Support ECSPI dynamic burst feature for DMA mode

[PATCH 1/6] spi: imx: group spi_imx_dma_configure() with spi_imx_dma_transfer()

Posted by Carlos Song 6 days, 13 hours ago

Relocate spi_imx_dma_configure() next to spi_imx_dma_transfer() so that
all DMA-related functions are grouped together for better readability.
No functional changes.

Signed-off-by: Carlos Song <carlos.song@nxp.com>
---
 drivers/spi/spi-imx.c | 88 +++++++++++++++++++++----------------------
 1 file changed, 44 insertions(+), 44 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index b8b79bb7fec3..e78e02a84b50 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1282,50 +1282,6 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int spi_imx_dma_configure(struct spi_controller *controller)
-{
-	int ret;
-	enum dma_slave_buswidth buswidth;
-	struct dma_slave_config rx = {}, tx = {};
-	struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
-
-	switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) {
-	case 4:
-		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
-		break;
-	case 2:
-		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
-		break;
-	case 1:
-		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	tx.direction = DMA_MEM_TO_DEV;
-	tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
-	tx.dst_addr_width = buswidth;
-	tx.dst_maxburst = spi_imx->wml;
-	ret = dmaengine_slave_config(controller->dma_tx, &tx);
-	if (ret) {
-		dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
-		return ret;
-	}
-
-	rx.direction = DMA_DEV_TO_MEM;
-	rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
-	rx.src_addr_width = buswidth;
-	rx.src_maxburst = spi_imx->wml;
-	ret = dmaengine_slave_config(controller->dma_rx, &rx);
-	if (ret) {
-		dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
-		return ret;
-	}
-
-	return 0;
-}
-
 static int spi_imx_setupxfer(struct spi_device *spi,
 				 struct spi_transfer *t)
 {
@@ -1481,6 +1437,50 @@ static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
 	return secs_to_jiffies(2 * timeout);
 }
 
+static int spi_imx_dma_configure(struct spi_controller *controller)
+{
+	int ret;
+	enum dma_slave_buswidth buswidth;
+	struct dma_slave_config rx = {}, tx = {};
+	struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
+
+	switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) {
+	case 4:
+		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		break;
+	case 2:
+		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		break;
+	case 1:
+		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	tx.direction = DMA_MEM_TO_DEV;
+	tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
+	tx.dst_addr_width = buswidth;
+	tx.dst_maxburst = spi_imx->wml;
+	ret = dmaengine_slave_config(controller->dma_tx, &tx);
+	if (ret) {
+		dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
+		return ret;
+	}
+
+	rx.direction = DMA_DEV_TO_MEM;
+	rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
+	rx.src_addr_width = buswidth;
+	rx.src_maxburst = spi_imx->wml;
+	ret = dmaengine_slave_config(controller->dma_rx, &rx);
+	if (ret) {
+		dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 				struct spi_transfer *transfer)
 {
-- 
2.34.1

Re: [PATCH 1/6] spi: imx: group spi_imx_dma_configure() with spi_imx_dma_transfer()

Posted by Frank Li 6 days, 8 hours ago

On Tue, Nov 25, 2025 at 06:06:13PM +0800, Carlos Song wrote:
> Relocate spi_imx_dma_configure() next to spi_imx_dma_transfer() so that
> all DMA-related functions are grouped together for better readability.
> No functional changes.
>
> Signed-off-by: Carlos Song <carlos.song@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/spi/spi-imx.c | 88 +++++++++++++++++++++----------------------
>  1 file changed, 44 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index b8b79bb7fec3..e78e02a84b50 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -1282,50 +1282,6 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id)
>  	return IRQ_HANDLED;
>  }
>
> -static int spi_imx_dma_configure(struct spi_controller *controller)
> -{
> -	int ret;
> -	enum dma_slave_buswidth buswidth;
> -	struct dma_slave_config rx = {}, tx = {};
> -	struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
> -
> -	switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) {
> -	case 4:
> -		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
> -		break;
> -	case 2:
> -		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
> -		break;
> -	case 1:
> -		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
> -		break;
> -	default:
> -		return -EINVAL;
> -	}
> -
> -	tx.direction = DMA_MEM_TO_DEV;
> -	tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
> -	tx.dst_addr_width = buswidth;
> -	tx.dst_maxburst = spi_imx->wml;
> -	ret = dmaengine_slave_config(controller->dma_tx, &tx);
> -	if (ret) {
> -		dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
> -		return ret;
> -	}
> -
> -	rx.direction = DMA_DEV_TO_MEM;
> -	rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
> -	rx.src_addr_width = buswidth;
> -	rx.src_maxburst = spi_imx->wml;
> -	ret = dmaengine_slave_config(controller->dma_rx, &rx);
> -	if (ret) {
> -		dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
> -		return ret;
> -	}
> -
> -	return 0;
> -}
> -
>  static int spi_imx_setupxfer(struct spi_device *spi,
>  				 struct spi_transfer *t)
>  {
> @@ -1481,6 +1437,50 @@ static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
>  	return secs_to_jiffies(2 * timeout);
>  }
>
> +static int spi_imx_dma_configure(struct spi_controller *controller)
> +{
> +	int ret;
> +	enum dma_slave_buswidth buswidth;
> +	struct dma_slave_config rx = {}, tx = {};
> +	struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller);
> +
> +	switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) {
> +	case 4:
> +		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +		break;
> +	case 2:
> +		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
> +		break;
> +	case 1:
> +		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	tx.direction = DMA_MEM_TO_DEV;
> +	tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
> +	tx.dst_addr_width = buswidth;
> +	tx.dst_maxburst = spi_imx->wml;
> +	ret = dmaengine_slave_config(controller->dma_tx, &tx);
> +	if (ret) {
> +		dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
> +		return ret;
> +	}
> +
> +	rx.direction = DMA_DEV_TO_MEM;
> +	rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
> +	rx.src_addr_width = buswidth;
> +	rx.src_maxburst = spi_imx->wml;
> +	ret = dmaengine_slave_config(controller->dma_rx, &rx);
> +	if (ret) {
> +		dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
>  static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
>  				struct spi_transfer *transfer)
>  {
> --
> 2.34.1
>

[PATCH 1/6] spi: imx: group spi_imx_dma_configure() with spi_imx_dma_transfer()
[PATCH 2/6] spi: imx: introduce helper to clear DMA mode logic
[PATCH 3/6] spi: imx: avoid dmaengine_terminate_all() on TX prep failure
[PATCH 4/6] spi: imx: handle DMA submission errors with dma_submit_error()
[PATCH 5/6] spi: imx: support dynamic burst length for ECSPI DMA mode
[PATCH 6/6] spi: imx: enable DMA mode for target operation