The Mobileye EyeQ5 eval board (EPM) embeds two MDIO PHYs.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
index 9fc1a1b0a81b..babf52731ea6 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
+++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
@@ -29,3 +29,29 @@ temperature-sensor@48 {
 		label = "U60";
 	};
 };
+
+&macb0 {
+	phy-mode = "sgmii";
+	phy-handle = <&macb0_phy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		macb0_phy: ethernet-phy@e {
+			reg = <0xe>;
+		};
+	};
+};
+
+&macb1 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&macb1_phy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		macb1_phy: ethernet-phy@e {
+			reg = <0xe>;
+		};
+	};
+};

-- 
2.51.2