From: Maud Spierings <maudspierings@gocontroll.com>

The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.

Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.

This is a breaking change, but it is early enough that it can be
corrected without causing any issues.

Fixes: 03f07be54cdc ("arm64: dts: freescale: Add the GOcontroll Moduline Display baseboard")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
index 88ad422c2760..399230144ce3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
@@ -9,7 +9,7 @@
 #include "imx8mp-tx8p-ml81.dtsi"
 
 / {
-	compatible = "gocontroll,moduline-display", "fsl,imx8mp";
+	compatible = "gocontroll,moduline-display-106", "karo,tx8p-ml81", "fsl,imx8mp";
 	chassis-type = "embedded";
 	hardware = "Moduline Display V1.06";
 	model = "GOcontroll Moduline Display baseboard";

-- 
2.52.0