T99W760 modem is based on Qualcomm SDX35 chipset.
It use the same channel settings with Foxconn SDX61.
edl file has been committed to linux-firmware.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
---
drivers/bus/mhi/host/pci_generic.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 3d8c9729fcfc..e3bc737313a2 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -663,6 +663,17 @@ static const struct mhi_pci_dev_info mhi_foxconn_t99w696_info = {
.sideband_wake = false,
};
+static const struct mhi_pci_dev_info mhi_foxconn_t99w760_info = {
+ .name = "foxconn-t99w760",
+ .edl = "qcom/sdx35/foxconn/xbl_s_devprg_ns.melf",
+ .edl_trigger = true,
+ .config = &modem_foxconn_sdx61_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .mru_default = 32768,
+ .sideband_wake = false,
+};
+
static const struct mhi_channel_config mhi_mv3x_channels[] = {
MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 64, 0),
MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 64, 0),
@@ -1010,6 +1021,8 @@ static const struct pci_device_id mhi_pci_id_table[] = {
/* DW5934e(sdx72), Non-eSIM */
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe11e),
.driver_data = (kernel_ulong_t) &mhi_foxconn_dw5934e_info },
+ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe123),
+ .driver_data = (kernel_ulong_t) &mhi_foxconn_t99w760_info },
/* MV31-W (Cinterion) */
{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b3),
.driver_data = (kernel_ulong_t) &mhi_mv31_info },
--
2.25.1