The AST2600 has one PCIe RC and add the PCIe PHY for RC.
And add pinctrl support for PCIe RC PERST#.

Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi |  5 +++
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi         | 51 +++++++++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
index e87c4b58994a..d46f2047135c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
@@ -2,6 +2,11 @@
 // Copyright 2019 IBM Corp.
 
 &pinctrl {
+	pinctrl_pcierc1_default: pcierc1-default {
+		function = "PCIERC1";
+		groups = "PCIERC1";
+	};
+
 	pinctrl_adc0_default: adc0_default {
 		function = "ADC0";
 		groups = "ADC0";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index f8662c8ac089..a525c63dac3c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -379,6 +379,57 @@ rng: hwrng@1e6e2524 {
 				quality = <100>;
 			};
 
+			pcie_phy1: phy@1e6ed200 {
+				compatible = "aspeed,ast2600-pcie-phy";
+				reg = <0x1e6ed200 0x100>;
+				#phy-cells = <0>;
+			};
+
+			pcie0: pcie@1e770000 {
+				compatible = "aspeed,ast2600-pcie";
+				device_type = "pci";
+				reg = <0x1e770000 0x100>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+
+				ranges = <0x01000000 0x0 0x00018000 0x00018000 0x0 0x00008000
+					  0x02000000 0x0 0x60000000 0x60000000 0x0 0x20000000>;
+
+				status = "disabled";
+
+				resets = <&syscon ASPEED_RESET_H2X>;
+				reset-names = "h2x";
+
+				#interrupt-cells = <1>;
+				msi-controller;
+
+				aspeed,ahbc = <&ahbc>;
+
+				interrupt-controller;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0 0>,
+						<0 0 0 2 &pcie0 1>,
+						<0 0 0 3 &pcie0 2>,
+						<0 0 0 4 &pcie0 3>;
+
+				pcie@8,0 {
+					compatible = "pciclass,0604";
+					reg = <0x00004000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					device_type = "pci";
+					resets = <&syscon ASPEED_RESET_PCIE_RC_O>;
+					reset-names = "perst";
+					clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pcierc1_default>;
+					phys = <&pcie_phy1>;
+					ranges;
+				};
+			};
+
 			gfx: display@1e6e6000 {
 				compatible = "aspeed,ast2600-gfx", "syscon";
 				reg = <0x1e6e6000 0x1000>;

-- 
2.34.1