On 15/11/2025 04:26, Akhil R wrote:
> Update the timing parameters of Tegra256 so that the signals are complaint
> with the I2C specification for SCL low time.
>
> Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
> ---
> drivers/i2c/busses/i2c-tegra.c | 16 +++++++---------
> 1 file changed, 7 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index c0382c9a0430..8a696c88882e 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -1677,14 +1677,13 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
> .setup_hold_time_hs_mode = 0x090909,
> .has_interface_timing_reg = true,
> };
> -
Please don't remove this new line. Otherwise ...
> static const struct tegra_i2c_hw_feature tegra256_i2c_hw = {
> .has_continue_xfer_support = true,
> .has_per_pkt_xfer_complete_irq = true,
> .clk_divisor_hs_mode = 7,
> .clk_divisor_std_mode = 0x7a,
> .clk_divisor_fast_mode = 0x40,
> - .clk_divisor_fast_plus_mode = 0x19,
> + .clk_divisor_fast_plus_mode = 0x14,
> .has_config_load_reg = true,
> .has_multi_master_mode = true,
> .has_slcg_override_reg = true,
> @@ -1695,14 +1694,13 @@ static const struct tegra_i2c_hw_feature tegra256_i2c_hw = {
> .has_apb_dma = false,
> .tlow_std_mode = 0x8,
> .thigh_std_mode = 0x7,
> - .tlow_fast_mode = 0x3,
> - .thigh_fast_mode = 0x3,
> - .tlow_fastplus_mode = 0x3,
> - .thigh_fastplus_mode = 0x3,
> + .tlow_fast_mode = 0x4,
> + .thigh_fast_mode = 0x2,
> + .tlow_fastplus_mode = 0x4,
> + .thigh_fastplus_mode = 0x4,
> .setup_hold_time_std_mode = 0x08080808,
> - .setup_hold_time_fast_mode = 0x02020202,
> - .setup_hold_time_fastplus_mode = 0x02020202,
> - .setup_hold_time_hs_mode = 0x090909,
> + .setup_hold_time_fast_mode = 0x04010101,
> + .setup_hold_time_fastplus_mode = 0x04020202,
> .has_interface_timing_reg = true,
> };
>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Jon
--
nvpublic