From: Maud Spierings <maudspierings@gocontroll.com>

Add the missing backlight driver.

Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
---
 ...x8p-ml81-moduline-display-106-av101hdt-a10.dtso | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso
index e3965caca6be..0e2914861154 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso
@@ -17,6 +17,7 @@
 
 	panel {
 		compatible = "boe,av101hdt-a10";
+		backlight = <&backlight>;
 		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		pinctrl-0 = <&pinctrl_panel>;
 		pinctrl-names = "default";
@@ -40,7 +41,36 @@ reg_vbus: regulator-vbus {
 	};
 };
 
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	backlight: backlight@6f {
+		compatible = "maxim,max25014";
+		reg = <0x6f>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		maxim,iset = <7>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0 1 2>;
+			default-brightness = <50>;
+		};
+	};
+};
+
 &iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
 	pinctrl_panel: panelgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07

-- 
2.52.0