[PATCH] arm64: dts: ti: Enable build testing of PHYTEC board overlays

Wadim Egorov posted 1 patch 1 week, 5 days ago
arch/arm64/boot/dts/ti/Makefile | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
[PATCH] arm64: dts: ti: Enable build testing of PHYTEC board overlays
Posted by Wadim Egorov 1 week, 5 days ago
Add missing PHYTEC overlay build targets so they are included in
CONFIG_OF_ALL_DTBS coverage. This ensures all PHYTEC board-overlay
combinations are apply-tested during build time testing.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 arch/arm64/boot/dts/ti/Makefile | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 743115b849a7a..0b14767e50d3b 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -177,6 +177,16 @@ k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \
 	k3-am62x-sk-csi2-tevi-ov5640.dtbo
 k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
 k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62a7-phyboard-lyra-disable-eth-phy-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-disable-eth-phy.dtbo
+k3-am62a7-phyboard-lyra-disable-rtc-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-disable-rtc.dtbo
+k3-am62a7-phyboard-lyra-disable-spi-nor-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-disable-spi-nor.dtbo
+k3-am62a7-phyboard-lyra-gpio-fan-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am62x-phyboard-lyra-gpio-fan.dtbo
+k3-am62a7-phyboard-lyra-qspi-nor-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-qspi-nor.dtbo
 k3-am62a7-sk-csi2-imx219-dtbs := k3-am62a7-sk.dtb \
 	k3-am62x-sk-csi2-imx219.dtbo
 k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \
@@ -254,11 +264,21 @@ k3-j784s4-evm-usxgmii-exp1-exp2-dtbs := k3-j784s4-evm.dtb \
 	k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
 dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am625-beagleplay-csi2-tevi-ov5640.dtb \
+	k3-am625-phyboard-lyra-disable-eth-phy.dtb \
+	k3-am625-phyboard-lyra-disable-rtc.dtb \
+	k3-am625-phyboard-lyra-disable-spi-nor.dtb \
+	k3-am625-phyboard-lyra-gpio-fan.dtb \
+	k3-am625-phyboard-lyra-qspi-nor.dtb \
 	k3-am625-sk-csi2-imx219.dtb \
 	k3-am625-sk-csi2-ov5640.dtb \
 	k3-am625-sk-csi2-tevi-ov5640.dtb \
 	k3-am625-sk-hdmi-audio.dtb \
 	k3-am62-lp-sk-hdmi-audio.dtb \
+	k3-am62a7-phyboard-lyra-disable-eth-phy.dtb \
+	k3-am62a7-phyboard-lyra-disable-rtc.dtb \
+	k3-am62a7-phyboard-lyra-disable-spi-nor.dtb \
+	k3-am62a7-phyboard-lyra-gpio-fan.dtb \
+	k3-am62a7-phyboard-lyra-qspi-nor.dtb \
 	k3-am62a7-sk-csi2-imx219.dtb \
 	k3-am62a7-sk-csi2-ov5640.dtb \
 	k3-am62a7-sk-hdmi-audio.dtb \
@@ -268,6 +288,13 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am642-evm-icssg1-dualemac.dtb \
 	k3-am642-evm-icssg1-dualemac-mii.dtb \
 	k3-am642-evm-pcie0-ep.dtb \
+	k3-am642-phyboard-electra-disable-eth-phy.dtb \
+	k3-am642-phyboard-electra-disable-rtc.dtb \
+	k3-am642-phyboard-electra-disable-spi-nor.dtb \
+	k3-am642-phyboard-electra-gpio-fan.dtb \
+	k3-am642-phyboard-electra-pcie-usb2.dtb \
+	k3-am642-phyboard-electra-peb-c-010.dtb \
+	k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtb \
 	k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
 	k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
 	k3-am68-sk-base-board-csi2-dual-imx219.dtb \
-- 
2.48.1
Re: [PATCH] arm64: dts: ti: Enable build testing of PHYTEC board overlays
Posted by Vignesh Raghavendra 1 week, 3 days ago
Hi Wadim Egorov,

On Wed, 19 Nov 2025 04:32:16 -0800, Wadim Egorov wrote:
> Add missing PHYTEC overlay build targets so they are included in
> CONFIG_OF_ALL_DTBS coverage. This ensures all PHYTEC board-overlay
> combinations are apply-tested during build time testing.
> 
> 

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: Enable build testing of PHYTEC board overlays
      commit: 7026f224e21cc0fb6056bbddeb8221265cbb7645

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh