If a port interrupt setup fails after at least one port has already been
successfully initialized, the gotos miss some resource releasing:
- the already initialized PTP IRQs aren't released
- the already initialized port IRQs aren't released if the failure
occurs in ksz_pirq_setup().

Merge 'out_girq' and 'out_ptpirq' into a single 'port_release' label.
Behind this label, use the reverse loop to release all IRQ resources
for all initialized ports.
Jump in the middle of the reverse loop if an error occurs in
ksz_ptp_irq_setup() to only release the port IRQ of the current
iteration.

Cc: stable@vger.kernel.org
Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link")
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
---
 drivers/net/dsa/microchip/ksz_common.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 49827ac770e6fcc9e4a1a11e8814cdd90b17473e..96f37b8e72d160aeb265ef9c4d49f81d1c23abd9 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -3036,12 +3036,12 @@ static int ksz_setup(struct dsa_switch *ds)
 		dsa_switch_for_each_user_port(dp, dev->ds) {
 			ret = ksz_pirq_setup(dev, dp->index);
 			if (ret)
-				goto out_girq;
+				goto port_release;
 
 			if (dev->info->ptp_capable) {
 				ret = ksz_ptp_irq_setup(ds, dp->index);
 				if (ret)
-					goto out_pirq;
+					goto pirq_release;
 			}
 		}
 	}
@@ -3051,7 +3051,7 @@ static int ksz_setup(struct dsa_switch *ds)
 		if (ret) {
 			dev_err(dev->dev, "Failed to register PTP clock: %d\n",
 				ret);
-			goto out_ptpirq;
+			goto port_release;
 		}
 	}
 
@@ -3074,17 +3074,16 @@ static int ksz_setup(struct dsa_switch *ds)
 out_ptp_clock_unregister:
 	if (dev->info->ptp_capable)
 		ksz_ptp_clock_unregister(ds);
-out_ptpirq:
-	if (dev->irq > 0 && dev->info->ptp_capable)
-		dsa_switch_for_each_user_port(dp, dev->ds)
-			ksz_ptp_irq_free(ds, dp->index);
-out_pirq:
-	if (dev->irq > 0)
-		dsa_switch_for_each_user_port_continue_reverse(dp, dev->ds)
+port_release:
+	if (dev->irq > 0) {
+		dsa_switch_for_each_user_port_continue_reverse(dp, dev->ds) {
+			if (dev->info->ptp_capable)
+				ksz_ptp_irq_free(ds, dp->index);
+pirq_release:
 			ksz_irq_free(&dev->ports[dp->index].pirq);
-out_girq:
-	if (dev->irq > 0)
+		}
 		ksz_irq_free(&dev->girq);
+	}
 
 	return ret;
 }

-- 
2.51.1