There are two reset conctrollers on Cix Sky1 Soc.
One is located in S0 domain, and the other is located
in S5 domain.

Signed-off-by: Gary Yang <gary.yang@cixtech.com>
---
 arch/arm64/boot/dts/cix/sky1.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index d21387224e79..72ebffe05ef7 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -348,6 +348,12 @@ i3c1: i3c@4100000 {
 			status = "disabled";
 		};
 
+		src_fch: reset-controller@4160008 {
+			compatible = "cix,sky1-rst-fch";
+			reg = <0x0 0x04160008 0x0 0xc>;
+			#reset-cells = <1>;
+		};
+
 		iomuxc: pinctrl@4170000 {
 			compatible = "cix,sky1-iomuxc";
 			reg = <0x0 0x04170000 0x0 0x1000>;
@@ -568,6 +574,14 @@ ppi_partition1: interrupt-partition-1 {
 			};
 		};
 
+		src: reset-controller@16000304 {
+			compatible = "cix,sky1-rst";
+			reg = <0x0 0x16000304 0x0 0xc>,
+			      <0x0 0x16000400 0x0 0x10>,
+			      <0x0 0x16000800 0x0 0x8>;
+			#reset-cells = <1>;
+		};
+
 		iomuxc_s5: pinctrl@16007000 {
 			compatible = "cix,sky1-iomuxc-s5";
 			reg = <0x0 0x16007000 0x0 0x1000>;
-- 
2.49.0