From: Maud Spierings <maudspierings@gocontroll.com>
The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.
Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.
This is a breaking change, but it is early enough that it can be
corrected without causing any issues.
Fixes: 24e67d28ef95 ("dt-bindings: arm: fsl: Add GOcontroll Moduline Display")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 21b7168d61f5..0aeac16843b5 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1105,7 +1105,6 @@ properties:
- gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board
- gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board
- gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board
- - gocontroll,moduline-display # GOcontroll Moduline Display controller
- prt,prt8ml # Protonic PRT8ML
- skov,imx8mp-skov-basic # SKOV i.MX8MP baseboard without frontplate
- skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
@@ -1163,6 +1162,14 @@ properties:
- const: engicam,icore-mx8mp # i.MX8MP Engicam i.Core MX8M Plus SoM
- const: fsl,imx8mp
+ - description: Ka-Ro TX8P-ML81 SoM based boards
+ items:
+ - enum:
+ - gocontroll,moduline-display
+ - gocontroll,moduline-display-106
+ - const: karo,tx8p-ml81
+ - const: fsl,imx8mp
+
- description: Kontron i.MX8MP OSM-S SoM based Boards
items:
- const: kontron,imx8mp-bl-osm-s # Kontron BL i.MX8MP OSM-S Board
--
2.52.0