This allows us to define and consume them in a unified way in later
commits.

A lot of the existing code has open coded bit shifts or direct usage of
whole config values which is error prone and hides which bits are in use
and which are free.

Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
---
 drivers/hwtracing/coresight/coresight-etm-perf.c | 21 ++++++++--------
 drivers/hwtracing/coresight/coresight-etm-perf.h | 31 ++++++++++++++++++++++++
 2 files changed, 42 insertions(+), 10 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 3805282b97e8..bf4b105e0f41 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/perf_event.h>
+#include <linux/perf/arm_pmu.h>
 #include <linux/percpu-defs.h>
 #include <linux/slab.h>
 #include <linux/stringhash.h>
@@ -50,22 +51,22 @@ struct etm_ctxt {
 static DEFINE_PER_CPU(struct etm_ctxt, etm_ctxt);
 static DEFINE_PER_CPU(struct coresight_device *, csdev_src);
 
-PMU_FORMAT_ATTR(cycacc,		"config:" __stringify(ETM_OPT_CYCACC));
-PMU_FORMAT_ATTR(timestamp,	"config:" __stringify(ETM_OPT_TS));
-PMU_FORMAT_ATTR(retstack,	"config:" __stringify(ETM_OPT_RETSTK));
-PMU_FORMAT_ATTR(sinkid,		"config2:0-31");
+GEN_PMU_FORMAT_ATTR(cycacc);
+GEN_PMU_FORMAT_ATTR(timestamp);
+GEN_PMU_FORMAT_ATTR(retstack);
+GEN_PMU_FORMAT_ATTR(sinkid);
 
 #if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X)
-PMU_FORMAT_ATTR(branch_broadcast, "config:"__stringify(ETM_OPT_BRANCH_BROADCAST));
+GEN_PMU_FORMAT_ATTR(branch_broadcast);
 /* contextid1 enables tracing CONTEXTIDR_EL1*/
-PMU_FORMAT_ATTR(contextid1,	"config:" __stringify(ETM_OPT_CTXTID));
+GEN_PMU_FORMAT_ATTR(contextid1);
 /* contextid2 enables tracing CONTEXTIDR_EL2*/
-PMU_FORMAT_ATTR(contextid2,	"config:" __stringify(ETM_OPT_CTXTID2));
+GEN_PMU_FORMAT_ATTR(contextid2);
 /* preset - if sink ID is used as a configuration selector */
-PMU_FORMAT_ATTR(preset,		"config:0-3");
+GEN_PMU_FORMAT_ATTR(preset);
 /* config ID - set if a system configuration is selected */
-PMU_FORMAT_ATTR(configid,	"config2:32-63");
-PMU_FORMAT_ATTR(cc_threshold,	"config3:0-11");
+GEN_PMU_FORMAT_ATTR(configid);
+GEN_PMU_FORMAT_ATTR(cc_threshold);
 
 /*
  * contextid always traces the "PID".  The PID is in CONTEXTIDR_EL1
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.h b/drivers/hwtracing/coresight/coresight-etm-perf.h
index 5febbcdb8696..c794087a0e99 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.h
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.h
@@ -20,6 +20,37 @@ struct cscfg_config_desc;
  */
 #define ETM_ADDR_CMP_MAX	8
 
+#define ATTR_CFG_FLD_preset_CFG			config
+#define ATTR_CFG_FLD_preset_LO			0
+#define ATTR_CFG_FLD_preset_HI			3
+#define ATTR_CFG_FLD_branch_broadcast_CFG	config
+#define ATTR_CFG_FLD_branch_broadcast_LO	8
+#define ATTR_CFG_FLD_branch_broadcast_HI	8
+#define ATTR_CFG_FLD_cycacc_CFG			config
+#define ATTR_CFG_FLD_cycacc_LO			12
+#define ATTR_CFG_FLD_cycacc_HI			12
+#define ATTR_CFG_FLD_contextid1_CFG		config
+#define ATTR_CFG_FLD_contextid1_LO		14
+#define ATTR_CFG_FLD_contextid1_HI		14
+#define ATTR_CFG_FLD_contextid2_CFG		config
+#define ATTR_CFG_FLD_contextid2_LO		15
+#define ATTR_CFG_FLD_contextid2_HI		15
+#define ATTR_CFG_FLD_timestamp_CFG		config
+#define ATTR_CFG_FLD_timestamp_LO		28
+#define ATTR_CFG_FLD_timestamp_HI		28
+#define ATTR_CFG_FLD_retstack_CFG		config
+#define ATTR_CFG_FLD_retstack_LO		29
+#define ATTR_CFG_FLD_retstack_HI		29
+#define ATTR_CFG_FLD_sinkid_CFG			config2
+#define ATTR_CFG_FLD_sinkid_LO			0
+#define ATTR_CFG_FLD_sinkid_HI			31
+#define ATTR_CFG_FLD_configid_CFG		config2
+#define ATTR_CFG_FLD_configid_LO		32
+#define ATTR_CFG_FLD_configid_HI		63
+#define ATTR_CFG_FLD_cc_threshold_CFG		config3
+#define ATTR_CFG_FLD_cc_threshold_LO		0
+#define ATTR_CFG_FLD_cc_threshold_HI		11
+
 /**
  * struct etm_filter - single instruction range or start/stop configuration.
  * @start_addr:	The address to start tracing on.

-- 
2.34.1