From: Peng Fan <peng.fan@nxp.com>

Parse the Spread Spectrum Configuration(SSC) from device tree and configure
them before using the clock.

Each SSC is three u32 elements which means '<modfreq spreaddepth
modmethod>', so assigned-clock-sscs is an array of multiple three u32
elements.

Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/clk-conf.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

diff --git a/drivers/clk/clk-conf.c b/drivers/clk/clk-conf.c
index 303a0bb26e54a95655ce094a35b989c97ebc6fd8..dd6083597db3f8f27d86abf5640dfc3fb39a9b88 100644
--- a/drivers/clk/clk-conf.c
+++ b/drivers/clk/clk-conf.c
@@ -155,6 +155,71 @@ static int __set_clk_rates(struct device_node *node, bool clk_supplier)
 	return 0;
 }
 
+static int __set_clk_spread_spectrum(struct device_node *node, bool clk_supplier)
+{
+	struct clk_spread_spectrum *sscs __free(kfree) = NULL;
+	u32 elem_size = sizeof(struct clk_spread_spectrum);
+	struct of_phandle_args clkspec;
+	int rc, count, index;
+	struct clk *clk;
+
+	/* modfreq, spreadPercent, modmethod */
+	count = of_property_count_elems_of_size(node, "assigned-clock-sscs", elem_size);
+	if (count <= 0)
+		return 0;
+
+	sscs = kcalloc(count, elem_size, GFP_KERNEL);
+	if (!sscs)
+		return -ENOMEM;
+
+	rc = of_property_read_u32_array(node, "assigned-clock-sscs", (u32 *)sscs,
+					count * 3);
+	if (rc)
+		return rc;
+
+	for (index = 0; index < count; index++) {
+		struct clk_spread_spectrum *conf = &sscs[index];
+		struct clk_hw *hw;
+
+		if (!conf->modfreq_hz && !conf->spread_bp && !conf->method)
+			continue;
+
+		rc = of_parse_phandle_with_args(node, "assigned-clocks", "#clock-cells",
+						index, &clkspec);
+		if (rc < 0) {
+			/* skip empty (null) phandles */
+			if (rc == -ENOENT)
+				continue;
+			else
+				return rc;
+		}
+
+		if (clkspec.np == node && !clk_supplier) {
+			of_node_put(clkspec.np);
+			return 0;
+		}
+
+		clk = of_clk_get_from_provider(&clkspec);
+		of_node_put(clkspec.np);
+		if (IS_ERR(clk)) {
+			if (PTR_ERR(clk) != -EPROBE_DEFER)
+				pr_warn("clk: couldn't get clock %d for %pOF\n",
+					index, node);
+			return PTR_ERR(clk);
+		}
+
+		hw = __clk_get_hw(clk);
+		rc = clk_hw_set_spread_spectrum(hw, conf);
+		if (rc < 0)
+			pr_err("clk: couldn't set %s clk spread spectrum %u %u %u: %d\n",
+			       __clk_get_name(clk), conf->modfreq_hz, conf->spread_bp,
+			       conf->method, rc);
+		clk_put(clk);
+	}
+
+	return 0;
+}
+
 /**
  * of_clk_set_defaults() - parse and set assigned clocks configuration
  * @node: device node to apply clock settings for
@@ -174,6 +239,10 @@ int of_clk_set_defaults(struct device_node *node, bool clk_supplier)
 	if (!node)
 		return 0;
 
+	rc = __set_clk_spread_spectrum(node, clk_supplier);
+	if (rc < 0)
+		return rc;
+
 	rc = __set_clk_parents(node, clk_supplier);
 	if (rc < 0)
 		return rc;

-- 
2.37.1

On 28/11/2025 04:14, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Parse the Spread Spectrum Configuration(SSC) from device tree and configure
> them before using the clock.
> 
> Each SSC is three u32 elements which means '<modfreq spreaddepth
> modmethod>', so assigned-clock-sscs is an array of multiple three u32
> elements.
> 
> Reviewed-by: Brian Masney <bmasney@redhat.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/clk/clk-conf.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 69 insertions(+)
> 
> diff --git a/drivers/clk/clk-conf.c b/drivers/clk/clk-conf.c
> index 303a0bb26e54a95655ce094a35b989c97ebc6fd8..dd6083597db3f8f27d86abf5640dfc3fb39a9b88 100644
> --- a/drivers/clk/clk-conf.c
> +++ b/drivers/clk/clk-conf.c
> @@ -155,6 +155,71 @@ static int __set_clk_rates(struct device_node *node, bool clk_supplier)
>  	return 0;
>  }
>  
> +static int __set_clk_spread_spectrum(struct device_node *node, bool clk_supplier)
> +{
> +	struct clk_spread_spectrum *sscs __free(kfree) = NULL;

This is an undesired syntax explicitly documented as one to avoid. You
need here proper assignment, not NULL. Please don't use cleanup.h if you
do not intend to follow it because it does not make the code simpler.

Best regards,
Krzysztof