
+ status = "disabled";
+};
--
2.25.1
© 2016 - 2025 Red Hat, Inc.