Prefer the new "rx-polarity" and "tx-polarity" properties, and use the
vendor specific ones as fallback if the standard description doesn't
exist.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/phy/Kconfig       |  1 +
 drivers/net/phy/air_en8811h.c | 50 ++++++++++++++++++++++++-----------
 2 files changed, 36 insertions(+), 15 deletions(-)

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index a7ade7b95a2e..7b73332a13d9 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -98,6 +98,7 @@ config AS21XXX_PHY
 
 config AIR_EN8811H_PHY
 	tristate "Airoha EN8811H 2.5 Gigabit PHY"
+	select PHY_COMMON_PROPS
 	help
 	  Currently supports the Airoha EN8811H PHY.
 
diff --git a/drivers/net/phy/air_en8811h.c b/drivers/net/phy/air_en8811h.c
index badd65f0ccee..4171fecb1def 100644
--- a/drivers/net/phy/air_en8811h.c
+++ b/drivers/net/phy/air_en8811h.c
@@ -14,6 +14,7 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/phy.h>
+#include <linux/phy/phy-common-props.h>
 #include <linux/firmware.h>
 #include <linux/property.h>
 #include <linux/wordpart.h>
@@ -966,11 +967,42 @@ static int en8811h_probe(struct phy_device *phydev)
 	return 0;
 }
 
+static int en8811h_config_serdes_polarity(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	int pol, default_pol;
+	u32 pbus_value = 0;
+
+	default_pol = PHY_POL_NORMAL;
+	if (device_property_read_bool(dev, "airoha,pnswap-rx"))
+		default_pol = PHY_POL_INVERT;
+
+	pol = phy_get_rx_polarity(dev_fwnode(dev), phy_modes(phydev->interface),
+				  PHY_POL_NORMAL | PHY_POL_INVERT, default_pol);
+	if (pol < 0)
+		return pol;
+	if (pol == PHY_POL_INVERT)
+		pbus_value |= EN8811H_POLARITY_RX_REVERSE;
+
+	default_pol = PHY_POL_NORMAL;
+	if (device_property_read_bool(dev, "airoha,pnswap-tx"))
+		default_pol = PHY_POL_INVERT;
+
+	pol = phy_get_tx_polarity(dev_fwnode(dev), phy_modes(phydev->interface),
+				  PHY_POL_NORMAL | PHY_POL_INVERT, default_pol);
+	if (pol < 0)
+		return pol;
+	if (pol == PHY_POL_NORMAL)
+		pbus_value |= EN8811H_POLARITY_TX_NORMAL;
+
+	return air_buckpbus_reg_modify(phydev, EN8811H_POLARITY,
+				       EN8811H_POLARITY_RX_REVERSE |
+				       EN8811H_POLARITY_TX_NORMAL, pbus_value);
+}
+
 static int en8811h_config_init(struct phy_device *phydev)
 {
 	struct en8811h_priv *priv = phydev->priv;
-	struct device *dev = &phydev->mdio.dev;
-	u32 pbus_value;
 	int ret;
 
 	/* If restart happened in .probe(), no need to restart now */
@@ -1003,19 +1035,7 @@ static int en8811h_config_init(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	/* Serdes polarity */
-	pbus_value = 0;
-	if (device_property_read_bool(dev, "airoha,pnswap-rx"))
-		pbus_value |=  EN8811H_POLARITY_RX_REVERSE;
-	else
-		pbus_value &= ~EN8811H_POLARITY_RX_REVERSE;
-	if (device_property_read_bool(dev, "airoha,pnswap-tx"))
-		pbus_value &= ~EN8811H_POLARITY_TX_NORMAL;
-	else
-		pbus_value |=  EN8811H_POLARITY_TX_NORMAL;
-	ret = air_buckpbus_reg_modify(phydev, EN8811H_POLARITY,
-				      EN8811H_POLARITY_RX_REVERSE |
-				      EN8811H_POLARITY_TX_NORMAL, pbus_value);
+	ret = en8811h_config_serdes_polarity(phydev);
 	if (ret < 0)
 		return ret;
 
-- 
2.34.1