[PATCH 1/8] pinctrl: renesas: rzt2h: move GPIO enable/disable into separate function

Cosmin Tanislav posted 8 patches 1 week, 3 days ago
[PATCH 1/8] pinctrl: renesas: rzt2h: move GPIO enable/disable into separate function
Posted by Cosmin Tanislav 1 week, 3 days ago
GPIO is enabled or disabled in multiple places, simplify code by moving
this logic into a separate function.

Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzt2h.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzt2h.c b/drivers/pinctrl/renesas/pinctrl-rzt2h.c
index 4826ff91cd90..c8ca5e13bba7 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzt2h.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzt2h.c
@@ -119,6 +119,19 @@ static int rzt2h_validate_pin(struct rzt2h_pinctrl *pctrl, unsigned int offset)
 	return (pincfg & BIT(pin)) ? 0 : -EINVAL;
 }
 
+static void rzt2h_pinctrl_set_gpio_en(struct rzt2h_pinctrl *pctrl,
+				      u8 port, u8 pin, bool en)
+{
+	u8 reg = rzt2h_pinctrl_readb(pctrl, port, PMC(port));
+
+	if (en)
+		reg &= ~BIT(pin);
+	else
+		reg |= BIT(pin);
+
+	rzt2h_pinctrl_writeb(pctrl, port, reg, PMC(port));
+}
+
 static void rzt2h_pinctrl_set_pfc_mode(struct rzt2h_pinctrl *pctrl,
 				       u8 port, u8 pin, u8 func)
 {
@@ -133,8 +146,7 @@ static void rzt2h_pinctrl_set_pfc_mode(struct rzt2h_pinctrl *pctrl,
 	rzt2h_pinctrl_writew(pctrl, port, reg16, PM(port));
 
 	/* Temporarily switch to GPIO mode with PMC register */
-	reg16 = rzt2h_pinctrl_readb(pctrl, port, PMC(port));
-	rzt2h_pinctrl_writeb(pctrl, port, reg16 & ~BIT(pin), PMC(port));
+	rzt2h_pinctrl_set_gpio_en(pctrl, port, pin, true);
 
 	/* Select Pin function mode with PFC register */
 	reg64 = rzt2h_pinctrl_readq(pctrl, port, PFC(port));
@@ -142,8 +154,7 @@ static void rzt2h_pinctrl_set_pfc_mode(struct rzt2h_pinctrl *pctrl,
 	rzt2h_pinctrl_writeq(pctrl, port, reg64 | ((u64)func << (pin * 8)), PFC(port));
 
 	/* Switch to Peripheral pin function with PMC register */
-	reg16 = rzt2h_pinctrl_readb(pctrl, port, PMC(port));
-	rzt2h_pinctrl_writeb(pctrl, port, reg16 | BIT(pin), PMC(port));
+	rzt2h_pinctrl_set_gpio_en(pctrl, port, pin, false);
 }
 
 static int rzt2h_pinctrl_set_mux(struct pinctrl_dev *pctldev,
@@ -447,7 +458,6 @@ static int rzt2h_gpio_request(struct gpio_chip *chip, unsigned int offset)
 	u8 port = RZT2H_PIN_ID_TO_PORT(offset);
 	u8 bit = RZT2H_PIN_ID_TO_PIN(offset);
 	int ret;
-	u8 reg;
 
 	ret = rzt2h_validate_pin(pctrl, offset);
 	if (ret)
@@ -460,9 +470,7 @@ static int rzt2h_gpio_request(struct gpio_chip *chip, unsigned int offset)
 	guard(spinlock_irqsave)(&pctrl->lock);
 
 	/* Select GPIO mode in PMC Register */
-	reg = rzt2h_pinctrl_readb(pctrl, port, PMC(port));
-	reg &= ~BIT(bit);
-	rzt2h_pinctrl_writeb(pctrl, port, reg, PMC(port));
+	rzt2h_pinctrl_set_gpio_en(pctrl, port, bit, true);
 
 	return 0;
 }
-- 
2.52.0