Add the bootph-all property to the phy_gmii_sel node to ensure it is
available during all boot phases. This is required when the bootloader
is getting booted via network.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi  | 4 ++++
 arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index eeca643fedbe..c6de3ee30bf5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -358,6 +358,10 @@ serial_flash: flash@0 {
 	};
 };
 
+&phy_gmii_sel {
+	bootph-all;
+};
+
 &sdhci0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index b3d012a5a26a..faeede4f2950 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -350,6 +350,10 @@ serial_flash: flash@0 {
 	};
 };
 
+&phy_gmii_sel {
+	bootph-all;
+};
+
 &sdhci0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-- 
2.48.1