From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

In order to correctly handle the interaction between the reset-gpio
devices and shared GPIOs managed by GPIOLIB, we need to be able to
identify the former. Add the "compatible" property to allow us to use
the device_is_compatible() helper.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
Philipp: this can go directly into your branch, I will fix the GPIO part
in the next cycle. For now it just parses the device name.

 drivers/reset/core.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 843cffc939097..b56dace6c42ed 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -898,11 +898,11 @@ static int reset_add_gpio_aux_device(struct device *parent,
  */
 static int __reset_add_reset_gpio_device(const struct of_phandle_args *args)
 {
-	struct property_entry properties[2] = { };
+	struct property_entry properties[3] = { };
 	unsigned int offset, of_flags, lflags;
 	struct reset_gpio_lookup *rgpio_dev;
 	struct device *parent;
-	int id, ret;
+	int id, ret, prop = 0;
 
 	/*
 	 * Currently only #gpio-cells=2 is supported with the meaning of:
@@ -953,7 +953,8 @@ static int __reset_add_reset_gpio_device(const struct of_phandle_args *args)
 
 	lflags = GPIO_PERSISTENT | (of_flags & GPIO_ACTIVE_LOW);
 	parent = gpio_device_to_device(gdev);
-	properties[0] = PROPERTY_ENTRY_GPIO("reset-gpios", parent->fwnode, offset, lflags);
+	properties[prop++] = PROPERTY_ENTRY_STRING("compatible", "reset-gpio");
+	properties[prop++] = PROPERTY_ENTRY_GPIO("reset-gpios", parent->fwnode, offset, lflags);
 
 	id = ida_alloc(&reset_gpio_ida, GFP_KERNEL);
 	if (id < 0)
-- 
2.51.0

On Fr, 2025-11-21 at 14:57 +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> In order to correctly handle the interaction between the reset-gpio
> devices and shared GPIOs managed by GPIOLIB, we need to be able to
> identify the former. Add the "compatible" property to allow us to use
> the device_is_compatible() helper.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
> Philipp: this can go directly into your branch, I will fix the GPIO part
> in the next cycle. For now it just parses the device name.

Applied to reset/next, thanks!

[1/1] reset: gpio: add the "compatible" property
      https://git.pengutronix.de/cgit/pza/linux/commit/?id=a0d57f7504b6

regards
Philipp

On Fr, 2025-11-21 at 14:57 +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> In order to correctly handle the interaction between the reset-gpio
> devices and shared GPIOs managed by GPIOLIB, we need to be able to
> identify the former. Add the "compatible" property to allow us to use
> the device_is_compatible() helper.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp