Add bindings for lt8713sx.

Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
---
 Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml | 47 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml
new file mode 100644
index 000000000000..3292e149706c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt8713sx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT8713SX Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0/DP++ bridge-hub
+
+maintainers:
+  - Tony <syyang@lontium.com>
+
+description: |
+  The Lontium LT8713SX is a Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0 converter
+  that integrates one DP input and up to three configurable output interfaces
+  (DP1.4 / HDMI2.0 / DP++), with SST/MST functionality and audio support.
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt8713sx
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  reset-gpios:
+    description: GPIO connected to active high RESET pin.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        bridge@4f {
+            compatible = "lontium,lt8713sx";
+            reg = <0x4f>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+        };
+    };

-- 
2.34.1

On 15/11/2025 02:03, Vishnu Saini wrote:
> Add bindings for lt8713sx.
> 
> Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
> Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
> Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>

Incomplete or incorrectly ordered DCO chain. Please read submitting
patches so you understand what you have to certify.

> ---
>  Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml | 47 +++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml
> new file mode 100644
> index 000000000000..3292e149706c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml
> @@ -0,0 +1,47 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8713sx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Lontium LT8713SX Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0/DP++ bridge-hub
> +
> +maintainers:
> +  - Tony <syyang@lontium.com>
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  The Lontium LT8713SX is a Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0 converter
> +  that integrates one DP input and up to three configurable output interfaces
> +  (DP1.4 / HDMI2.0 / DP++), with SST/MST functionality and audio support.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - lontium,lt8713sx
> +
> +  reg:
> +    maxItems: 1
> +    description: I2C address of the device.

Drop description, obvious thus redundant.

> +
> +  reset-gpios:
> +    description: GPIO connected to active high RESET pin.
> +

Missing ports, supply.

> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c0 {

i2c

> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        bridge@4f {
> +            compatible = "lontium,lt8713sx";
> +            reg = <0x4f>;
> +            reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
> +        };
> +    };
> 


Best regards,
Krzysztof