It's a requirement that DT overlays be applied at build time in order to
validate them as overlays are not validated on their own.

Add the missing TI overlays. Some of the TI overlays have the first part
needed (a "*-dtbs" variable), but not the second part adding the target to
dtb-y/dtb- variable.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
[vigneshr@ti.com: create new target for J721e GESI EVM]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
v2:

Drop PHYTEC bits as there is a separate patch
introduce k3-j721e-evm-gesi-dtbs as new target

v1: https://lore.kernel.org/linux-arm-kernel/20251117211316.725960-1-robh@kernel.org/

 arch/arm64/boot/dts/ti/Makefile | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index c85a37cdb351..cf0c11a68761 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -119,9 +119,11 @@ dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm-pcie1-ep.dtbo
 
 # Boards with J721e SoC
 k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo
+k3-j721e-evm-gesi-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board-infotainment.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie1-ep.dtbo
@@ -192,6 +194,7 @@ k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \
 	k3-am62x-sk-csi2-tevi-ov5640.dtbo
 k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
 k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62-lp-sk-nand-dtbs := k3-am62-lp-sk.dtb k3-am62-lp-sk-nand.dtbo
 k3-am62a7-phyboard-lyra-disable-eth-phy-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
 	k3-am6xx-phycore-disable-eth-phy.dtbo
 k3-am62a7-phyboard-lyra-disable-rtc-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
@@ -289,6 +292,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am625-sk-csi2-tevi-ov5640.dtb \
 	k3-am625-sk-hdmi-audio.dtb \
 	k3-am62-lp-sk-hdmi-audio.dtb \
+	k3-am62-lp-sk-nand.dtb \
 	k3-am62a7-phyboard-lyra-disable-eth-phy.dtb \
 	k3-am62a7-phyboard-lyra-disable-rtc.dtb \
 	k3-am62a7-phyboard-lyra-disable-spi-nor.dtb \
-- 
2.49.0

Hi Rob,

On Thu, 20 Nov 2025 19:49:36 +0530, Vignesh Raghavendra wrote:
> It's a requirement that DT overlays be applied at build time in order to
> validate them as overlays are not validated on their own.
> 
> Add the missing TI overlays. Some of the TI overlays have the first part
> needed (a "*-dtbs" variable), but not the second part adding the target to
> dtb-y/dtb- variable.
> 
> [...]

Fixed the authorship to Rob locally before applying the patch

[1/1] arm64: dts: ti: Add missing applied DT overlay targets
      commit: 56ca5a3030143906d27a0ce3e999fdd633a6e91d

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh