This patch fixes multiple spelling mistakes in dl2k driver comments:

- "deivices" -> "devices"
- "Ttransmit" -> "Transmit"
- "catastronphic" -> "catastrophic"
- "Extened" -> "Extended"

Also fix incorrect unit description: `rx_timeout` uses 640ns increments,
not 64ns.
- "64ns" -> "640ns"

These are comment-only changes and do not affect runtime behavior.

Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
---
 drivers/net/ethernet/dlink/dl2k.c | 8 ++++----
 drivers/net/ethernet/dlink/dl2k.h | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index 6e4f17142519..846d58c769ea 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -41,7 +41,7 @@ module_param(tx_flow, int, 0);
 module_param(rx_flow, int, 0);
 module_param(copy_thresh, int, 0);
 module_param(rx_coalesce, int, 0);	/* Rx frame count each interrupt */
-module_param(rx_timeout, int, 0);	/* Rx DMA wait time in 64ns increments */
+module_param(rx_timeout, int, 0);  /* Rx DMA wait time in 640ns increments */
 module_param(tx_coalesce, int, 0); /* HW xmit count each TxDMAComplete */
 
 
@@ -262,7 +262,7 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
 	np->link_status = 0;
 	/* Set media and reset PHY */
 	if (np->phy_media) {
-		/* default Auto-Negotiation for fiber deivices */
+		/* default Auto-Negotiation for fiber devices */
 	 	if (np->an_enable == 2) {
 			np->an_enable = 1;
 		}
@@ -887,7 +887,7 @@ tx_error (struct net_device *dev, int tx_status)
 	frame_id = (tx_status & 0xffff0000);
 	printk (KERN_ERR "%s: Transmit error, TxStatus %4.4x, FrameId %d.\n",
 		dev->name, tx_status, frame_id);
-	/* Ttransmit Underrun */
+	/* Transmit Underrun */
 	if (tx_status & 0x10) {
 		dev->stats.tx_fifo_errors++;
 		dw16(TxStartThresh, dr16(TxStartThresh) + 0x10);
@@ -1083,7 +1083,7 @@ rio_error (struct net_device *dev, int int_status)
 		get_stats (dev);
 	}
 
-	/* PCI Error, a catastronphic error related to the bus interface
+	/* PCI Error, a catastrophic error related to the bus interface
 	   occurs, set GlobalReset and HostReset to reset. */
 	if (int_status & HostError) {
 		printk (KERN_ERR "%s: HostError! IntStatus %4.4x.\n",
diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h
index 4788cc94639d..9ebf7a6db93e 100644
--- a/drivers/net/ethernet/dlink/dl2k.h
+++ b/drivers/net/ethernet/dlink/dl2k.h
@@ -270,7 +270,7 @@ enum _pcs_reg {
 	PCS_ESR = 15,
 };
 
-/* IEEE Extened Status Register */
+/* IEEE Extended Status Register */
 enum _mii_esr {
 	MII_ESR_1000BX_FD = 0x8000,
 	MII_ESR_1000BX_HD = 0x4000,
-- 
2.52.0

On Mon, Dec 01, 2025 at 07:06:53AM +0900, Yeounsu Moon wrote:
> This patch fixes multiple spelling mistakes in dl2k driver comments:
> 
> - "deivices" -> "devices"
> - "Ttransmit" -> "Transmit"
> - "catastronphic" -> "catastrophic"
> - "Extened" -> "Extended"
> 
> Also fix incorrect unit description: `rx_timeout` uses 640ns increments,
> not 64ns.
> - "64ns" -> "640ns"
> 
> These are comment-only changes and do not affect runtime behavior.
> 
> Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew