From: Biju Das <biju.das.jz@bp.renesas.com>

Add sci_is_rsci_type() for RSCI port type. This will simplify the code
when the support added for RSCI_PORT_{SCI,SCIF} private PORT type.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v2->v3:
 * No change.
v1->v2:
 * No change.
---
 drivers/tty/serial/sh-sci.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 66ab85571230..2da36e8ce555 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1182,6 +1182,11 @@ static int sci_handle_errors(struct uart_port *port)
 	return copied;
 }
 
+static bool sci_is_rsci_type(u8 type)
+{
+	return (type == SCI_PORT_RSCI || type == RSCI_PORT_SCI || type == RSCI_PORT_SCIF);
+}
+
 static int sci_handle_fifo_overrun(struct uart_port *port)
 {
 	struct tty_port *tport = &port->state->port;
@@ -1190,7 +1195,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
 	int copied = 0;
 	u32 status;
 
-	if (s->type != SCI_PORT_RSCI) {
+	if (!sci_is_rsci_type(s->type)) {
 		reg = sci_getreg(port, s->params->overrun_reg);
 		if (!reg->size)
 			return 0;
@@ -1198,7 +1203,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
 
 	status = s->ops->read_reg(port, s->params->overrun_reg);
 	if (status & s->params->overrun_mask) {
-		if (s->type == SCI_PORT_RSCI) {
+		if (sci_is_rsci_type(s->type)) {
 			/*
 			 * All of the CFCLR_*C clearing bits match the corresponding
 			 * CSR_*status bits. So, reuse the overrun mask for clearing.
@@ -2015,7 +2020,7 @@ static irqreturn_t sci_tx_end_interrupt(int irq, void *ptr)
 	unsigned long flags;
 	u32 ctrl;
 
-	if (s->type != PORT_SCI && s->type != SCI_PORT_RSCI)
+	if (s->type != PORT_SCI && !sci_is_rsci_type(s->type))
 		return sci_tx_interrupt(irq, ptr);
 
 	uart_port_lock_irqsave(port, &flags);
@@ -3289,7 +3294,7 @@ static int sci_init_single(struct platform_device *dev,
 	 * The fourth interrupt on SCI and RSCI port is transmit end interrupt, so
 	 * shuffle the interrupts.
 	 */
-	if (p->type == PORT_SCI || p->type == SCI_PORT_RSCI)
+	if (p->type == PORT_SCI || sci_is_rsci_type(p->type))
 		swap(sci_port->irqs[SCIx_BRI_IRQ], sci_port->irqs[SCIx_TEI_IRQ]);
 
 	/* The SCI generates several interrupts. They can be muxed together or
-- 
2.43.0

Hi Biju,

On Fri, 14 Nov 2025 at 11:52, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> Add sci_is_rsci_type() for RSCI port type. This will simplify the code
> when the support added for RSCI_PORT_{SCI,SCIF} private PORT type.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

> --- a/drivers/tty/serial/sh-sci.c
> +++ b/drivers/tty/serial/sh-sci.c
> @@ -1182,6 +1182,11 @@ static int sci_handle_errors(struct uart_port *port)
>         return copied;
>  }
>
> +static bool sci_is_rsci_type(u8 type)
> +{
> +       return (type == SCI_PORT_RSCI || type == RSCI_PORT_SCI || type == RSCI_PORT_SCIF);

Would be much more consistent if all port types would use the
RSCI_PORT_* prefix...

> +}

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds